Comprehensive Review: Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter Video

In my experience the MORryde Wall Mount #MR82ZR will require additional mounting height to allow it to clear the storage door opening on most RV's. I have had better results using the Mount #MR38DR in the area you are looking to mount the TV.

Cooper, you're just going to need the Adapter Rails for Curt 5th Wheel Hitch #C47BR. This adapter will pop into your OEM pucks and provide a mounting point for your Curt A20 5th Wheel Trailer Hitch.

A gooseneck adapter cannot be used with the Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs #LC328329 because of the excess play and movement that would be present at the connection point. You would instead need to swap out your…

Hey Tom! The overall dimensions of the MORryde RV Cargo Sliding Tray - 48" x 42" #MR73FR are 48" long x 42" wide x 6-5/8" tall (see attached) - this is for the tray and the rails when they are assembled and installed…

You can use the Curt E16 fifth wheel hitch part #C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part #C47BR which converts the pucks to the rail kit style this hitch needs.

Absolutely! From the back of the pin box to the front of the Reese Goose Box 1716 #RP94716-61301 you mentioned is 36.45". I included a diagram showing all of the measurements of this pin box, and a video review for you to take a look at.

Hey David, so the easiest solution that is very cost effective would be to go with the Advent Air for Dometic Setups part #ACDOM135. This was specifically designed to replace Dometic units so the install is as easy as it can be since the wiring plugs…

Hey Michael, the Grand Design Reflection 100 series 27BH that you are interested in has a Lippert 1621 style pin box so the Goose Box you would want is the part #RP94716 which was designed to fit it. The part #RP94716-61301 is same Goose Box but it…

The Curt Ball and Safety Chain Loop Kit for Chevy, Ford, GM, and Nissan Underbed Gooseneck Trailer Hitch #C60692 does not need to be greased unless the mechanism isn't working properly. A spray penetrating spray grease works well, don't over…

Based on what you described you have a standard 4-bolt trailer brake assembly bolt pattern. For brake assemblies that match that and the 4,400 lb axle capacity you have you'd want the part #K23-478-00 for the left hand side and part #K23-479-00…

The correct hub/drum for a Dexter 4,400 Lb Axle is the Trailer Hub and Drum Assembly part #8-407-5UC3-EZ and then for the brakes you can use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #K23-478-479.

Yes, the Curt Q25 5th Wheel Hitch item #C16069 will fit in the factory puck system of a 2018 Chevy Silverado 2500. The base of this hitch will drop right down into the factory pucks. This hitch is recommended for trucks with the longer 8' beds or…