Rear Air Bag Kit and Compressor Compatible With 2020 Ford F-150 and Fifth Wheel Hitch in Bed

Question

Question:

recommend air bag kit for my 2020 Ford F-150? 4wd with a fifth wheel hitch

asked by: Mike

0

Expert Reply:

I recommend the Air Lift LoadLifter 5000 Air Helper Springs part # AL57385 for the 2020 Ford F-150 4WD with a fifth wheel hitch in the bed because these bags are compatible with the fifth wheel hitch brackets without drilling. Some other air bag kits require drilling through the brackets of the fifth wheel hitch install kit to install them. The bags are also designed with a upper and lower roll plate to reduce the chance of the bag getting punctured.

You may consider adding a compressor system Air Lift WirelessONE Compressor System for Air Helper Springs part # AL25980 to the setup so you don't have to carry around a bulky compressor or stop at a gas station to use the air. The Air Lift WirelessONE Compressor is a wireless and includes a remote so you can deflate/inflate the bags from out side or inside the cab.

expert reply by: Heather A

0

Answer 1

I recommend the Air Lift LoadLifter 5000 Air Helper Springs part #AL57385 which are going to compatible with the in-bed hitch compared to other air bag brands that may require drilling into the fifth wheel bracket attached the truck's frame. The…

view full answer...

Answer 2

Yes, the Air Lift LoadLifter 5000 Air Helper Springs part #AL57385 for 4x4 or part #AL57268 for 4x2 which are a fit for a 2020 Ford F-150 (4x4) will work with a gooseneck trailer hitch like the B&W Turnoverball Underbed Gooseneck Trailer part…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

For your 2020 Ford F-150, you're going to need a set of tow bars, a braking system, wiring, and a base plate kit. For a base plate kit, I recommend going with the Roadmaster Crossbar-Style Base Plate Kit #RM-524431-4. This base plate creates a…

view full answer...

Answer 6

Hey there Nate, yes, the Weigh Safe Flap Jack Folding RV Stabilizing Block - 8" Tall - 6K #WS63ER will work great for your 2019 Grand Design Momentum 397TH that you say weighs 20,000lbs. The tongue weight / pin weight according to my sources…

view full answer...

Answer 7

Hello Chris. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76136 is going to be a great fit for your 2020 Ford F150, this hitch can handle a maximum tongue weight of 900 lbs (1,000 when using a weight distribution…

view full answer...

Answer 8

Hey Dustin, thanks for reaching out. I am not quite sure what you mean by sensor bars. Are you referring to the Firestone Automatic, Pneumatic Height-Control Valves #F2017? If so, we do offer an air bag kit/compressor system that can be used with…

view full answer...

Answer 9

Hi Keith; you can use a hacksaw or any power tool designed for cutting metal to cut the #LC84FR down to size.

view full answer...

Answer 10

Hey Jerry, for some reason your photo didn't come through; maybe you can email it to me so I can check it out and match something up - [email protected]. But if you have a distribution panel then I would go with this compact option:…

view full answer...

Rear Air Bag Kit and Compressor Compatible With 2020 Ford F-150 and Fifth Wheel Hitch in Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching