bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about RV Waste Valves


  • Parts Needed to Drain Gray Water Tank From Valterra T1001C
  • In order to drain your gray water tank with the Valterra # T1001C, which has a 1-1/2" MPT end threads onto sewer system pipe, you'll want to use the Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT # T01-0091VP. This will connect to the # T1001C and allow you to connect a garden hose that will allow you to drain your gray water tank. There is not a specific hose designed for this use and the gray water tank will either be drained in this manner, dumped straight...
    view full answer...

  • Replacing Both 3” RV Black Water and Gray Water Valves Each With 72” Cables
  • The valves you are seeking to replace are made by many different manufacturers and are a standard size. The function of the valve is what you want to pay attention to as there are T-handle and cable options and then of course black water versus gray water as well as different diameters for those gray water applications. For your 3 inch valve, the LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 72" Cable # 34466N4BB72GM will work well for you and...
    view full answer...

  • Is There a Specific Length of Cable Needed For Spigot to Hub Black Water Valve
  • There actually isn't any way for us to know what length of cable you need when replacing the black water valve on your 2018 Montana Legacy 3130RE so you would need to either take some measurements or make an educated guess. The good news is there are plenty of options for length: - LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 36" Cable # 34466N4AB36GM - 48" Cable # 34466N4AB48GMA - 72" Cable # 34466N4AB72GMA - 96" Cable # 34466N4AB96GMA - 120"...
    view full answer...

  • Recommended Replacement RV Waste Valves And Trailer Door Latch
  • Thank you for the pictures! Based on the pictures you provided of your broken RV Sewer Valve I recommend the Double RV Waste Valves # T68C which has the same heel inlet as your broken valve. You will also need Valterra ABS Solvent Cement # A05-0303 to secure the new Waste Valves to prevent leaking. For a replacement trailer door latch we offer a 6" hook or 10" hook option. I recommend measuring the distance between the door latch and the latch on the trailer to see the shortest...
    view full answer...

  • Measurements of Valterra Waste Valves
  • For the Valterra # TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra # TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have attached dimensional drawings to illustrate this and provide some additional measurements.
    view full answer...

  • Can Cable on LaSalle Bristol Cable-Actuated RV Waste Valve be Shortened
  • You can definitely cut and reattach the handle on the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB96GMA, but since this has a 96" cable and you just need 24" I recommend going with part # 34466N11AB36GM instead which is the exact same part just with a 36" cable.
    view full answer...

  • Adding a Blade Valve to the end of my Tanks Dump Plumbing
  • While there isn't an adapter to go directly between the Valterra Waste Valve for RV Black Water Tank part # T50A can be added on in place of your current 3" lug cap in place now. Simply cut it off and attach this one using the LaSalle Bristol ABS Solvent Cement part # 3447530889. This will give you the valve in place to keep the stuff off of your hands. The Valterra Bladex Waste Valve Body for RV Black Water Tank part # T1003VPM you looked at can be used to replace the existing valves...
    view full answer...

  • Whats the Difference between Waste Valves # 34466ND14BBR and # 34466ND14AAR ?
  • The LaSalle Bristol # 34466ND14AAR Waste Valve is the female version where the black water inlet is 3-1/2" INSIDE diameter, whereas the # 3446ND14BBR has a 3-1/2" OUTSIDE diameter. I have attached a photo with dimensions of the female version. If you are replacing this waste valve you will probably want to cement on a LaSalle Bristol # 34466V293B3 Termination Adapter which has the prongs for a sewer hose with bayonet connection fittings to attach to. The EZ Coupler # D04-0113 ten...
    view full answer...

  • Is There a Black Water Tank Waste Valve Body
  • The waste valve bodies alone without a hub or spigot connection are something you can get. You would need something like the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" # TC1372 for both tanks or the Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" # TC372 for the black water tank only. There is also the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240 which does not have...
    view full answer...

  • Recommended Tools For Removing Tight Sewer Drain Cap From Valterra RV Waste Valve
  • To remove the 3" cap on your Valterra Sewer Drain like # T30A I recommend using the FloTool GRIPTECH 3-Position Adjustable Pliers # FT10627GT which can be adjusted between 2-3/4" and 4" to give you extra leverage in removing the cap. For making sure the gate valve does not come loose you can simply hold the pipe with your other hand to keep the assembly from rotating or you can use another set of the # FT10627GT to hold the pipe right behind the cap which will allow you to remove the...
    view full answer...

  • What Is The Difference Between A Spigot And A Hub?
  • The difference between the Valterra RV Waste Valve # T60, and the Valterra RV Waste Valve # T60A, is that # T60 is a 3" Hub, and # T60A is a 3" Spigot. The difference between a spigot and a hub, is that a spigot is something that is to be assembled into another fitting and the common female connection of PVC fittings is referred to as the socket or hub. The spigot end of a fitting can be inserted into a Hub or Socket.
    view full answer...

  • Replacement 3 inch and 1.5 inch Valve for Winnebago Spyder
  • The Bristol RV Waste Valve # 34466N3AR will fit the setup you sent in a picture of. Only thing else you'll need is ABS Solvent part # 3447530889 and you'd be set. We do ship to Canada.
    view full answer...

  • Will Shorter Cable Length for RV Waste Valve Make Operation Smoother
  • The straighter and shorter you can make the dump cables they smoother they will operate to a certain extent. So if you can get away with the shorter 36 inch long cable version part # 34466N4AB36GM instead of the # 34466N11AB72GMA that you referenced this would work well.
    view full answer...

  • Replacement Dual Waste Valve for Coachman Freedom Express
  • Dual waste valves, such as the Valterra # TR38A, are nearly generic by nature. This one has the standard 1-1/2" gray water gate and standard 3" gate, and has a "Y" shape. You should also look at the Bristol # 34466ND13AAR Double Waste Valve that has more of a "T" shape, or the Valterra # T38. Compare what you have on your Freedom Express to these and one should be a match. Many of these connections will have been factory installed with solvent cement an will have to be cut off. Be...
    view full answer...

  • Repairing Leaky Valterra TC1372 Waste Valve Bodies on RV Black and Gray Water Sewer Outlet
  • According to Valterrra, if your # TC1372 waste valves are fully closing, but are still leaking you'll want to replace the seals. You'll need both the 3 inch seal kit, part # T1003-9VP and the 1-1/2 inch seal kit, part # T1001-9VP
    view full answer...

  • Recommended Adapter To Use 3" Valterra EZ Valve Electric Waste Valve On 1-1/2" Gray Water Tank
  • Absolutely! To install the Valterra EZ Valve Electric Waste Valve # E40A-8 on your gray water tank with 1-1/2" pipe you can simply use the Valterra Eccentric Tank Reducer 3" Spigot to 1-1/2" Hub # T1041-1 on each side of the waste valve to convert the 3" openings to 1-1/2". The Valterra EZ Valve # E40A-8 includes a gray water switch plate for you to use as well. You will also need Valterra ABS Solvent Cement # A05-0303 for a strong leak free connection.
    view full answer...

  • Replacing The Double RV Waste Valve On Your RV Or Camper
  • When installing the # 34466NDHR19AAA you can use a nipple like # T3524 and connect it to your the waste valve with some ABS cement # A05-0303 and then a # F02-2103 coupler onto the tank pipe.
    view full answer...

  • Can Valterra Replacement Cable be Used with Lasalle Bristol RV Waste Valve
  • I don't see why a replacement Valterra Cable like part # TC72PB wouldn't work as a replacement for your Lasalle Bristol valve but officially it hasn't been tested so we can't say with total certainty. We've asked Valterra this in the past and this is what they told us.
    view full answer...

  • Replacement Valves For The Bristol Double RV Waste Valves Part # 34466ND14AAR
  • Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # 34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/ Coupler, Seals, and Hardware - 1-1/2" Diameter # 34439241 and the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240.
    view full answer...

  • Can ABS Solvent Be Used to Repair RV Waste Valve that Broke at the ABS Cement
  • ABS solvent most likely would be all you'd need since it looks like you got lucky and didn't break the valve or pipe components. For that we have the part # A05-0303.
    view full answer...

  • Replacing the Blackwater Waste Valve and Cable on a 2018 Heartland RV Bighorn Fifth Wheel
  • If you're looking to replace your blackwater waste valve and cable, then I recommend going with an actuated cable valve. For these, LaSalle Bristol offers two options while Valterra offers none. Which of the two Bristols you choose will depend on your current setup. The first, part # 34466N4BB72GM, has a 72" cable and a spigot to spigot connection. The second, part # 34466N4AB36GM, has a 36" cable and a spigot to hub connection. You will need to review your setup to find which connection...
    view full answer...

  • Direct Replacement For A Bristol Double Hub V93B15
  • Product # 34466ND13AAR is a hub, a hub or a socket is the common female connection to PVC fittings. While # 34466ND13BAR is a spigot, which is the end connection to a fitting that has to be assembled into another fitting; the spigot fitting has the same outside diameter as pipe. The spigot fitting can be inserted into a hub or socket. The Double RV Waste Valves # T80 is a direct bolt on for your Bristol Double Hub V93B15.
    view full answer...

  • Black & Grey Tank Valve Recommendations
  • It can certainly be frustrating when the valves don't open and close correctly. Both Valterra and Bristol make excellent products, but even if the diameter sizes are the same, they aren't completely interchangeable. It is best to stick with the original equipment, in your case being Lasalle Bristol. You are correct that the square flanges and bolt fittings will be the same as your original valve cartridges. For the 1.5" ones you need I recommend the # 34466N11AB96GMA and for the 3"...
    view full answer...

  • What is Difference Between Double Waste Valves # TR38, # TR38A, and # TR38B
  • The difference between the part numbers you mentioned of # TR38, # TR38A and # TR38B comes down to the difference between spigots and hubs in terms of how these valves install. So hubs fit OVER a pipe and spigots fit INTO a pipe. So the part # TR38A has a 3 inch spigot and a 1-1/2 inch hub # TR38 has a hub for both fitting sizes # TR38B has a 3 inch spigot and a 1-1/2 inch hub.
    view full answer...

