Does Curt Hitch 13432 Fit 2017 Jeep Wrangler Smoky Mountain Edition

Question

Question:

I just purchased a 2017 Jeep Wrangler Smoky Mountain Edition. Will this fit? If not can you provide me with the correct part numbers including the part number for the correct wiring harness. Thanks,

asked by: Mike F

0

Expert Reply:

Yes, the Curt hitch part # 13432 is a confirmed fit for your 2017 Jeep Wrangler Smoky Mountain Edition as I looked up pictures of your Jeep and it uses the standard bumper which this hitch is compatible with.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Rick, yes the EcoHitch Stealth hitch part #EH57CR that you referenced does fit your 2024 Subaru Crosstrek Wilderness edition. This is a really great option to carry a bike rack. There's no trimming of the bumper required nor does the exhaust…

view full answer...

Answer 8

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

view full answer...

Answer 11

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

view full answer...

Answer 12

Hey Lisa, with the Seaflo Battery Disconnect Switch part #SE29VR you'd only need one for a bank of two batteries like what you can see in the attached picture.

view full answer...

Does Curt Hitch 13432 Fit 2017 Jeep Wrangler Smoky Mountain Edition

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching