Trailer Hitch Compatible with Liftgate Truck

Question

Question:

wondering if you carry a trailer hitch that will work with a liftgate?

asked by: Kurt M

0

Expert Reply:

We have many hitch options for a truck that has a lift gate, but very few of them are a simple bolt on custom application. Because the locations for attaching lift gates vary, you will need to use a weld on option like the Class V Universal Weld-on Receiver Hitch # 15903. There are many different bracket options for a hitch like # 4907 and # 4916.

expert reply by: Jason S

0

Answer 1

According to B&W the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit part #BWGNRK1020 is about a 2 hour install by a professional. All the Hardware is provided. I have attached the installation instructions so you…

view full answer...

Answer 2

I do have an option for you but there aren't any direct wiring adapters to go from a 4-round to a 7-blade. Therefore, you'll need to remove the 4-round and install a 7-blade which is really your best option since this is far more common for…

view full answer...

Answer 3

Hello Terran, While we don't have anything custom fit, there is an option, which is a universal weld-on hitch. Since your frame is more than 44 inches outside to outside, we have a pair of options depending on how much drop you need from the…

view full answer...

Answer 4

Hi Chris; the distance across the #C14011 from bolt hole to bolt hole is 34.49" on center. According to Curt, it is the same for all four sets of bolt holes. This hitch is designed to fit the 2000 - 2005 Ford Excursion.

view full answer...

Answer 5

In order to replace the trailer hitch on a motorhome you will need to go with a universal hitch as they do not offer bolt-on options for this. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-07 or part #41990-16…

view full answer...

Answer 6

I can definitely help set you up with everything you need to flat tow your 2023 Ford Expedition. Take a look at the list of parts below. I will start with the base plate and go from there. Base Plate - etrailer Invisible Base Plate Kit #e86YR Tow Bar…

view full answer...

Answer 7

I do have an option for you but most factory motorhome trailer hitches have a maximum capacity of 5,000 lbs. If you have a larger vehicle that you need to tow, this will have to be replaced. I don't have a bolt-on option for you but still an…

view full answer...

Answer 8

From what I was able to find, the Warn M12000 winch is 24.37" L. x 8.45" D. x 11" H. I've attached a picture with the dimensions on the Bulldog Winch Hitch Mounted Winch Plate #BDW20011 but since the mounting cradle is only…

view full answer...

Answer 9

Good news, I was able to go out to our warehouse and measure the Curt Class V Hitch #C15703. This Class V Trailer Hitch has a dimension of almost 5 inches from the top of the bolt holes to the top opening of the receiver hitch opening. This should…

view full answer...

Answer 10

While we do not have a receiver that is specifically designed to work with your 1996 Chevrolet C2500 having the Tommy liftgate, I do have some measurements that may help you determine if one will fit your truck. You will need to measure the height…

view full answer...

Answer 11

Typically the solution for your 2019 E-450 Cutaway is a universal hitch like the Curt #15903 you looked at. With the liftgate you will have to figure out if it will fit or not based on the placement and design of the liftgate. Some have too many…

view full answer...

Answer 12

Yes, the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16 is exactly what you are looking for as it has very tall side brackets which will be more than enough to get the receiver tube down under the rear bumper, adjustable…

view full answer...

Trailer Hitch Compatible with Liftgate Truck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching