Trailer Hub that Fits 1 inch or 1-1/6 inch Diameter Spindle
Updated 10/16/2018 | Published 10/15/2018
Products Featured in This Question
Question:
Getting ready to replace torsion axle that has metric dimensions. Do they make a race/bearing set with metric race OD and SAE US dimensions on spindle for the hub? Id say 1inch or 1 1/16 inch spindle.
asked by: Leo
Expert Reply:
We have hubs that are designed to fit spindle diameters that you mentioned of 1 inch and 1-1/6 inch. If you have a straight spindle with a 1 inch diameter you'd have a BT8 spindle and the hub part # 8-258BTUC1 that you referenced would fit. If you have a spindle with a straight diameter of 1-1/6 inch then you'd have a BTR spindle and would want a # 8-258-50UC1. The diameter of the spindle where the seal would ride on either would be 1.25 inch.
If you can verify your spindle dimensions and they match either hub I mentioned then either would be a match.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Leaf Springs for Small Cox Boat Trailer
- Search Results: galvanized leaf springs
- Shop: BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles - 1-5/16" Diameter
- Q&A: U-Bolt Kit for Smaller Round Axle on Jet Ski Trailer
- Video: Feature Breakdown: CE Smith Carpeted Bunk Boards for Boat Trailers
- Video: Review of the CE Smith Bolster and Swivel Bracket Assembly
- Search Results: axle
- Search Results: leaf springs
- Search Results: leaf spring
- Search Results: bunks
- Search Results: keel rollers
- Search Results: akihub~440~2~g~1k
- Shop: CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Shop: CE Smith Replacement U-Bolt w/ Nuts for 1-3/4" Round Axles - 3/8" Diameter - Galvanized
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Shop: LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
- Video: Hands-On with the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles
- Q&A: Can a Three Leaf Spring Stack Be Used To Replace a Two Leaf Spring Stack
- Q&A: Replacement Slipper Springs for 1982 Cox Boat Trailer
- Q&A: Replacement Hub and Spindle for 2014 Ranger Trailer
- Video: Detailed Breakdown of the BTR E-Z Lube Spindle w/ Brake Flange for 2,500-lb Trailer Axles
- Q&A: What is Difference Between Trailer Bearings L44649 vs L44643
- Q&A: Can Bearings for a 1-1/16 Inch Spindle Replace Bearings for a 1 Inch Spindle Using Same Hub