Wheel Covers Hubcaps Specs:
Features:
Stylish, durable stainless steel wheel covers with a mirror polish will dress up your Ford that has 19-1/2", 8-lug wheels with 8 hand holes. Includes 4 hubcaps, hardware and a dual-tire inflation kit.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Wheel Covers Hubcaps Specs:
Features:
These stylish wheel covers fit your vehicle that has 19-1/2", 8-lug wheels with 8 hand holes. The plastic covers are finished with mirror-polished stainless steel, and they easily snap into place - no hardware required.
Installation Notes:
Designed for models with dual rear wheels only
More Information >Videos
for Wheel Well Liner
Help Articles
for Wheel Well Liner
Expert Answers
for Wheel Well Liner
Hey Ron, thanks for reaching out! We have two different steering stabilizers for your motorhome on a 2018 Ford F-53 chassis; the Roadmaster Reflex and the Roadmaster Exact Center. The Exact Center was supposed to be an upgrade to the Reflex but…
view full answer...The only real difference between the Alpha Systems #AL74UV and the LaSalle Bristol #3441700534142711440 is that the Alpha Systems is made of TPO which is a bit less flexible than Elvaloy-based PVC that #3441700534142711440 uses; PVC is going to be…
view full answer...Using the SumoSprings Maxim Custom Helper Springs #SSR-180-54-1 will greatly reduce the amount your 2020 Winnebago Adventurer 36Z leans to the passenger side. You will want to install these on both sides otherwise you will have very different…
view full answer...I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit #TFRTT350J is designed more for…
view full answer...Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…
view full answer...For your 2014 Chevrolet Silverado 3500 you're going to want the TorkLift Camper Tie-Downs #TLC2219 for the front rear #TLC3212. You're also going to need a set of turnbuckles #TLS9020 to secure your camper to…
view full answer...To start with, the Westin Fey Diamondstep Rear Bumper #20002-92230 will fit your 1997 Ford F-250 HD so long as it is a standard bed model. The Curt hitch #14001 is also a fit for '97 F-250 HD's that have step…
view full answer...Thanks for reaching out, those factory bumpers are a unique situation but I have a solution or two for you: **Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #13184. *Westin Fey Surestep Rear Bumper - Black Powder…
view full answer...For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…
view full answer...You definitely don't have enough clearance so it is a wonder your wheels don't rub under suspension travel over bumps. Since your 2019 Little Guy Max travel trailer has torsion axles, the correct fit for that…
view full answer...Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…
view full answer...Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part #HP29VR you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part #CE26098G-2. If you do not…
view full answer...