Choosing Replacement Fender for Tracker Marine Boat Trailer

Question:

I see that the F008583 might work on my trailer that has my 1996 Pro DV 17.6 Tracker. How do I measure it to be sure and what hardware do I need to mount the Fenders 2?

asked by: William P

Expert Reply:

The Fulton Single Axle Trailer Fender # F008583 referenced in your question may work well as a replacement on your 1996 Tracker Boat Trailer. This particular fender is designed for single axle trailers like yours that are equipped with 13 inch tires like what you have. Its overall dimensions are 9 inches wide, 40 inches long, and 12 inches tall. The front and rear mounting bracket slot is 4 inches long. I have attached an image with these and a few other dimensions labeled that you can take a look at. I simply recommend comparing these measurements to those on your existing fender to see if this will be a suitable replacement with your existing hardware.

If you aren't able to use your current hardware, your best bet is to simply obtain the needed parts from a local hardware store. Because trailers are so different the mounting methods differ as well so it's hard to say exactly what you will need.

I have attached a short video demonstration on this fender that you can also check out.

expert reply by: Chris R

click to enlarge

Kathy S.

5/1/2020

Need to replace the wooden fender back to my 2001 trackerstar trailer. Lost one and the other one carpet is shot. Do you have pre cut fender back preferably with carpet !