Locating Factory Brake Controller Plug on 2015 Ford F-150

Products Featured in This Question

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers

(872)

$18.50

Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional

(6365)

$146.94

Question:

first of all thanks for the quick answer...yes i found it right where you said it was ... second this time ill spell truck right instead of trugs ...... ok heres my other question ,,,everywhere i look it says when i buy a brake controller i have to have it taken to a ford dealer and have it flashed ??????? what do you have on this ??? and thanks again

asked by: Ken

Helpful Expert Reply:

There should be a factory brake controller plug on your 2015 Ford F-150, whether it came with a 4-Way or 7-Way connector at the back of the truck. The plug will be located beneath the dash inside your cab. You may need to remove some shroud around the steering wheel compartment to access the plug. I have attached an installation video on the 2016 Ford F-150 that you can take a look at. The process should be very similar for your 2015 model.

The correct plug-in adapter for your Ford F-150 is the part # 22292. One end will plug into the brake controller itself and the other end will connect to the built-in port on your truck. For the brake controller itself, I highly recommend the Tekonsha Prodigy P3 # 90195. This is an excellent, proportional controller that will activate the brakes on your trailer at the same time and with the same intensity that you apply to them in your truck. It features an easy to read digital display along with continuous diagnostics that will alert you to any potential issues.

I have included the written installation and operating instructions for this controller that you can also check out.

expert reply by: Chris R

Ken

12/22/2017

Chris R.

12/22/2017

I'm glad you were able to find the factory plug on your Ford F-150! During and after installation of an aftermarket brake controller like the Tekonsha Prodigy P3 # 90195 that I referenced, you will not need to bring your 2016 F-150 to the dealer to have the computer flashed. This is the case with certain model trucks that feature an integrated brake controller, but not for your particular truck. You will just need to use the Plug-In Adapter Harness # 22292 to install the controller and you will be good to go.

Tony

2/3/2020

I have a 2015 F-150 xlt I bought aftermarket brake controller with the plug in harness, I went to install but there was no plug in for it. I thought it was behind the little box where the factory controller goes. I have a plug under the steering wheel is that looks like it but something is already plug in ? . Any suggestions. Tony

Jacob H.

2/5/2020

We have an installation video that will be very similar to what you have on your truck. The factory harness should be connected to the pocket that is on your dash to the right of the steering wheel. In the video the installer will show the removal of this plug at 3:45 in the video.

Helpful Links

tv-install-curt-venturer-brake-controller-2013-ford-f150-c51110.aspx