Replacement Hardware Kit for Draw Tite Class V Hitch 41944

Question

Question:

I am looking for the Draw Tite Hardware Kit 41944. I have the hitch, need the hardware. Do you have it?

asked by: James

0

Expert Reply:

For replacement hardware to re-install the Draw-Tite Class V hitch # 41944 which fits various GMC and Chevy trucks you will use kit # RHK. Just enter that item into our search field and click GO. Then on that RHK page just enter the brand Draw-Tite and the part number # 41944 in the appropriate fields. We will put together a complete kit for you.

You can also refer to the linked instructions for this hitch which will tell you all of the tools needed as well as give you complete step by step installation guidance. An install video is linked too.

expert reply by: Adam R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

view full answer...

Answer 3

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hello Luke. Yes, the Curt Hitch #C43RV will indeed fit the 2025 Hyundai Kona Electric. Curt confirms this to fit the EV and N Line models of the 2025 Kona.

view full answer...

Answer 6

Hey Ethan yes, the Replacement Hardware Kit #RHK will include everything that originally came with your Curt Hitch #C11425. If there is anything else I can hep you with, please feel free to let me know!

view full answer...

Answer 7

Hey Jay, we actually sell replacement hardware for all of the hitches we sell with the part #RHK. On the product page you would just need to enter the hitch part number and we'll get you out the hardware that you need. Do you have either of those…

view full answer...

Answer 8

Hey Louis, thanks for stopping by! Since the Curt #C13105 and the etrailer #e98837 are basically the same hitch, it also is not going to be compatible with a hanging bike rack. Since this appears to be a trend with these bike racks, then I'd…

view full answer...

Answer 9

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

view full answer...

Replacement Hardware Kit for Draw Tite Class V Hitch 41944

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching