1985 Chevrolet C/K Series Pickup Windshield Wiper Blades

I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, the Wiper Technologies Heavy Duty Windshield Wiper Blade - Beam Style - 36" - Qty 1, part #WPR66FR, will attach via a j-hook. It comes with an adapter that makes it compatible with a j-hook style wiper. I have included an…

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the…

Your 2021 Ram 3500 uses 24" wiper blades. The #RX5079274-2 are only 16" long and we don't have a 24" in this style. What you can use instead is the Michelin Stealth…

We carry replacements that could integrate into your Dometic AC system, but before purchasing anything you'll need to remove the cover of your air distribution box under the unit you're wanting to replace and…

The Lippert Components Lead Leg Replacement part #LC179013 is the leg that has the motor.

Here is the wiring diagram from SeeLevel for the Monitor #SE94VR. I hope this helps you clear things up and get it working.

To connect a Curt Tow Bar #C26FR to your Blue Ox Base Plates #BX1143 all you need is an adapter #BX8833. The non-binding feature makes it easier to unhook to tow bar when you're on an uneven surface. Not being level can cause the…

We do not carry the Innoflame line of RV fireplaces. However, I do have other potential options for you depending on the size of fireplace that you have. I have also listed the wall cut-out dimensions for each fireplace, so that you can determine…

There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…

Are you sure that's the number you found? I can't find any references to it anywhere.