Front Mount Hitch Options for a Winch on a 2018 Ford F-150

Updated 07/09/2018 | Published 07/05/2018

Products Featured in This Question

Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

(207)

$233.92

Curt Trailer Hitch Electric Winch Mount Plate

(50)

$140.93

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

(187)

$236.12

ComeUp Battery Isolation Switch for DV and Seal Series Winches

(2)

$23.86

Question:

2018 F150 supercab STX XL w/STX PKG with FX4 pkg, 2.7 ecoboost which curt and drawtite hitch model numbers for a front end hitch will fit? 2 inch receiver. Purpose is to use a winch on the front. I would like to have the most ground clearance. What is the dimension from the bottom of the frame to the bottom of the receiver on each brand? thanks,

asked by: Randy D

Helpful Expert Reply:

The front mount hitch receivers from Curt and Draw-Tite that fit your 2018 Ford F-150 are parts # C31083 and # 65067 respectively. Both of these are rated for 9,000 lbs line pull and 500 lbs vertical load.

From the 2 bolts holes on the Curt to the top of the receiver tube measures just under 7-1/2" while that same distance on the Draw-Tite is closer to 7". The Draw-Tite will give you more ground clearance but not by much. Instructions for both receivers have been linked for you to reference.

If you don't already have a winch then I recommend the ComeUp Seal Gen2 Integrated Off-Road Winch # CU295885. This comes with a wireless remote, synthetic rope, a hawse fairlead, and is rated for 9.5K so you can get the max out of your front hitch receiver. You can mount this on your F-150 using the Curt # C31010 mounting plate. To add handles on this plate use part # C31005 to make removal much easier.

You may also be interested in the ComeUp Battery Isolation Switch # CU881097 to disable the winch for when you will be away from your pickup for extended periods of time.