Noco Genius Gen 3 10amps x 3 tank Wire Extension

Updated 04/18/2018 | Published 04/16/2018

Products Featured in This Question

Eyelet Cable with X-Connect Adapter for NOCO Boost Jump Starters - 18-1/2" Long

(7)

$24.95

16 Gauge Primary Wire - Black - Per Foot

(61)

$1.14

Deka Ring Terminal - Heat Shrink - 16-14 Gauge - 1/4" Ring ID - Nylon Insulation - Blue - Qty 1

(38)

$2.29

Question:

Noco genius gen 3 10amps x 3 tank. I just purchased for my boat. I need one bank longer. Looking at the wires how would I use the 10ft extender as there are just the eyelets on the end of all three banks. There is no way to put an adapter on without cutting the eyelets off and placing in an adapter? Only the red wire goes thru the fuse.

asked by: Danny S

Expert Reply:

The NOCO Genius Gen3 already has the fuse on each line and they don't have the extensions available for this model. You can extend the wires, but if you alter your wiring, you will void your warranty. You only need to extend the wires and put the ring terminals on either end to give yourself a working solution. I recommend using wiring # 16-1-1, and ring terminals # DW05737-1. You will simply use a bolt and nut to connect the two wires...but make sure the negative and positive wires never come in contact with each other.

The 8 gauge wire on the # 329-GBC007 will not work for your application. The wires will be too thick and the fuse won't be helpful.

expert reply by: Jason S