Parts Needed to Tow Small Trailer With 2005 Toyota Camry

Updated 05/16/2020 | Published 05/14/2020

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

(92)

$217.75

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(3802)

$13.96

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3802)

$9.10

Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs

(2249)

$41.20

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(38)

$41.89

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2905)

$2.89

Question:

Do you have a 2 inch receiver hitch for a 2005 toyota camry?

asked by: Frank

Expert Reply:

I have options for the Camry but there is not a 2" hitch receiver available for the 2005 Toyota Camry. Smaller vehicles like the Camry that are not designed to tow will sometimes not have 2" hitch receiver fits.

I recommend the Curt Class II trailer hitch part # C12339 because it is assembled in the USA. It is a 1-1/4" hitch but has a tongue weight rating of 300 lbs which is 100 lbs higher than most 1-1/4" hitches. I have attached an installation video for your reference.

If you plan on towing and need wiring, I recommend Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C55308 because it can handle a couple more amps per circuit to protect your vehicle's wiring.

You will also need the recommended ball mount Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs part # C45520 for ground and bumper clearance. If you need a 2" ball I recommend part # C40018 and for a 1-7/8" ball I recommend part # C40001. You will also need a pin and clip part # F-4.

Please let me know if you are not planning on towing but needed a 2" hitch for an existing accessory like a bike rack or cargo carrier. I can make additional recommendations.