What Is the Average PSI To Use Inside the Reese Goose Box Air Ride Coupler Adapter
Question:
What is the PSI range on the 20K Goose Box? The small cut-circle that indicates, minimal, standard, or max pressure does not tell me how much air I need to put in or take out. The circle indicator varies a lot when traveling and Im never sure if the air pressure is set correctly. According to instructions, the Standard is probably what I need set the majority of the time. So, when set at standard what would the PSI be ? Your answer would help me a great deal to get the best ride. Thanks
asked by: Sandy C
Helpful Expert Reply:
The correct psi to use in a Reese Goose Box Air Ride Coupler Adapter like part # RP85FR is going to vary by trailer. That said, you can start with 35-40 psi and then go from there to obtain the best combination of support and comfort. The max is 50 psi and the min is 5 psi so as long as you are between these two figures and happy with the support/comfort settings you are good to go.

Product Page this Question was Asked From
Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter - 20,000 lbs
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- 5th Wheel Trailer to Gooseneck Hitch
- No Extra Clearance
- 20000 lbs GTW
- Replaces Pin Box
- Shock Absorbing
- Fabex 600
- Lippert 0719
- Lippert 1621
- Lippert 1716
- Lippert Rhino
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Video: All You Need to Know About the Landing Gear Set
- Search Results: ranch hitch adapter
- Search Results: gooseneck hitch
- Shop: Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Curt 4-Way Flat Magnetic Connector Adapter
- Search Results: landing gear trailer jack
- Shop: Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
- Shop: Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter w/8" Offset for Short-Bed Trucks
- Shop: 24x84 etrailer Cargo Carrier for RV Bumper - Steel - Folding - 500 lbs
- Search Results: safety chains
- Video: Andersen Gooseneck and Fifth Wheel Adapters - Adapts Trailer - AM3139 Review
- Search Results: trailer brake lines
- Search Results: lc142178
- Search Results: trailer hubs and drums
- Q&A: Can 5th Wheel Trailer Pin Box Bolts be Installed from the Inside with the Nuts on the Outside
- Shop: Suspension Enhancement
- Video: Ultimate Overview of the 24x84 etrailer Cargo Carrier for RV Bumper
- Video: Installation: 24x84 etrailer Cargo Carrier for RV Bumper on a 2022 East to West Alta Travel Trailer
- Video: Hands-On with the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System
- Q&A: How To Determine What The Bolt Pattern Of Your Trailer's Pin Box
- Q&A: What is the Correct Pin Box for a 2018 Grand Design Momentum 376TH
- Q&A: How Will Taller Gooseneck Ball Affect Trailer Height on 2018 Ram 2500
- Video: B and W Companion OEM 5th Wheel Hitch with Slider Review
- Q&A: Will The Curve In The Malone Anti-Rattle HitchLock Plate Dig Into The Hitch Receiver
- Q&A: Does 5th Wheel Trailer Landing Gear Allow Jacks to Lift Individually
- Video: Camco RV Vents and Fans - Roof Vent - CAM40453 Review
- Shop: Front Mount Hitch
- Q&A: Will B&W Custom Headache Rack Block Cargo Camera on 2017 Ram 3500
Barry
1/3/2025
Conner, I'm getting a lot of click clack bounce back it seem. The tge truck bonuses then the trailer bonuses it seems the rebound back and forth. Any suggestions?