What Adhesive Is Used For Valterra RV Waste Valves
Question:
Do you have to glue the no clamp side of the valve ? If so, first cut off the existing clamp, clean and glue. If glued, what do you recommend
asked by: Rick R
Expert Reply:
The waste valve you came from, part # T58 is not a valve that uses glue because it is designed to attach to the RV side and the waste tube with the bayonet adapters on each side of the valve. We do have waste valves that do require gluing. I have attached a link to the waste valves we offer. You can use the filter on the page to find the correct size you need.
We do offer part # T50. This has a cap with a bayonet fitting that you attach your drain hose to. The other side of the valve is glued.
For the glue you can use the Valterra ABS Solvent Cement, part # A05-0303.
Mike M.
5/13/2024
I have the bayonet style mount, but was wondering if it is acceptable to use a little of the ABS solvent during installation to make it permanent?
Products Referenced in This Question
Valterra ABS Solvent Cement - 1/4 Pint
- RV Sewer Hose Fittings
- Sewer Seals and Gaskets
- ABS Cement
- Valterra
more information >
Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 3 Inch Hub
- Stationary Valve
- Valterra
more information >
Product Page this Question was Asked From
Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug
- RV Waste Valves
- Straight Valve
- Single Waste Valve - Manual
- 3 Inch Hub
- Stationary Valve
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug
- Shop: Valterra ABS Solvent Cement - 1/4 Pint
- Shop: Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug
- Search Results: morryde x~factor
- Video: Feature Review Valterra Bladex Waste Valve for RV Black Water Tank
- Shop: MORryde X-Factor Dropdown Crossmember for Stock Leaf Spring Suspension
- Shop: Valterra Clearview Adapter for RV Sewer Hose - 3" Bayonet and Lug Fittings - 45-Degree - Clear
- Shop: Valterra Hydroflush Reverse Flush Adapter for RV Holding Tanks and Sewer Hoses - 45-Degree
- Shop: Valterra Adapter for RV Sewer Hose - 3" Bayonet Fitting - 45 Degree - Black
- Video: iN-Command TPMS Sensor Pairing Manufacturer Demo
- Q&A: Replacement Bronze Bushings for MoRryde CRE3000 Suspension System
- Search Results: dometic toilet seal
- Search Results: valterra t58
- Shop: Vehicle Lights
- Q&A: Interior and Exterior High-Efficiency LED Lights for 2004 Keystone Cougar 5th Wheel
- Search Results: backup camera
- Video: What to Know About the Double RV Waste Valves-T80
- Video: Detailed Breakdown of the Voyager RV Backup Camera w/ Night Vision
- Q&A: How To Remove An Old Waste Valve Flange Fitting To Install A New Waste Valve
- Q&A: Can Valterra Waste Valve be Mounted in Side Position?
- Search Results: rhino flex
- Video: Checking Out the LaSalle Bristol Coupling for RV Sewer System
- Shop: RV Roof Membrane
- Search Results: black water tank fittings
- Search Results: rv parts
- Video: The Low-Down on the Valterra Waste Valve for RV Black Water Tank
- Video: All About the Valterra Waste Valve for RV Black Water Tank
- Q&A: Sewer Drain Valve and Hose Needed for Current Drain System
- Q&A: T-58 Waste Valve With Bayonet Connection
- Q&A: Adapter Recommendation for Connecting to Bayonet Fittings of Valterra Waste Valve T50
Jack A.
6/6/2020
Just came back from camping and the black water valve was seeping and would not seal. Dealer said $450.00 and needed camper for a month to fix. During summer! Looking for a new cap with seal and found this bayonet valve that fit on end of drain and solved problem till this fall. It works so well and moves the fitting further out so I don not need to get on my knees to hook up the hose. I may fit this with glue weld and leave it.