Difference Between Curt Fifth Wheel Rails C16104 and C16204

Question

Question:

What is the difference between rails C16104 and C16204?

asked by: Karl

1

Helpful Expert Reply:

The difference is the finish on the rails. The part # C16104 is a gloss finish whereas the part # C16204 is a matte black finish.

expert reply by: Jameson C

1

Answer 1

Curt has a fifth wheel bracket kit that fits your 2020 Chevy Silverado 2500HD without OEM rail kit with the part #C16429 or for a kit with rails part #C16429-204.

view full answer...

Answer 2

Yes, the Curt Rail Kit part #C16443-204 that you referenced has the industry standard rail dimensions so a Reese Slider like the part #RP30075 would fit and work well in this rail kit.

view full answer...

Answer 3

The 023-106-00 brake you have pictured is going to be the Dexter 12 Inch Right Hand #23-106. As it is best to do both sides when replacing brakes, I suggest going with #23-105-106. This replaces both the driver and passenger sides and will be direct…

view full answer...

Answer 4

I was unable to find any information with the numbers on your axle, unfortunately. However, you can contact the manufacturer of the trailer and they should be able to tell you exactly which inner and outer bearings you have. If for some reason they…

view full answer...

Answer 5

Since you mentioned the cotter pins which are used to secure the feet inside the rails, that makes me that you are referring to the connection point between the rail and foot on one of the four corners of the Curt A20 5th Wheel Trailer Hitch part…

view full answer...

Answer 6

For a 2019 Ford F-350 I recommend the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #RP50074-58 or just the bracket kit #RP50074. The custom brackets will allow you to mount the 5th wheel rails easily and…

view full answer...

Answer 7

Yes, the Curt A25 5th Wheel Trailer Hitch #C16180 will sit in the center of the rails. If you take a look at the diagram I've added you can see where you would need to install the Curt Brackets and Base Rails #C16448-204 on your 2008 Ford F-250…

view full answer...

Answer 8

Yes, the Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails part #16055 can be installed where the offset is closest to the cab or where the offset is closest to the tailgate. In order to reduce rattling, I strongly recommend using the…

view full answer...

Answer 9

Yes, the Curt Safety-Chain Loops for Gooseneck Hitches on 5th Wheel Rails #C16000 that you referenced is sold in pairs so the price is for a quantity of 2. Basically everything you see in the attached picture. The same goes for the #RP50223.

view full answer...

Answer 10

If you're looking for a budget fifth wheel and gooseneck hitch setup for a 2003 Ford F-250 I recommend the Reese 5th Wheel Trailer Hitch part #RP30051 which is one of the most effective dual jaw hitches. The dual jaws will provide a much smoother…

view full answer...

Answer 11

There are a couple of options to hook up the chains on the Andersen Ultimate Safety Chain Kit item #RM3230. If you do not have a set of rails you'll want to use the Gooseneck Anchor Plate item #C65NR. This installs below your gooseneck ball. If…

view full answer...

Answer 12

We have only seen gooseneck hitch balls that are 2-5/16" and 3". If you're looking for a Curt fifth wheel to gooseneck adapter like the Curt #16085 that has a 3" ball we have part #16055. Included is the review video for reference.…

view full answer...

Difference Between Curt Fifth Wheel Rails C16104 and C16204

Product Page this Question was Asked From

Continue Researching