What is Typical Size for RV Screen Door Sliders

Question

Question:

Im looking for sliders for the entry door of my 03/04 Jayco Qwest 10x pop up camper. I need both the upper and lower sliders. So you have one that fits this specifically or is there a universal one?

asked by: Ron B

0

Expert Reply:

A pretty standard rv screen door slider dimension is right at around 12 inches like the part # LC234101 which most likely would work for you, but the best way would be to measure the slot dimension you have so you can verify what would be the correct size to fit.

I attached a link to all of the sliders we offer if you need a different size.

expert reply by: Jameson C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

The 14-foot dimension shown for the Solera 12V XL Power RV Awning #LCV000334942-362241 refers to the outside to outside spacing of the two included 78-inch-tall wall-mount vertical brackets that contain the awning support arms. The fabric canopy…

view full answer...

Answer 3

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hello Mark, Happy to help you find the right weight distribution hitch to meet your needs. I don’t have a database that supplies specs for trailers (though it would be pretty sweet if one existed), so based on my research, the Rockwood Mini Lite…

view full answer...

Answer 7

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

What is Typical Size for RV Screen Door Sliders

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching