Where to Find Connector to Install Trailer Wiring for 2012 Ford Escape

Question

Question:

Where is the connection on my 2012 escape

asked by: Gary

0

Expert Reply:

If your 2012 Ford Escape had the factory tow package the correct trailer wiring harness would be the # 118251. The connection point is behind the rear bumper on the driver's side of the vehicle. I attached a picture I took from the install instructions for this kit for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I do have some great 2" to 1-1/4" trailer hitch reducers but none of them retract into itself. There are option that offer an extension like part #C45770 but these also reduce capacity. If you need the extra capacity then you'll want to…

view full answer...

Answer 2

The easiest way to determine if your 2010 Ford Escape has the factory tow package would be to contact the dealer with your VIN as they would be able to tell you exactly whether or not your vehicle has the factory tow package. Another option for you…

view full answer...

Answer 3

Hello Chris. For your 2012 Ford Escape I recommend the Curt Class 3 Hitch #13650. This hitch has a 2" receiver which is standard and will give you a ton of options for a bike rack. My personal favorite bike rack is the Kuat NV 2.0 #BA22B. This…

view full answer...

Answer 4

It is possible that the relays and fuses where not installed on your 2011 Ford Escape, even if it has the tow package. It is not uncommon for this to occur, but in order for the Draw-Tite Custom Fit Vehicle Wiring, #118251, to work, the tow package…

view full answer...

Answer 5

I looked at the picture that you sent and that connector does not look like what the #40455 plugs into. The connection point is located behind the bumper near the driver's side tail light. The connection location can be seen in the video of this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Hey Tim, The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT is compatible with LED lights and has been used as a go to for years for people who have LED trailer lights. The light function is supposed send a tiny bit of voltage from the…

view full answer...

Answer 12

Hey Curtis! Yes, the etrailer Trailer Hitch Receiver #e98845 comes with the fishwire/bolt leader. All of the hardware pictured below, including the fishwire, will come with the trailer hitch. This is confirmed to fit your 2018 Dodge Journey. Do you…

view full answer...

Where to Find Connector to Install Trailer Wiring for 2012 Ford Escape

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching