Bumper Mounting Bracket for Putco 40" Luminix LED Light Bar

Video Transcript for Putco Off Road Lights - Light Mounts - P2255 Review

Today we're going to be taking a look at part number P2255 this is the Putco bumper mounting bracket for the Putco 40 inch Luminax LED light bar. The cradle mounting bracket is going to let you install your light bar on the front bumper of your vehicle. This does the fit the Putco Luminax 40 inch long off road LED light bar, part number P10040. That item is sold separately. This is made from a sturdy, rust proof, stainless steel construction and it has the corrosion resistant black powder coat finish to make sure that it lasts a long time especially standing up against the elements. Your mounting hardware is included. You're going to get your four bolts, flat washers and lock knuts.

The product is made in the USA. We're going to take a look at the overall length measurement real quick, measuring from edge to edge. We're measuring here at the base, that's going to give us a measurement of 41 and 7/8 of an inch. You can see you have the mounting slots that go pretty much the entire length of the bar. This bar, if we take a measurement of the width, that's going to measure 1 and 3/4 inches of an inch wide. The height from the bottom edge right to the top is right around 2 inches.

These mounting slots are going to be separated, measuring the distance between the mounting slots. Those are going to be separated by about 2 and a half inches. Those mountain slots are going to give us a length measurement of about 3 and a half inches. We've got the cradle mounts here on the edge. That's going to hold the light bar. Again this is designed for part number P10040, the 40 inch long LED light bar from Putco. That's going to do it for our review of part number P2255..