Brake Controller Wiring Schematic for a 2010 Chevy Silverado

Question

Question:

We need the wiring schematics for a 2010 silverado

asked by: Dean

0

Expert Reply:

The 2010 Chevy Silverado will have a wire bundle tucked up under the dash, to the left of the steering column, held together with a white tag. The tag should also have the wire functions on it but we have learned that they are as follows:

Red/black on truck goes to brake controller black for 12 volt power. White on the truck goes to white on the controller for ground. Light blue/white on the truck goes to controller red for input from the brake switch. Dark blue on the truck goes to blue on the brake controller for output to the trailer brakes. The orange wire on the truck is not used.

I have included a link to an FAQ article that should help. There may be some additional connections you will need to make under the hood to make everything fully functional. The FAQ article covers these connections as well.

expert reply by: Michael H

0

Ken H.

3/14/2024

I have a 2005 Chevy Silverado 1500, I purchased a Briidea brake controller and an Oyviny brake controller adapter specified for the vehicle. I have to connect the wires to each other, will this be color coded? They both have 4 wires, black red white blue When watching some of the videos around they are crossing colors of wires. Just wondering which way is correct. Ken

Reply

Jesse M.

3/14/2024

@KenH The wires "should" be coded correctly so it will be red to red and black to black and so on. Emphasis on the word should. If they are not labeled, you can always use a wire tester to determine wire function.

Reply

Answer 1

Sometimes the fuses are already installed from the factory, but if not the fuse slots are in the front of the box. I have attached a picture that shows the location of fuse slots. I have also linked a video installation of a brake controller on a…

view full answer...

Answer 2

Castle Rock Tires like the #LHCK301 are perfectly fine trailer tires. I am aware of the stories people have, primarily with blowouts. However, in many cases tire failure was likely due to poor maintenance. Could it have been the Castle Rock tire?…

view full answer...

Answer 3

What you're seeing is the Shark fin style camera mount for a Furrion Vision S system like the #FOS05TASF but it looks like the camera was removed. You can install a new Furrion system by plugging the new camera to the existing wire and attaching…

view full answer...

Answer 4

The Derale stacked plate transmission coolers like part #D13403 can be mounted in any orientation that you need including having the hose fittings down. The line pressure from the transmission will push all of the fluid through the cooler regardless…

view full answer...

Answer 5

The only mattress that we would offer even close to that size with a center fold would be a 75" x 60". Denver Mattress Item #DE28ZR. It's 6-1/2" thick and constructed of a visco foam which is very comfortable while still being…

view full answer...

Answer 6

I would be happy to help you upgrade your 2022 Highlander's wiring harness so you can control your trailer's brakes. You're going to need the universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge…

view full answer...

Answer 7

No, but your local and state laws may require one. You will need to check anywhere you will be towing the trailer to determine if a breakaway system is required by law. They are also just a good idea in general because they will stop a run away…

view full answer...

Answer 8

For your Curt Q16 Series 5th Wheel Hitch we have the Replacement Hardware Kit #C16125-SK4. This kit includes 4 each of the needed bolts, flat washers, and lock washers. In order to get the quantity you need you will just want to order 2 of the kits.

view full answer...

Answer 9

There are only a handful of brake assemblies that have the provisions to add a parking brake and #AKEBRK-35 or #AKEBRK-35-SA do not have that feature. Dexter electric brake assembly kit #K23-086-087-00 does have the ability to add a parking brake…

view full answer...

Answer 10

There could be in internal short in the brake controller. Use a circuit tester like part #PTW2993 on the blue wire exiting the rear of the controller. There should be no voltage on that wire unless the brake pedal is pressed, or the manual brake…

view full answer...

Answer 11

Even with a 4-way already on your 1997 Chevy K2500, there will not be wires for a brake controller that are under the dash so you will need to run them yourself. And to install a brake controller you will need the Universal Installation Kit for…

view full answer...

Answer 12

On the 2010 Silverado/Sierra, there isn't a connector there are bare wires that you connect the brake controller to. Under the dash, between the emergency brake pedal and the brake, there's a wiring harness with a white tag on it (see circle…

view full answer...

Brake Controller Wiring Schematic for a 2010 Chevy Silverado

Featured Help Information

Miscellaneous Media

Continue Researching