  • Extension For RV Waste Valve Shorter than 10 Inches
  • Yes, we have the part # T1021 which is 5 inches long instead of the # T1022BK which is 10.
    view full answer...

  • Replacement Cable & Handle for LaSalle Bristol Waste Valve
  • I reached out to my contact at LaSalle Bristol regarding the LaSalle Bristol # 34466N4BB72GM waste valve that you referenced and they said that they do not have just a replacement cable for that item. However, I think that you could use the Valterra # TC72PB cable for this.
    view full answer...

  • How Do Fittings of Bristol Double RV Waste Valve # 34466NDHR19AAA Attach to RV
  • The Bristol Double RV Waste Valve # 34466NDHR19AAA that you referenced does not have bayonet fittings for hoses to attach to like you are asking about. All of the fittings are designed to fit over sewer hose and permanently install with solvent like # 3447530889.
    view full answer...

  • Rebuild Kit Bristol 1-1/2 Gate Valve
  • We have several replacement valve options for RV gray water, 1-1/2" all in black, such as the Bristol Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Hub to Spigot Item # 34466N11AB or the # 34466N11AB72GMA with a 72" cable. So although do not have a rebuild kit for a Bristol valve in white we do have replacement options. There is also a number of very cost effect replacements in the option of double valves, please note the attached link.
    view full answer...

  • Recommended Waste Valve And Drain Hose Attachments For A Grey Water Tank
  • For draining your grey tank I recommend using the Valterra Waste Valve for RV Gray Water Tank w/ Cap # T1001D with some Valterra ABS Solvent Cement # A05-0303 to secure it to the pipe. Then you can screw on the Valterra Gray Water Drain Connector # T01-0094VP and screw on a hose like the Valterra Flushing Hose for RV Sewer System # W01-4300.
    view full answer...

  • Rubber Grommet Connector Between Black Water Tanks and Waste Valve.
  • This is an unexpected configutation with the valve connected directly to the black tank. Nevertheless, it seems that a Valtera # F02-2106 Replacement Rubber Grommet would fix you right up. I think I would spring for some new Valterra # H03-0018 hose clamps. If you find that you have 3-1/2" connections (rather than 3") then the Valterra # F02-2103 coupler will be needed. Otherwise you will be ready for the Valterra # T18A waste valve.
    view full answer...

  • Replacement 1-1/2" and 3" Valterra Bladex RV Waste Valves With Threaded Shafts
  • Yes, if you were to remove the hub and spigot from the Valterra Bladex Waste Valve # T40NH you would be left with a Valterra Bladex Waste Valve Body # T1003DSPB with the threaded shaft rather than a drilled shaft. A better option may be to use the Valterra Bladex Waste Valve Body # T1003VP and just remove the handle that is threaded on. That will take care of the 3" valve you are needing. We have the 1-1/2" valve with the spigot and hub # T1001NH or like the other option I recommended...
    view full answer...

  • Does Valterra EZ Valve Double Electric Waste Valves Need to Install Near Both Pipes
  • Thanks for the photos, and you will need to install the Valterra EZ Valve Double Electric Waste Valves - Rotating - (3) 3" Hubs # E85-8 further up. The valves need to connect to your gray and black water tank and then to the down pipe; to secure the EZ Valve to your pipes you will also need the Valterra ABS Solvent Cement # A05-0303. I have added a link below to the installation instructions for you to check out as well of the Valterra EZ Valve Double Electric Waste Valves # E85-8.
    view full answer...

  • What is Difference Between Valterra RV Waste Valves T80 and T81
  • The difference is the connection the two valves make after the valves come together. The part # T81 uses a spigot connection for a permanent install and the # T80 uses a bayonet style fitting which allows for easier connection and disconnection.
    view full answer...

  • Inside And Outside Diameter Of The Bristol Double RV Waste Valves Hubs
  • The inside diameter of the Bristol Double RV Waste Valves # 34466NDHR19AAA is 3-1/2" and the outside is 4". Since these are hubs they'll slide over your 3" ID (3.5" OD) waste pipe.
    view full answer...

  • 3 Inch Waste Valve for Black Water Tank That Allows use of Cable
  • We do have a 3 inch waste valve for a black water tank that allows you to use a cable; the Valterra valve we offer has a drilled stem that allows you to attach your cable. What you are looking for is the following: - Valterra Bladex Waste Valve Body for RV Black Water Tank with Drilled Stem - 3" Diameter # T1003DSPB I have added a link below to a video review for you to check out as well if you'd like.
    view full answer...

  • Replacement Gray Water Valve for Valterra System with 2 Inch Diameter Pipe
  • We have some options for you. I've got the 2 inch fit you are seeking. I recommend taking a look at the following options to determine the correct fit for your trailer since I don't know what you are connecting to. Valterra Bladex Waste Valve Body for RV Holding Tank - Aluminum Handle - 2" Diameter # T1002VPM Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Hub to Hub # T1002B Valterra Bladex Waste Valve for RV Holding Tank - 2" Diameter - Spigot to Spigot # T1002A Valterra...
    view full answer...

  • Troubleshooting Leaking Black Water Fitting on 1969 Forester
  • The damaged outlet hole will require replacing. I believe you will need to drop the tank to see what is really wrong with the fitting to cause the leak. Then you will use the Valterra ABS Solvent Cement - 1/4 Pint # A05-0303 and I believe the LaSalle Bristol RV Sewer Slip Hub with Flange - 3" # 34466V13 to replace the broken fitting.
    view full answer...

  • Side to Side Length of the Double Rv Waste Valve Part # T85NH
  • The length of the Double RV Waste Valves part # T85NH is 12". I was able to have one pulled to confirm this for you.
    view full answer...

  • Depth of Valterra Waste Valve for RV Black Water Tank T50A
  • The depth of the Valterra Waste Valve for RV Black Water Tank part # T50A measures 4-1/4" end to end without the cap but please note the fittings don't butt up to the end on either side.
    view full answer...

  • Recommended Replacement Sewer Valves for a Motorhome
  • I have some great options to replace the sewer valves on a motorhome. The best one really depends on what exactly you have now. If they are combined or you want to combine them I recommend the Bristol Double RV Waste Valves part # 34466ND13AAR. If they are separate and you want to keep them that way then I recommend the Bristol Waste Valve part # 34466N11AB for the grey water and part # 34466N4BB for the black. I'm sure you'll need some various elbows and pipe etc. but that really comes...
    view full answer...

  • Recommended Holding Tank Sensor Monitor For An RV
  • It definitely is a guessing game when it comes to filling your holding tanks. For a much more accurate reading of the water level in your black tank, as well as your fresh and gray, you can install the SeeLeveL RV Holding Tank Monitor # SE44VR. These strips simply stick onto the outside of of your holding tanks and have sensors every inch instead of just the old 1/3, 2/3, 3/3 type sensors that manufacturers install in their RV's. Because there's more sensors on these strips the reading...
    view full answer...

  • Replacement Waste Valves Needed for 1989 Monitor Camper
  • We have a wide selection of valves, many of which are the same as used by the OEM's. While I do not have the abilty to pull build sheets and the know the part number used by the OEM I am certain we can locate something that will work. If you are looking for valves that fit between the lines on your camper and the item shown in the attached image, please look at the Valterra Waste Valve 1-1/2" Diameter, # T1001B and the 3" Hub to 3" Hub, # T40B. If this does not fit what is needed,, please...
    view full answer...

  • Orientation of Valterra EZ Valve Double Electric Waste Valves for Install
  • The Valterra EZ Valve Double Electric Waste Valves # E85-8 is essentially a manual system with an electrical function that moves the manual waste valve handle. This means that you basically just have to install it so that the handles won't make contact with anything under your RV. If you check out the attached installation instructions you can see the section about the valve installation. To complete you're installation you'll also need the solvent # A05-0303.
    view full answer...

  • How Much Clearance Is Needed for the Valterra EZ Valve Double Electric Waste Valves
  • The Valterra EZ Valve Double Electric Waste Valves part # E84-8 can really be made to work on any trailer with some slight modifications. The valves can be reconfigured to orient in any direction and the main outlet can be rotated. Unfortunately, the manufacturer does not provide us with any detailed dimensional drawings but we've gathered some. The overall length is 12" but the main thing you need to account for is the height which is 11-1/2" with the valve closed and 15-1/4" while...
    view full answer...

  • Replacing Valterra Valve with LaSalle Bristol Cable-Actuated RV Waste Valve
  • What I think you are asking is if you can replace within a current system, a valve assembly of one manufacturer with that of another. Yes, the fitment of valve assemblies is industry standard in dimensions. A Valterra 3" can be replaced with a LaSalle Bristol such as the # 34466N4AB72GMA. If you are asking about interchanging individual components within the assembly, we cannot guarantee fitment within that exchange.
    view full answer...

  • Is There a Replacement 48" Cable for LaSalle Bristol Waste Valve
  • I checked with LaSalle Bristol and they don't offer just the replacement cable. If the cable is broke you will need to replace the entire waste valve for which we offer part # 34466N4AB48GMA for black water or part # 34466N11AB48GMA for gray water. If you don't want to mess with fitting new pipes you can just un-bolt the valve from the flange and slide the new one in once the old is out.
    view full answer...

  • What is the measurement from end to end? Left to right?
  • The Bristol Double RV Waste Valves, # 34466NDHR19AAA has an overall measurement of 11-7/8" from edge to edge with a 9" measurement between the outer edge of each waste gate.
    view full answer...

  • Replacement Double Waste Valve
  • To replace your current double waste valve you'll just need the Double RV Waste Valves - Heel Inlet - Rotating - 3" Hub and 1-1/2" Hub # T68 and some Valterra ABS Solvent Cement - 1/4 Pint # A05-0303 for a secure connection.
    view full answer...

  • T-58 Waste Valve With Bayonet Connection
  • The Valterra Waste Valve for RV Black Water Tank , # T58 has a bayonet style connection. It will lock in to place from the four bayonet connections on one end and 3" Lugs on the other. Please see the attached image. If you are looking for something that accepts standard 3" plumbing pipe, the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug, # T50 is available. This requires an ABS solvent for installation. Please note the attached product review video.
    view full answer...

  • Overall Width of the Bristol Double RV Waste Valves
  • The Bristol Double RV Waste Valves, # 34466NDHR19AAA has an overall measurement of 11-7/8" from edge to edge with a 9" measurement between the outer edge of each waste gate.
    view full answer...

  • Measurement Valterra Waste Valve for RV Black Water Tank
  • The Valterra Waste Valve for RV Black Water Tank, # T50A has a 3" inner diameter measurement with a 3-1/2" measurement for the outside.
    view full answer...

  • Can I Replace individual Drail Valves Or Must I Replace The Entire Valterra T84 Unit?
  • On your 2010 Winnebago Vista 30W, if it has the Valterra Double Rotating Waste Valve - 3" Hub x 3" Hub x 3" Bayonet Cap # T84, # T85 or # T85B, then you can replace the individual valves. For the valves, you will want the Valterra RV Waste Valve - 3" Hub x 3" Hub # T40B and you will use the already existing tube connections and utilize the inner assembly.
    view full answer...

  • Can You Reuse The Same Cable When Replacing A Waste Valve
  • Yes, the cable of your old waste valve can be used with your new Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank - 72" # TC172. The cable simply gets pushed into the valve body and tightened down with an Allen key (pictured below).
    view full answer...

  • Installation of LaSalle Bristol 34466N4AB36GM Cable Actuated RV Waste Valve On RV
  • If the current valve you're using can be disassembled so that the flanges can be removed from the valve body, you'll have a pretty easy install. Remove the 4 bolts holding the existing flanges to he valve body you're wanting to replace then slide out the valve body. Remove the flanges from the new valve and slide in the new valve. Then bolt hole spacing is an industry standard, so as long as the old valve has the 4 bolts that allow you to remove the flanges, you should be good to go. If...
    view full answer...

  • Upgrading To Electronically Controlled Waste Valves
  • If you're wanting to have an electronically controlled valve for just the gray tank then you can use the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Hub to 3" Hub # E40B-8 along with a reducer # T1041-1 to make the connection between the valve and gray water pipe. There currently are no electronically controlled valves with a 1-1/2" opening so you'll have to use a black water tank valve to accomplish this. You could also use the Valterra EZ Valve Double Electric...
    view full answer...

  • Angle of Cables of Valterra Waste Valve Bodies w/ Flexible Cables
  • I believe I understand what you are asking and while the handle of the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" # TC1372 can be pointed down, and it is capable of a 90 degree angle, the cable needs to have a minimum of 6" of straight cable exiting the valve and handle, as you can see by the cut out of the instructions I added for you.
    view full answer...

  • Replacement Sewer Wye for Bristol V33B2R on Cobra Salem RV
  • I looked up the Bristol V33B2R and the correct replacement is the Bristol RV Waste Valve - Sewer Wye - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466N3AR which has the hub style fittings for the 3 inch and the 1.5 inch sections which slips OVER the line it attaches to.
    view full answer...

  • How Do RV Sewer Valves Attach to RV Sewer Lines
  • RV sewer valves like the Bristol part # 34466NDHR19AAA that you referenced install with ABS solvent like part # 3447530889.
    view full answer...

  • Can The Valterra Double Waste Valve Hub Replace Current Valves On A 2010 Coachmen Freedom Trailer
  • Yes, you could just simply swap out to the Double RV Waste Valves - Sewer Wye - 3" Fixed Hub and 1-1/2" Rotating Hub # T38. You will probably find it is put together with some ABS solvent cement # A05-0303 which will require you to cut the old pipes. I recommend keeping the cut as close to the valve connection as possible and then you won't have to add on additional pipes to add length.
    view full answer...

  • How to Know When Blank Tank is Full When Using Flush King Reverse Flush Valve
  • Thank you for the photo, and there should be sensors with a monitor for your tank that tells you how full it is in order to use the Flush Valve for RV Holding Tanks and Sewer Hoses # F02-4350. If you don't have that, you can still use the Flush Valve # F02-4350 but you'll want to be sure to limit the water flow going in so you don't have a real mess. But really, this is best used with black water tanks that have monitors which tell you how full it is. This will work for you unless...
    view full answer...

  • Lenght of Pipe on Valterra Double RV Waste Valve # T38C
  • I went out to the warehouse to take a measurement of the 3" diameter pipe on the Double RV Waste Valves # T38C and found that without the cap it measured 5" in length, as you can see in the accompanying photo I've added for you. I have also attached a link to a video review of this product for you to check out.
    view full answer...

  • How Do You Connect The Valterra Double RV Waste Valves # TR38 To The Gray And Black Water Pipes
  • The Double RV Waste Valves - Sewer Wye - Rotating - 3" Hub and 1-1/2" Hub # TR38 has a hub design which means it will fit over the 3" black water pipe and 1-1/2" gray water pipe and secure with some Valterra ABS Solvent Cement - 1/4 Pint # A05-0303.
    view full answer...

