Dexter 008-256-07 Trailer Hub Replacement
Question:
I want replace my trailer hub assemblies. I have included a picture of the hub with a tag 8-256-07 5-5.00 BC. What are my choices for full assemblies? Thanks
asked by: Paul G
0
Expert Reply:
The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part # AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover.
Or, we have the part # 84550UC1-EZ which is already pre-greased and ready to install.
expert reply by:
Jameson C
0
click to enlarge
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased
- Video: The Low-Down on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Video: A Closer Look at the etrailer Trailer Idler Hub Assembly for 3,500-lb Axles
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Video: Feature Review Trailer Idler Hub Assembly for 3,500-lb Axles
- Shop: Brake Controller
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Square U-Bolts (Qty 2), 1-3/4" x 4" x 3/8"
- Shop: 42" Long Safety Chain with 5/16" Clevis Slip Hook - 5,000 lbs - Qty 1
- Search Results: tctscg70~842~06x1
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Wiring
- Search Results: a46pb
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 3015~p
- Search Results: pk12706
- Shop: Trailer Hitch
- Q&A: Differences Between Trailer Idler Hubs With a 5 on 5 Bolt Pattern
- Q&A: Pre-Greased Replacement 5-on-5 Hub for 3500-lb Dexter Axle
- Video: Hands-On with the Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles Spec Review
- Q&A: Recommended Replacement Coupler for Atwood 2 Inch Coupler
- Q&A: What is Angle of Redline A-Frame Coupler, part # CA5400
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Replacement A-Frame Trailer Coupler For 1978 Airstream With 50 Degree A-Frame
- Q&A: What Is The Angle For The etrailer A-Frame Trailer Coupler?
- Search Results: 5 on 5 hub
- Search Results: 295~000019
- Search Results: akihub~550~35~ez~k