How to Install Circuit Breaker with Copper and Silver Posts
Updated 11/09/2015 | Published 11/07/2015
Products Featured in This Question
Question:
How do I wire the breaker. I see gold and silver ? Does it matter
asked by: Stan
1
Helpful Expert Reply:
On a circuit breaker like # 9510 from Pollak the copper-color terminal will connect to the vehicle battery's positive post. The silver-color terminal connects to your 7-way's contact for the trailer charging circuit as shown in the linked photo.
expert reply by:
Adam R
1
click to enlarge
Product Page this Question was Asked From
Continue Researching
- Shop: 40 Amp In-Line Circuit Breaker - Perpendicular Mount Bracket
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Will Redarc Tow-Pro Liberty Fit 2017 Chevrolet Colorado
- Article: Troubleshooting Brake Controller Installations
- Article: Testing Trailer Brake Magnets for Proper Function