Detail K2 Storm II Snowplow - 84" Wide x 22" Tall
Item # K2STOR8422
Retail:$2,358.22
Our Price: $1,899.99
You Save: $458.23
Confirmed to Fit
1998 Toyota RAV4
4 Wheel Drive
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Photos
1998 Toyota RAV4 - Detail K2 Storm II Snowplow - 84" Wide x 22" Tall
- Detail K2
- Vehicle Snowplow
- Requires Custom Brackets
- Wireless Remote and In-Cab Switch
- Adjustable Blade - 3 Angles
- Steel Cutting Edge
- Steel Blade
Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.
Features:
- Heavy-duty, adjustable steel snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Custom-fit mounting brackets (sold separately) attach plow to the front of your truck or SUV
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Electric winch raises and lowers plow with sturdy, nylon strap
- Operate from the comfort of your vehicle with the in-cab switch or the included wireless remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top directs snow down and away from your windshield
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Cross member allows you to quickly attach and remove the snowplow
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
Specs:
- Blade dimensions: 84" wide x 22" tall
- Weight: 283 lbs
- Winch lift capacity: 1,500 lbs
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- 1-Year limited warranty
Note: Due to the size of this item, it ships via truck freight and only to the contiguous United States.
STOR8422 Detail K2 Storm Series II Custom-Mount Snowplow - 84" Wide x 22" Tall Blade
Customer Reviews
Detail K2 Storm II Snowplow - 84" Wide x 22" Tall - K2STOR8422
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Remote-controlled electric winch lets you raise and lower plow from your cab.by: Lary02/01/2018
Works great plows like a 1ton with a 6 k plow on it. Fast shipping easy assembly. Couldn't be happier
by: Dan C12/29/2017
I've had this plow for over a year and still haven't had the opportunity to use it yet ( No Snow ) , assembly was easy enough for one person, like the wheels on the blade had to drill out the holes a little to get the pins to go in , and the stand in the back had to be cut off to keep it from hitting the back of the bumper and not going all the way down. Other than a few minor modifications seems well built.
by: Robert K04/23/2018
2008 Jeep Wrangler Unlimited
Installed on my 2008 jeep rubicon unlimited jk
by: Russel02/22/2022
1994 Jeep Grand Cherokee
5
5
See what our Experts say about this Detail K2 Snow Plow
- What Does Replacement Electric Winch K2EW8020 Fit?The Replacement Electric Winch for Detail K2 Snowplows # K2EW8020 is a direct fit as a replacement for a number of Detail K2 Snowplows. It is designed to be mounted with the Avalanche # K2AVAL8219 and # K2AVAL8422, Rampage K2RASP8219 and Rampage II # K2RAMP8219, Storm K2STSP8422 and Storm II # K2STOR8422 as well as the Summit K2SUSP8826 and Summit II K2SUMM8826. This replacement includes the cab-mounted switch which allows you to use your K2 from inside your truck.
view full answer... - Do the Detail K2 Snowplows Come with a Mounting Kit I do have the mounting kit you would need to install a snowplow such as the Detail K2 Storm II Snowplow part # K2STOR8422 on your 2000 Dodge Ram Pickup but the mounting kit is not included with the snowplow. For a mounting kit that will allow you to attach the above snowplow to your Ram, you would need the Custom Mounting Brackets for Detail K2 Snowplows part # K284309. As long as your Ram is not a sport model then the above mounting kit will work well for you.
view full answer... - What is the Replacement Electric Winch # K2EW8020 Used forThe Replacement Electric Winch # K2EW8020 is meant to be a replacement for the winch that comes with the snow plows; Rampage K2RASP8219, Rampage II # K2RAMP8219, Storm K2STSP8422, Storm II # K2STOR8422, Summit K2SUSP8826, and Summit II K2SUMM8826. The Control Box connects to the winch, the battery, and the control button that will be in the cab. This allows operation of the winch without having to get out of your vehicle. There is an instruction manual for the snow plows that this winch...
view full answer... - Recommended Snow Plow and Front End Suspension for a 1994 Ford RangerYes, the Custom Mounting Brackets for Detail K2 Snowplows item # K281110 are confirmed to fit your 1994 Ford Ranger. These will allow you to mount the Detail K2 Storm II Snowplow item # K2STOR8422 to your truck. It is recommended when using a snow plow to add additional suspension support. I recommend the Timbren Front Suspension Enhancement System item # TFXF1004 which fits the 4WD models of the 1994 Ranger.
view full answer... - 1984 Dodge Ramcharger Prospector Mounting Brackets for SnowplowI believe you're looking for the Custom Mounting Brackets for Detail K2 Snowplows # K284303 which fits a '74-'93 Ramcharger. I'm not entirely sure what all is included with the W-159 Prospector setup that you have, but this kit fits the base model so if nothing changed for the front of the frame and body you'll be able to install this with no issues. If something did change then you'll need to have something fabricate as Detail K2 doesn't have a variety of options for the older pickups. This...
view full answer... - Does The Snowplow Cross Member Come With The Snow Plow Package I emailed the Details representative and I was informed that the Custom Mounting Brackets for Detail K2 Snowplows, part # K286625, does not come with the cross member. The cross member comes with the plow package. I have included a product description link below.
view full answer... - Snow Plow Recommendation for 2001 Toyota 4RunnerI have a solution that will allow you to use a snow plow with your 2001 Toyota 4Runner but since there are no front hitches for your 2001 Toyota 4Runner you'd have to look into a setup that uses mounting brackets like the Detail K2 Storm II part # K2STOR8422 and then use the custom install brackets # K285120 which are custom fit for your vehicle.
view full answer... - Correct Detail K2 Storm II Snowplow and Custom Bracket Kit for 1994 Jeep Grand CherokeeYes, the Detail K2 Storm II Snowplow # K2STOR8422 and the Custom Mounting Brackets # K284102 will fit your 1994 Jeep Grand Cherokee. There are a handful of different snowplow options that will work with a '94 or '96 Grand Cherokee which is why there may be different recommendations.
view full answer... - Will Detail K2 Custom Mounting Bracket Kit K283007 Fit FirstTrax SnowplowDetail K2 Custom Mounting Bracket kit # K283007 is a confirmed fit on your 2001 GMC Sierra 1500 LD and it works with their Rampage II # K2RAMP8219, Storm II # K2STOR8422 and Summit II # K2SUMM8826 plow models. My contact at K2 said the mount will work on the FirstTrax Prosumer model plow.
view full answer... - Can Detail K2 Storm II Plow be Used with 2018 Ram 1500Sorry for the confusion Franklin! But you can use the Detail K2 Storm II part # K2STOR8422 with your 2018 Ram 1500 with the correct custom brackets for your truck part # K284314. With these two part numbers you would have everything you would need including the crossbar. The custom mounting bracket plow options are a lot better than the front mount options which just aren't quite as secure. Fun fact we've ripped a couple front hitches off a Highlander here using a front hitch plow setup.
view full answer... - Can K2 Snow Plow part # K2STOR8422 be Installed on Vehicle Travelling Public RoadsIt's not illegal to have the K2 Snow Plow part # K2STOR8422 installed on your truck when traveling on public roads but you would need to be aware that your front license plate may be obstructed as well as your head lights. As far as where you can legally plow that would be a question you would need to ask your local DOT.
view full answer... - Do the Detail K2 Customer Mounting Brackets for Snowplow Bolt on to a 2006 Jeep Commander FrameThe Custom Mounting Brackets # K284104 are a little different than the majority of the other mounting brackets that Detail K2 offers. This kit actually wedges between parts of the frame on your 2006 Jeep Commander. Once the mounting brackets are in place then you can install the Detail K2 Storm II Snowplow # K2STOR8422. I have attached a photo from the instructions showing how it installs.
view full answer...
- Does The Custom Mounting Bracket For My 2000 GMC Sierra Come With The Detail K2 Storm II SnowplowYes it does. If you get the following items, Detail K2 Storm II Snowplow - 84" Wide x 22" Tall, part # K2STOR8422, and the Custom Mounting Brackets for Detail K2 Snowplows, part # K283007, you will get the K2 Storm II Snowplow and the mounting bracket in one package. I have included the product description of the snowplow below. ,
view full answer... - Recommended Snow Plow and Custom Mount for 1985 Ford F-250 4WDYou are correct there isn't a front hitch receiver for your 1985 Ford F250 4x4, but you are still able to put a plow on your truck. You can use the Custom Mounting Brackets for Detail K2 Snowplows # K281516 and then use one of the following plows compatible with the mount: # K2RAMP8219 which is 82 inches wide and 19 inches tall # K2SUMM8826 which is 88 inches wide and 26 inches tall # K2STOR8422 which is 84 inches wide and 22 inches tall # K2SUMM8826ELT which is 88 inches wide and 26...
view full answer... - Snow Plow Brackets for Detail K2 Storm II for 1999 Toyota TacomaFor your 1999 Toyota Tacoma the brackets you'd need are the # K285120 to use the Detail K2 Storm II Snowplow part # K2STOR8422 that you referenced.
view full answer... - Difference Between Detail K2 Summit II and Storm II SnowplowsThe only difference between the Detail K2 Summit II Snowplow # K2SUMM8826 and the Detail K2 Storm II Snowplow # K2STOR8422 is the actual size of the snowplow. The Summit II is 88" Wide x 26" Tall while the Storm II is 84" Wide x 22" Tall. If the vehicle you plan on using the plow with is the 1989 Jeep YJ you input for your vehicle info then the mounting brackets you need for either of the plows mentioned above come in the Kit # K284115. Let me know if you have a different vehicle and...
view full answer... - Plow and Mount Recommendation for Installing K2 Detail Storm II on 2002 Ford F-150To install the Detail K2 Storm II Snowplow - 84" # K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part # K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.
view full answer... - Recommended Detail K2 Snow Plow and Custom Mount for a 2017 Toyota TundraThe Detail K2 Snowplow and Custom Mounting Bracket Kit for Detail K2 Snowplows that I recommend for a 2017 Toyota Tundra is the Storm II part # K2STOR8422 and Storm II Brackets part # K285113. The Storm II is an excellent option because it has a very large 84" wide blade for increased plowing capability, a 3 position adjustable blade for full control of the plow, and a wireless in-cab controller for ease of use. The Storm II Brackets are a custom bolt-on fit for the Tundra so no drilling...
view full answer... - Detail K2 Snowplow Mounts for 2003 Dodge Ram 2500We do have a bracket kit that is a fit for your 2003 Dodge Ram 2500, part # K284312. According to K2, the # K284219 you'd looked at isn't a fit for your truck. This bracket kit is a fit for Fits Rampage II (K2RAMP8219), Storm II (K2STOR8422), and Summit II (K2SUMM8826) plows.
view full answer... - Detail K2 Snow Plow Mount Fit for 1995 Dodge Dakota 4x4 Club CabAccording to the manufacturer, Detail K2, for your 1995 Dodge Dakota 4x4 club cab you'll need the # K284125 bracket kit you'd referred to. This bracket kit is compatible with the # K2RAMP8219 Rampage II, # K2STOR8422 Storm II and # K2SUMM8826) Summit II plows.
view full answer... - Detail K2 Custom Mount Brackets for 2006 Honda Ridgeline 4WDFor your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets # K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo to assist. This mount is only a confirmed fit for the 4WD Ridgeline. If you want to use the custom mount, you will need to update your plow to the linked options which are confirmed to work with that mount on your truck: Rampage II # K2RAMP8219 Storm...
view full answer...
- Detail K2 Snow Plow Receommendation for 1995 Jeep Wrangler YJThe Storm II plow you'd looked at, part # K2STOR8422 doesn't mount using a hitch, it mounts directly to the frame of the vehicle using the # K284115 (sold separately) bracket kit, so you wouldn't need a front hitch. Actually, this would be a better alternative for you than the hitch mounted plow, as the 23 inch height of the # 31408 receiver would indeed be too tall, as K2 recommends a maximum hitch height of 20 inches. If you tried to go with a hitch mounted plow, your blade would sit...
view full answer... - Do I Need to Remove the Air Dam Brackets in Order to Install the # K284314 on My 2019 Ram 1500?I went ahead and reached out to my contact at DK2, and he said that you are correct in saying that you will have to remove the air dam on the bottom of the bumper of your 2019 Ram 1500 Classic in order to install the mounting brackets # K284314 on a DK2 snow plow like # K2STOR8422. When it comes to removing the air dam brackets, my contact unfortunately could not confirm for sure whether the brackets need to be removed. With that being said, the best route forward is to see if you can...
view full answer...
- Plow and Plow Mount Kit Recommendation for 2003 Ford F-150 4x4For a mount kit for the Detail K2 style of plows which work very well you'd need the part # K281512 for your 2003 Ford F-150. Then the Detail K2 Storm II Snowplow # K2STOR8422 could easily be used and would work well. This would give you an 84 inch wide plow setup for the front of your 2003 Ford F-150.
view full answer...
Do you have a question about this Snow Plow?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Mark S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dan C.
1/24/2019
Finally got enough snow to use my plow. Seems to clear better in the straight position rather than the angle position. Takes less than 10 minutes to hook it up or take it off, big time saver.