  • Replacement 1-1/2 Inch Hub and Valve for Valterra T80 Double RV Waste Valve Elbow
  • The Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # T80 will use the Valterra RV Sewer Spigot with Flange - 1-1/2" # T1005-1 to match the original hub. This secures to your pipe with solvent # A05-0303. The Valterra RV Sewer hub # T1006-1 will also fit but is designed to fit differently than the T80 original connection so it can be a replacement part as well. I've attached a video to help with the dimensions and a couple photos to further assist with dimensions...
    view full answer...

  • Replacement 1-1/2 inch RV Waste Valve without Cable
  • Sounds like you are looking for the part # 34439241 which is a the 1-1/2 inch diameter gray water tank valve but without the cables.
    view full answer...

  • Waste Valve Replacement for 2017 Winnebago Micro Minnie 1700BH
  • RV sewer valves like the Bristol # 34466NDHR19AAA that you referenced are the same valves used by many of the OEM's including, sometimes, Winnebago. We do not have the ability pull build sheets and know exactly what part was installed on your Winnebago Micro Minnie Travel Trailer, but you can look for identifying markings on the currently installed valve to compare. This RV sewer elbow combines (2) 3" waste valves and can be used as a replacement part or to upgrade your existing setup....
    view full answer...

  • Valterra EZ Valve Electric Waste Valve Installation
  • Yes you are correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank part # E1003VP does come with everything you will need. The confusion came from the spigot or hub ends and which one they needed for their application in that question. With a valve that is currently in good shape you will retain your current spigot or hub setup and this valve will simply bolt in between replacing your current valve. This is a great solution because it won't require you to cut and repair...
    view full answer...

  • Sewer Wye with Valves for Gray and Black Water Pipes of Winnebago Mini
  • Thanks for the picture of what you have based on that you are in need of the Double RV Waste Valves - Sewer Wye # T38C.
    view full answer...

  • Are There Installation Differences Between LaSalle Bristol, Valterra, And Camco Wastewater Valves
  • No they will all mount differently. For example, LaSalle Bristol Cable-Actuated RV Waste Valve - Black Water Tank - Spigot to Spigot - 96" Cable, part # 34466N4BB96GM, needs ABS solvent cement, part # 3447530889, to secure the valve to your sewer pipe. Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug, part # T50, also uses ABS solvent cement, part # A05-0303, but Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug, part # T58,...
    view full answer...

  • Replacement for Bristol Dual RV Waste Valves V93B15
  • Yes, the Double RV Waste Valves part # T80 is exactly what you need to replace the Bristol RV Waste Valves V93B15 that you have now. If you want to reuse your existing spigot flange then they will match up to those on the above as the four bolt flange has the same pattern. This will be a direct bolt-on swap for your trailer.
    view full answer...

  • Parts Included in Valterra RV Waste Valve T50A
  • The Valterra RV Waste Valve, part # T50A, consists of both the 3-inch valve spigot and the 3-inch bayonet outer cap. You can see this item in the linked review video.
    view full answer...

  • How Long are the Wires on the Valterra EZ Valve Double Electric Waste Valves Part # E84-8
  • I went out to our warehouse to measure the Valterra EZ Valve Double Electric Waste Valves part # E84-8 for you. The wire lead on the actual valve is about 8-1/2" long whereas the wire lead on the switch is about 7' long for each valve/switch. If you just need the electric valves then we do offer them separately, the Valterra EZ Valve Electric Waste Valve part # E40-8 (3" Hub to 3" Spigot) or the Valterra EZ Valve Electric Waste Valve part # E40A-8 (3" Spigot to 3" Spigot). Unfortunately,...
    view full answer...

  • Gray Water Tank Waste Valve With A 48" Cable Actuator
  • There is currently only a 72" cable # TC72PB available to go with the Valterra Waste Valve for RV Gray Water Tank # T1001PBC. If you want a gray water waste valve with a 48" cable you would need the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank # 34466N11AB48GMA.
    view full answer...

  • Recommended 1-1/2 Inch to 3 Inch Sewer Wye Adapter
  • The 1-1/2 inch pipe is standard for grey water, but not the black water line which is 3 inch. It sounds like you are looking for the connector. The Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR is a great option for this if you have both lines and just want the one outlet.
    view full answer...

  • Determining the Correct Waste Valve on RV
  • I appreciate the photos but I"m not quite sure what you have under there in regards to pipe diameter. The black water tank valve will depend on if it is a hub connection, spigot connection and the diameter. For example, the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Spigot to 3" Spigot # T40A fits inside a 3" diameter pipe while the Valterra Bladex Waste Valve for RV Black Water Tank - 3" Hub to 3" Hub # T40B will fit over a 3" diameter pipe. Essentially, spigot means...
    view full answer...

  • Installation Instructions for the Valterra No-Fuss Flush with Check Valve
  • I spoke with my contact at Valterra and she informed me that the part # A70 would not leak for you and it has no moving parts. I attached a set of install instructions for this product that she sent me as well for you to check out.
    view full answer...

