SumoSpring Suspension Enhancement Recommendation for 1997 Fleetwood Bounder on F-53 Chassis

Question

Question:

Ihave a 1997 bounder rv 35ft gas want to upgrade supenion with SUMO is that possible

asked by: James

0

Expert Reply:

Your 1997 Fleetwood Bounder is built on a Ford F-53 chassis which we do have SumoSpring fits for. For the front axle you'd want the part # SSF-172-40-2 and then for the rear part # SSR-185-40-1 and you'd be set!

expert reply by: Jameson C

0

Answer 1

When comparing the ride quality between the Timbren #TFFF53B and SumoSpring #SSF-172-40-2 I recommend going with the SumoSprings. Although Timbren is a very solid product, the SumoSprings have been proven to have more of a forgiving support over the…

view full answer...

Answer 2

First, if your RV is sagging because the suspension is worn, you will need to have the suspension fixed before adding springs. Suspension enhancement systems are designed to be installed on a vehicle with suspension that is in good working order.…

view full answer...

Answer 3

For the front axle of your 2003 Gulfstream Sun Voyager Motorhome on a 2002 Ford F-53 chassis, you'd want to use the #SSF-172-40-2 SumoSprings.

view full answer...

Answer 4

We can get your 2021 Forest River Georgetown 36K7 set up for a smoother and more controlled ride, and the best way to do that is to add an aftermarket rear anti-sway bar because they are better constructed with higher-strength, thicker steel than OEM…

view full answer...

Answer 5

I prefer using SumoSprings Rebel Custom Helper Springs #SSF-172-40-2 for the front axle and SumoSprings Maxim Custom Helper Springs #SSR-181-54-1 for the rear of your 2000 National RV Tropi-Cal 6350 motorhome. You have a Ford F-53 chassis with a GVWR…

view full answer...

Answer 6

In order to replace just the factory anti-sway bar bushings on a Ford F-53 Chassis you have a few options which will be based on the location of the anti-sway bar (front/rear) and the gross vehicle weight rating of the coach (15,700 lbs, 16,000 lbs…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is indeed compatible with air bags when installed on your 2024 GMC Sierra 3500. This is the right bar for your stock height truck. I would stay away from the Air Lift air…

view full answer...

SumoSpring Suspension Enhancement Recommendation for 1997 Fleetwood Bounder on F-53 Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching