bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class V
  4. 2 Inch Hitch
  5. 13000
  6. Visible Cross Tube
Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Item # 41944
Our Price: $309.19
You Save: $148.52
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 66 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
Ideal for heavy-duty towing, this trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" part number 41944 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (293)
  • Q & A (0)
  • Photos

2004 Chevrolet Silverado - Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

  • Class V
  • 2 Inch Hitch
  • 13000
  • Visible Cross Tube
  • Draw-Tite
  • 1950
  • 16000 lbs WD GTW
  • 1600 lbs WD TW
  • Custom Fit Hitch

Ideal for heavy-duty towing, this trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Fully welded steel construction with computer-aided design ensures strength and durability
    • Heavy-duty side brackets are welded on
  • Reinforced, cast center section ensures the highest tongue weight capacity possible
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 13,000 lbs
      • Maximum GTW when used with weight distribution: 16,000 lbs
    • Maximum tongue weight: 1,950 lbs
      • Maximum TW when used with weight distribution: 1,600 lbs
  • Limited lifetime warranty

Ultra Frame Design with Cast Center Section

Specifically designed for a serious towing machine, this rugged trailer hitch receiver features the strong, durable construction that your heavy-duty applications require. The secure side-bracket design and all-frame attachment system ensure maximum stability. The cast center section lets you pile on the tongue weight without any worries. And the reinforced pin hole and large safety-chain loops better accommodate your heavy-duty towing needs.

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real-life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41944 Draw-Tite UltraFrame Class 5 Trailer Hitch Receiver with Cast Center

Installation Details 41944 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
13,000 lbs.

Tongue Weight (TW):
1,950 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.

Tongue Weight (TW):
1,600 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Hitch will fit with full size spare tire stowed under vehicle , If equipped with a factory hitch, the factory hitch will need to be removed to install this hitch

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" - 41944

Average Customer Rating:  4.8 out of 5 stars   (291 Customer Reviews)

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


Shipped fast. Packaged well. not happy about bare metal right out of the box. Very heavy duty. Haven't installed yet. I shouldn't have to put primer & paint on before installing this. Learned my lesson.Will buy local next time. Will be reviewing this on my YouTube channel.

2001 Chevrolet Silverado

It was a little confusing picking out the right hitch for this truck. After I saw the main difference was which bumper came from factory, that narrowed it down. The quality of the hitch and related parts was excellent! It could have been useful to have drawings of the hitches with measurements. Thank you for the help on the phone. I mounted it on Sat. 1/6/24. Good fit and nice hardware kit.

2006 Chevrolet Silverado

Nice quality hitch. Thick powder coat, beefy frame members. Took 15 minutes to install with an extra set of hands, (highly recommended as it is heavy). Instructions were a bit hard to make out as they were very faded in some areas. I found them online though and they are very straightforward and easy to follow. Highly recommend this hitch for your '01-'10 2500/3500 GM truck!

Jeffrey S.


Still very satisfied with this hitch after a year. My only complaint about it is that the safety chain part of it is a bit too thick as I had to slightly bend open the chain hooks on two of my trailers so that they could be attached to the hitch.


I was considering this unit or the comparable Curt Class V, and ultimately chose this which allows my oversized 285/75/16 spare to fit in the stock location. In addition, the hardware is included for use with- or without back bumper (mine is without). Easy install, no drilling required.

As far as etrailer - the large box arrived quickly and I appreciated the updates and post install follow up.


Spot that was damaged and had missing, powdercoat rusted, even with the suggested expensive paint applied three coats. Local purchases only going forward




Etrailer Expert

Jenny N.


@Jeremy Unfortunately it is the nature of hitches to rust over time, even if they had the best powder coat. We recommend using a rust resistant paint like Rustoleum to touch up the hitch from time to time.

2004 Chevrolet Silverado

Love the hitch. Very easy to switch from the old rusty to this new stud. Very strongly the fit. Total faith in this product. Thanks e-Trailer. Hard to believe 6 bolts can do it. I cut lots of wood, heavy hauls w/ my Silverado HD Duramax....I have a hitch that is as strong as my truck now.

Ted W.


Its great, I pull heavy trailers all the time. Love it. Thx.

2002 Chevrolet Silverado

Product is very well built, impressed with the quality of the hitch, much beefer than the stock hitch. Shipping container was pretty much trashed but everything was there. The diagram in the instructions were kind of faded and difficult to read, took us (two) 3 hrs to install with air tools. So far very satisfied, haven’t tow with it yet. Taking a trip in October 2018. We will see!