  • Parts Needed For Replacing 1-1/2" and 3" Sewer Coupler With One That Has Waste Valves
  • It appears that you will only need the Valterra Street DWV Fitting # D50-2890 to be able to install the Double RV Waste Valves # TR38 on your sewer system. The main Y of the assembly is likely identical to yours with the waste valves attached to the ends. You will likely be able to cut the ABS pipe at the end of the couplers and not need to extend any of your lines as the waste valve will make up for the portion that you cut off. I have attached a image with the dimensions of the coupler...
    view full answer...

  • How to Choose Correct Valterra Double RV Waste Valves Replacement
  • You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a combination of both. A hub connection fits around the spigot so you just need to check the other side of your waste valves to see if the adapter has fittings that connect on the inside or outside of the pipe they are connected to. Then you just...
    view full answer...

  • Are Seals Included in Valterra Flexible Cable Kit TC1372 for RV Plumbing
  • Some of the photos on our page for the Valterra Flexible Cable Kit # TC1372 show only some of the parts included, so I linked for you the one photo that shows the entire contents of this kit. I also went to our warehouse to inspect one of these and I did find that two each of the black seals for each size valve are included.
    view full answer...

  • Dimensions of RV Waste Valve # T85
  • I took the outermost dimensions of the RV waste valve # T85. It's about 12 inches long, 4-1/2 inches wide, and 9-1/2 inches tall with the handle down or 13 inches with it up.
    view full answer...

  • Can Valve Assemblies on Valterra EZ Valve Double Electric Waste Valves # E84-8 Be Rotated
  • Yes, both valve assemblies on the Valterra EZ Valve Double Electric Waste Valves # E84-8 can be rotated. This will allow you to move them to the needed position for your application so you have clearance for the T-handles. I have attached a video review on a similar Valterra waste valve below just so you can actually see the rotating action.
    view full answer...

  • Determining If Double RV Waste Valves # T18C Could Fit 2016 Coachmen Leprechaun
  • The Double RV Waste Valves # T18C that you referenced is a very common valve on RVs like yours. Theres a good chance this is what you need. This slips over a 3 inch pipe on the bigger siade and the smaller side slips into the 1-1/2 inch pip.
    view full answer...

  • 3 Inch Waste Valve for Black Water Tanks with a Removable Handle
  • We do have a 3 inch diameter black water waste valve with a handle that unscrews but part # T1003VPM doesn't have a removable handle. Instead use part # 34439240 from LaSalle Bristol. Additionally, use part # 34466SP1112 for a 12 inch extension.
    view full answer...

  • Which Valterra EZ Valve Electric Waste Valve To Use
  • You linked to the Valterra EZ Valve Electric Waste Valve for RV Black Water Tank, # E40-8 a 3" Hub to 3" Spigot. The difference between a hub connection and a spigot connection is that the hub is the female end and has a lip on the inside that stops the spigot (or male) end. Please note the three options of a 3" Hub to 3" Hub - # E40B-8, 3" Hub to 3" Spigot - # E40-8 or 3" Spigot to 3" Spigot - # E40A-8. I suggest you remove the current component and examine what you have. For...
    view full answer...

  • How to Remove RV Sewer Pipes From Cable Actuated Waste Valve?
  • In order to install a new Cable Actuator RV Waste Valve # 34466N4AB96GMA, you're likely going to need to cut off the pipes at the spigot and hub in order to install the new waste valve. It's more than likely that ABS sealant was used to weld the pipes to the connections; you can try using concentrated heat (350 degrees Fahrenheit) or acetone, but it's unlikely that those are going to loosen the pipes enough to pull them out of the connections. During this process you may need to replace...
    view full answer...

  • What is Overall Width of Bristol Double RV Waste Valve # 34466NDHR19AAA
  • The overall width of the Bristol Double RV Waste Valve # 34466NDHR19AAA will be 4-1/2 inches.
    view full answer...

  • What is the Difference Between Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8
  • The difference between the Valterra EZ Valve Electric Waste Valves # E85-8 and # E84-8 is the design of the center output tube. On # E85-8 it's a straight, regular hub. On # E84-8 the center tube has bayonet fittings. Based on your pictures you would need # E84-8. However, the input size of either hub is 3 inches so your smaller tubes would not fit without adapting to the tubing size you have up to a 3 inch mating tube to fit the E84-8. It looks like the smaller tubes are 1-1/2 inch...
    view full answer...

  • How to Choose the Correct Valterra EZ Valve Electric Waste Valve for RV Black Water Tank
  • The difference between a hub connection and a spigot connection is that the hub is the female end and has a lip on the inside that stops the spigot (or male) end where it needs to be. I have attached some pictures to assist. With this knowledge it is just a matter of taking your valve off and choosing the correct replacement: 3" Hub to 3" Hub - # E40B-8 3" Hub to 3" Spigot - # E40-8 3" Spigot to 3" Spigot - # E40A-8 I would avoid going with the option that only has the 3" Diameter...
    view full answer...

  • Can the Valterra Waste Valve with Cable For Black Tanks Be Used In Place of a LaSalle Bristol
  • Yes, you can swap out the LaSalle Bristol Cable-Actuated RV Waste Valve part # 34466N4BB72GM that you have for the Valterra Waste Valve Body w/ Flexible Cable part # TC372. The swap will be a direct, bolt-on replacement as you can reuse the spigot flanges that you have now with the above Valterra Waste Valve Body w/ Flexible Cable.
    view full answer...

  • Replacement Waste Valve for RV Black Water Tank
  • I suggest replacing with the Valterra Waste Valve for RV Black Water Tank - Twist On - 3" Bayonet Hooks to 3" Lug Item # T58. We offer this as a complete replacement assembly.
    view full answer...

  • Does Holding Tank Need to be Drilled to Install the Valterra No-Fuss Flush Accessory Kit
  • Yes, you will need to modify your holding tank to install the Valterra No-Fuss Flush Accessory Kit # A71. Essentially what you do is after you drill, or tap, the hole simply take one of the black threaded and barbed pieces and connect it directly to the tank and then put the hose over the barbed end.
    view full answer...

  • Overall Length of Bristol Double RV Waste Valves # 34466ND14AAR
  • The Bristol Double RV Waste Valves # 34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review video you can check out.
    view full answer...

  • Are the Valves Inside the LaSalle Bristol Cable-Actuated RV Waste Valves All the Same
  • Yes, the actual valve is the same for all of the LaSalle Bristol Cable-Actuated RV Waste Valves whether they have a spigot to spigot connection like part # 34466N4BB96GM or spigot to hub connection part # 34466N4AB96GMA. That said, you need to pay attention to the actual valve size as there is options for both 1-1/2" (Gray Water) and 3" (Black Water). The spigot and hub adapters can simply be tossed if you only need the actual valve. The mounting bolt pattern is an industry standard so...
    view full answer...

  • How to Remove Old Sewage Drain Assembly to Install Valterra Double RV Waste Valves
  • Yes, when replacing sewer parts that have been installed with ABS Solvent Cement like part # A05-0303 you will need to cut the pipe right where the old valve is installed so you can install the Valterra Waste Valves # TR38. If you think this will reduce your sewer pipe by too much then you may need to cut most of the old pipe off and add a new piece that is about the same current length. We don't carry any replacement pipe but you should be able to find some at your local hardware or...
    view full answer...

  • Length of Cables That Come with the Valterra Waste Valve Bodies # TC1372
  • The length of the cable that comes with the Valterra Waste Valve Bodies # TC1372 is 72". You don't have to cut the cables but you can if needed.
    view full answer...

  • Replacement Blackwater Valve for 2003 Montana Fifth Wheel
  • Since the valves are plastic welded to the sewer pipe you'll have to cut off what you have and install a new one. So you could use the Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug # T50A which you'd use the solvent part # A05-0303 to attach the spigot end to the pipe and then can use the lug cap to go over the valve when not used.
    view full answer...

  • Dual Sewer Valve Replacement for 1997 Hornet by Damon RV
  • Based on the picture you sent in you'd need a sewer tee and not a wye since the angle of the two pipes is 90 degrees relative to each other in your picture. For that we have the part # T18A which would match the orientation of your pipes. I attached an install picture that shows it installed on a similar setup.
    view full answer...

  • Is There a 3" MPT to 3" Lug Waste Water Valve Available from Bristol
  • The Valterra Waste Valve for RV Black Water Tank # T50C uses the 3" MPT to 3" Lug. We do not have that 3" MPT to 3" Lug set up in the Bristol brand. We do have the Bristol Waste Valve for RV Black Water Tank # 34466N5A which uses 3" Hub to 3" Lug and would require LaSalle Bristol ABS Solvent Cement # 3447530889 to attach since it has the smooth connection. As far as how the Valterra compares to the Bristol they both have a 3" diameter passage that allows the wastewater to travel freely...
    view full answer...

  • Bristol Double RV Waste Valves Dimensions
  • The distance between the 3" entry and the 1.5" entry on the Bristol Double RV Waste Valves # 34466ND13AAR is 10-1/2". I've attached a picture for you showing some additional measurements as well.
    view full answer...

  • Understanding Difference Between Hubs and Spigots for RV Waste Valves
  • You should be able to tell which Valterra Double RV Waste Valves you need by inspecting your current connection points. The one end with the lugs on it is the same on all 3 parts so you simply need to determine if you need hubs, spigots, or a combination of both. A hub connection fits around the spigot so you just need to check the other side of your waste valves to see if the adapter has fittings that connect on the inside or outside of the pipe they are connected to. Then you just...
    view full answer...

  • How Long is the Camco Dual Flush Pro for Rinsing RV Holding Tanks and Sewer Hoses
  • I went out to our warehouse and pulled Camco Dual Flush Pro # CAM39062 to measure the length for you. The overall length from end to end is 8-5/16 inches. I have included a picture showing where I measured.
    view full answer...