Recommended Hitch Size for a 1999 Jeep Grand Cherokee

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(249)

$209.04

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1340)

$13.64

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(106)

$37.26

Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs

(3721)

$34.24

etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel

(1289)

$42.01

Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span

(885)

$16.31

Question:

whats the correct size hitch for a 99 grand chereeke

asked by: brian j

Expert Reply:

Both 2 inch and 1-1/4 inch hitches are available for the 1999 Jeep Grand Cherokee, but I would recommend going with a hitch with the 2 inch opening. This would give you the most common hitch size, so you would have more choices available when it comes to hitch accessories.

The CURT 2 Inch Hitch # 13051 would be a good choice for your vehicle. You can view the installation instructions as well as a video of the hitch being installed on a 1999 Grand Cherokee at the provided links.

To wire the vehicle for towing, I would recommend wiring harness # C55369, which is custom-fit and will plug right into the existing connector on your vehicle. I am also including links to instructions and a video for the wiring for you to check out if needed.

If you plan on towing a trailer, you will also need a ball mount, a hitch ball, and a hitch pin or lock. My recommendations are listed below.

Ball Mount # D-4
Hitch Pin and Clip, # PC3
Hitch Ball # 19247
Hitch Lock # e98882

The # 2923 ball mount would place the hitch ball at the most common trailer height. To determine the rise or drop you would need on the ball mount for a particular trailer, I recommend taking a look at our ball mount FAQ at the provided link.