I was impressed with the quality of the product, its very heavy duty. Very satisfied with the product. Took us about 3 hours to install with power tools, instructions a little difficult to read, faded.


Fast Shipping! Great Communication! Great Price on brand name receiver!

2017 Dodge Ram Pickup

Hitch arrived in excellent condition due to good packaging. No scratches in the paintwork, which by the way appeared well prepared and painted.
Installation went relatively smoothly after the instructions were thoroughly understood. The reason I say relatively is that a Porta Power (hydraulic ram) was needed to spread the rear of the frame less than 1/4" to line up bolt holes. The vehicle is 17 years old and who knows what may have happened to the rear end of the frame by the previous owner(s).
I also ordered CurtT-Connector #55774 wiring harness which unfortunately arrived without the mounting hardware. The bracket and harness did arrive however the mounting screws and nuts did not. Luckily my son and I installed it at his garage so we had the needed hardware on hand.
Overall installation took us about 2 hours including spreading the frame and mounting the wiring harness.

2006 Chevrolet Silverado

hitch was really easy to install, the only problem i has was with the Review the Pro Series Lock-Tite Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - PS63100,the shaft wasn't long enough


This is a great replacement for my factory hitch, which was rusted away. This is way more rugged which suits my occasional heavy towing needs. I really like the height of the receiver to the bumper. Install was very easy, took longer to understand the instructions than the actual placement.


This hitch is absolutely awesome. Probably the most heavy duty hitch I have ever seen and the installation was super easy (about 45 minutes). The position of the hitch is great also, as it tucks under the bumper and is almost hidden, for a very clean look.

2004 Chevrolet Silverado

Ordering was very easy, came in a couple days. Mounted the hitch in less than an hour. Had to make a few changes due to the lack of a bumper on my truck (just installed a flatbed) .Looks to be a very well built hitch .

2004 Chevrolet Silverado

products that i ordered were shipped fast and arrived in good shape. I just put trailer hitch on with no problems. This looks and feels like a very strong, quality built product. I work in the the trucking industry as a mechanic and see thing that are built to last a long time. I see the same quality in this product as well


Hitch arrived before expected. Box was a bit beat up but hitch was in fine shape and well protected. Came with all the hardware needed to attach. Took about an hour to install. Bolted right on the frame of my 2002 2500HD 8’ bed. This is a way better hitch than OEM. I’m sure it will be the last hitch I buy for this truck.


Nice hitch. It fit perfect
Only thing
I don’t care for is chain hook loops are to big and cant get chains with hasp to latch closed.

2004 GMC Sierra

Quick shipping and bolted right up into my 2004 GMC Sierra 2500HD. Very happy to be towing again. Heavy duty and solid hitch.


the draw tite hitch is built just like the original factory hitch, and rated for more than the truck can handle. The packing was shoddy at best and mine arrived without most of the hardware. Seems they tape the hardware to the hitch and put it in a simple cardboard box, My ups man has the grace of a hand grenade so check the box for damage when it arrives. I figured they couldn't hurt a 90lb piece of welded steel, but they are more inventive than that. It took four phone calls and several emails over the course of a month to get the parts I needed to mount the hitch. Once I made enough noise they shipped me new hardware and it took less than an hour to mount. The hitch is heavy duty and well made and bolts on with no drilling. It would be easier to install if you have some help lifting it into position, but with some creative contortions one person can do it. If your looking for a hitch that fits right under the bumper this is a good choice. Getting the spare out of the way was the hard part , so I watched a video on the internet to figure that part out. Now I have a hitch for my new camper and the peace of mind knowing that thing is bolted on correctly and is part of the frame.

Mike M.


The Draw Tite hitch is well built and attaches easily,After a year in NY winter and summer it still looks like new and I,ve had no problems with the hitch. It is actually holding up better than some factory hitches I have seen as the powder coat is still shiny black and no rust is forming. I did recheck the bolts after a trip to Nashville and 16 hours of towing a 6000lb camper and had no issues. E-trailer made the experience of buying and installing easy and stood behind the product by helping with the missing parts,which was a life saver or more correctly a vacation saver. The parts arrived in the nick of time but they were as helpful as they could be. Overall I would use this same hitch if I had to replace the one I have..

Mike M.


After getting all the parts that were lost in transit it went on easily and works great. I will recommend E-Trailer to my friends.


Install went fairly easily and it looks great. Tough and beefy like a real hitch should. I especially like the square tubing over round. No play or give while towing heavy. Definitely suited my needs for a heavy duty hitch.

2005 Chevrolet Silverado

Ordered Sunday night, received Thursday. Packaging was in rough shape from .. dropping it in driveway. Minor scratches, easily painted over. All hardware was secured in plastic wrap. Easy to install, other than lifting into place without help. Ended up using jack stands to support while I lined up holes. This hitch seems to weigh about twice that of OEM installed hitch. ( brand unknown ). Hitch is approx. inch and a half higher than stock. Have not towed yet, need to recheck height for WD hitch setup. Found install video more helpful than directions from manufacturer.

Jim V.


Still happy with hitch. Heavy duty construction. Should outlast tow vehicle.

2004 Chevrolet Silverado

I got the hitch a day early ,it is very heavy duty but it is higher off the ground than my previous. Installed myself in about an hour on my 2004 Chevy Silverado 2500 HD with jack and plastic boxes. Very pleased no mods or any fitment problems. Glad I bought again from etrailer. Best price too.

2004 Chevrolet Silverado

Awesome product super heavy duty and an exact fit for my 2004 Chevrolet Silverado 2500hd. Thank you again etrailer


I replaced the original hitch on my 2003 GMC 2500HD with the Draw-Tite Ultra Frame hitch. It is built very heavy and installed easily. Much heavier than the factory hitch. Very good quality and price for what you get.


Hitch is made a lot heavier and better than my factory hitch. I regularly pull 10,000 pounds with no problem. I would definitely recommend this hitch. The service from etrailer is always great.



The hitch is doing great. The finish has held up well also.

2002 Chevrolet Silverado

I do not like writing reviews, but want to write this one.
This is rare for me- I am impressed with this product. This receiver is one severely built product. The design is good, the install was one of the easiest I have done. All the hardware needed was in the kit, no trips to the store, and was also good quality. Did not have to drill any holes, or stretch any.
And as for I have never had a bad experience with this company. I am very pleased to be able to say this.



The hitch is going to outlast the truck I installed it on. I intend to try to mount it on the 2007 I am now driving. And the next time I need a receiver, I know where to go, and what to get.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Best Trailer Hitch Receiver for a 2006 Chevrolet Silverado 2500HD with Service Body
    For your 2006 Chevrolet Silverado 2500HD with service body, I recommend using the Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41944 which has a gross trailer weight (GTW) rating of 13,000 lbs and tongue weight (TW) rating of 1,950 lbs. The Draw-Tite Ultra Frame is a Class V hitch with a 2" receiver tube opening. Please note that the vehicle will more than likely be the limiting factor in regards to GTW and TW capacities. None of our aftermarket trailer hitch manufacturers test...
    view full answer...
  • Will Draw-Tite Ultra Frame for 2006 Chevrolet Silverado 2500 Fit 6-1/2 Foot Bed or 8 Foot Bed
    What you saw about the Draw-Tite Ultra Frame # 41944 fitting the 6-1/2 foot bed and 8 foot bed models of the 2006 Chevrolet Silverado 2500 is correct. The hitch fits trucks with either bed length. It also fits the 3500 model. I've linked the installation details as well as a video of the hitch being installed for you. It doesn't require any drilling and will fit with a full size spare tire stored under your truck. If your truck already has a factory hitch it'll need to be removed.
    view full answer...
  • Will 7-Way Connector Mount 18157 Fit Draw-Tite Trailer Hitch Receiver 41944?
    I had our warehouse measure the crosstube on the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" # 41944 you were looking at and it is 3" as shown in the included diagram. To mount the 7-way connector you will need the # 18159 as it was designed to fit round or square crosstubes. I included videos of the products mentioned for you to take a look at.
    view full answer...
    Image 1 for
  • What Is The Measurement From The Mounting Flange To Top Of Receiver On Draw-Tite Trailer Hitch 41944
    I had our warehouse measure the Draw-Tite Trailer Hitch Receiver # 41944 you were looking at, and from the top of the mounting flange to the top of the receiver tube measures in at 3-1/4" as you can see in the included diagram. I included a video of the 41944 for you to take a look at.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch That Will Work With Full Size Spare on 2006 Chevrolet Silverado 2500
    The # 14108 trailer hitch is not a fit for your Silverado but we do offer a hitch that will work for you. I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver, part # 41944. This is a Class V hitch and it has a 2 inch receiver opening. This is a bolt-on installation and requires no drilling into the frame when installing. This hitch is designed to work with full size spare tires that are mounted under the truck. I have attached a link to an installation video for this hitch on...
    view full answer...
  • 13k Hitch Recommendation for a 2005 Chevy Silverado 2500 with 6-1/2 foot bed
    For your 2005 Chevy Silverado I would recommend the Draw Tite Hitch part # 41944. This hitch requires no drilling for installation, has a 13k capacity and will replace your current factory hitch. I attached an install video for you to check out as well.
    view full answer...
  • High Capacity Hitch Recommendation for 2002 Chevy Silverado 2500 HD
    It will not if your truck came from the factory with a pickup bed. The Draw-Tite # 41936 is for a cab and chassis truck which uses a narrower frame than the pickup. If you have the pickup, I'd recommend the Draw-Tite # 41944 which has a similar capacity of 13K towing and 1950 lbs of tongue weight. This is the most reasonably priced high capacity hitch we offer for your truck. I've linked to an installation video and the install instructions for you.
    view full answer...
  • High Towing Capacity Trailer Hitch that Fits 2002 GMC Sierra 2500
    The part # 41938 only fits the cab and chassis model trucks which have the narrower 34 inch wide frame width. For a higher capacity hitch that does fit your 2002 GMC Sierra 2500 from Draw Tite you'd want the # 41944 which has a trailer towing capacity of 13,000 lbs which would be most likely more than the capacity of your truck.
    view full answer...
  • How to Order Replacement Hitch Installation Hardware for Draw-Tite 41944 Class V Hitch
    Trailer hitches like the Draw-Tite Ultra Frame # 41944 must be installed using the exact hardware specified by the manufacturer. If alternate hardware is used the hitch's capacity could be reduced and such an installation would void the hitch warranty. We can get you a complete replacement hardware kit, part # RHK. This will be all of the original correct hardware to install this hitch on one of the compatible vehicles, such as your 2005 Silverado 3500. Just enter RHK in our search box...
    view full answer...
  • Replacement Hardware Kit for Draw Tite Class V Hitch 41944
    For replacement hardware to re-install the Draw-Tite Class V hitch # 41944 which fits various GMC and Chevy trucks you will use kit # RHK. Just enter that item into our search field and click GO. Then on that RHK page just enter the brand Draw-Tite and the part number # 41944 in the appropriate fields. We will put together a complete kit for you. You can also refer to the linked instructions for this hitch which will tell you all of the tools needed as well as give you complete step by...
    view full answer...
  • Recommended Class V Trailer Hitch for a 2005 Sierra 2500HD
    If you are looking for the most heavy duty option for your 2005 GMC Sierra 2500HD with an 8 foot bed, I suggest the Curt Class V Commercial Duty - 2-1/2" # C15703. This will have a 2,700 pound tongue weight and an 18,000 pound towing capacity.
    view full answer...
  • Trailer Hitch Receiver for 2005 Chevrolet Silverado 1500HD
    The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is not confirmed to fit on your 2005 Chevrolet 1500HD, it will only fit the 2500HD and 3500HD models. For your Silverado 1500HD I recommend the Curt Trailer Hitch Receiver # C15323. It has a maximum trailer weight of 16,000lbs or 17,000 with weight distribution hitch and 2,400lbs of tongue weight. This will not allow you to carry more than what your truck is rated for. I recommend contacting your dealer with your vin number for...
    view full answer...
  • Trailer Hitch Receiver Confirmed To Fit a 2008 Chevrolet Silverado 2500 Long Bed
    The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41944 is confirmed to fit your 2008 Chevrolet Silverado 2500 with the 8' long bed as long as you have the rear step bumper. If you have the 10" deep drop bumper you will need the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25187.
    view full answer...
  • Recommended Trailer Hitch For 2001 Chevrolet Silverado
    We have several trailer hitches that will fit your 2001 Silverado. One hitch I recommend is the Draw-Tite Max Frame, part # 75362. This is a Class lll hitch and it has a 2-inch receiver opening. If you prefer a more heavy-duty hitch I recommend the Draw-Tite Ultra Frame Trailer Hitch, part # 41944, This is a Class V hitch and it also has a 2-inch receiver opening. You will want to keep in mind that towing capacity is limited by the lowest rated component and even if the hitch is rated...
    view full answer...
  • Recommended 7-Way Trailer Connector and Mounting Bracket for a 2005 Chevrolet Silverado 3500
    Correct, the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center part # 41944 which is a fit for your 2005 Chevrolet Silverado 3500 doesn't have a bracket to mount the trailer connector. However, you can use the No-Drill Mount Bracket part # 18136 in order to do so. For a trailer wiring harness, I recommend the Reese Multi-Plug Wiring Harness part # 74682 which will provide you with both 4 and 7-way trailer connection points. I have attached a photo that shows the no-drill bracket...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for a 2003 Chevy Silverado 2500HD Flatbed
    The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41944 which is a fit for a 2003 Chevrolet Silverado 2500HD does have an option for installation without the factory rear bumper so it should work for you as you can see in the attached photo. Therefore, so long as there is nothing in the way of the receiver tube opening you would be good to go. If the flatbed does interfere with the receiver tube opening then you can go with the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25187...
    view full answer...
    Image 1 for
  • Height of Draw-Tite Trailer Hitch 41944 Compared to Factory Hitch on a 2006 GMC Sierra 2500
    There is maybe a 1/2 inch of space between the top of the receiver tube and the bottom of the bumper with hitch # 41944 installed on a 2006 GMC Sierra 2500. It is going to be positioned just about identically to the factory hitch which is to say just about up against the bottom of the bumper. For this hitch I recommend etrailer ball mount kit # EBMK2416 which comes with a ball mount, 2 balls, a hitch pin with clip, and a storage bag. The ball mount has a 3 in rise or 4 inch drop. If the...
    view full answer...
  • Can Wheels With An Offset Be Replaced By Wheels Without An Offset
    If you've had offset wheels on your trailer from the beginning then it was by design from the manufacturer and would not be an issue. Switching away from an offset could mean that the wheels/tires end up rubbing against the body of the trailer, brake calipers, suspension components, etc. so it's best to stick with what works unless you first measure and figure out how much clearance you have between the wheel and rest of the trailer. I've attached a link below to our wheel and tire options...
    view full answer...
  • Will Draw-Tite Trailer hitch 41944 Fit a 2006 Chevy Silverado with Aftermarket Exhaust
    I do not think that the larger exhaust is going to be an issue when installing Draw-Tite trailer hitch # 41944 on your 2006 Chevy Silverado. For the most part, the hitch is not all that close to the exhaust as you can see in the linked instructions and video. However, in the event that there is a little interference there is plenty of room beneath a truck to use a different exhaust hanger or bend a hanger so that there is no interference. I have included a link to our help article that...
    view full answer...
  • Trailer Hitch for a 2017 Chevy Silverado 2500 with Utility Bed
    The available trailer hitches for the 2017 Chevy Silverado 2500 were designed to fit stock models of the truck. The receiver on these models would be right below the rear bumper. If your utility body hangs lower than the stock bumper then none of the available trailer hitches will fit. If it does not hang any lower then you could use any of the hitches provided there isn't a tech tip or installation note that states you have to have the factory bumper for installation. I have linked the...
    view full answer...
  • Will Draw-Tite Class V Hitch 41944 Bolt Up to Bumper Bracket Like Factory Hitch
    We offer Class V hitches in both 2-inch and 2-1/2-inch sizes for your 2009 Chevrolet Silverado 2500. All are shown on the linked page. Draw-Tite's 2-inch hitch # 41944 is a no-drill install since it bolts up to the bumper bracket the same way as the factory hitch. Written instructions and a helpful video are linked for you.
    view full answer...
  • Where Are Draw-Tite Hitches Made?
    The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41944 for your 2004 GMC Sierra is made in Mexico. However, Curt hitches like Curt Trailer Hitch Receiver # C15312 are all made in the USA.
    view full answer...
  • Will Curt 13932 Trailer Hitch Receiver Fit 2007 GMC Sierra Classic 2500
    The Curt Trailer Hitch Receiver # 13932 is a confirmed fit for the 2007 GMC Sierra Classic 1500 with aftermarket Roll Pan Bumper. This will not fit your 2007 GMC Sierra Classic 2500. For a Class III hitch like this one that is confirmed to fir a 2007 GMC Sierra Classic 2500HD I recommend the Curt Trailer Hitch Receiver # C13108. This will fit a 6-1/2' bed. If you have an 8' bed, I recommend the Draw-Tite # 41944. Both have a concealed cross tube and a bolt on installation. Each of these...
    view full answer...
  • Will Draw-Tite Trailer Hitch 41939 Fit a 2004 Chevy Silverado 2500HD Long Bed
    Yes the Draw-Tite Trailer Hitch, # 41944, will fit a 2004 Chevy Silverado 2500HD long bed. I have included a link to the installation instructions for you to view. If you plan to do some towing, I recommend etrailer Ball Mount Kit, # EBMK2416, which comes with a ball mount, 2 balls, and pin with clip, and a carrying bag.
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Alexander C
Updated by:
Alexander C
Employee Matthew E
Updated by:
Matthew E
Employee Isabelle B
Updated by:
Isabelle B
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Edited by:
Wilson B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.