For a 2-5/16-inch hitch ball to go along with the B&W Heavy-Duty Ball Mount #BWBMHD30013 you will want to use part #BWHB94003. This ball has a longer shank (3-1/4-inches) as compared to the B&W part #BWHB94002 whose shank is only 2-1/2-inches…
I still highly recommend using a slider since your 2020 GMC Sierra 3500 only has a 6-3/4' bed. Using a non-sliding hitch could result in your camper making contact with the cab of your truck when making turns. Since you want a B&W hitch and…
We can get you a more comfortable ride, though the Road Armor equalizers truthfully won't do the job as an upgrade over the CRE3000 MORryde Rubber Equalizers like #MR87ZR or #MR27ZR, they would just be replacing one upgraded equalizer with…
There will be different dimensions between the hangers. From front to back your hangers for that 20-3/8 inch spring like #e84SR will be 24-3/4 on center then 29 inches on center and finally 24-3/4 inches on center. This will put each of the 3 axles…
The Torklift Superhitch part #TL74FR that fits your 2022 Chevy Silverado 3500 with the factory hitch does require removing the factory hitch to install. The factory bumper does get reinstalled but it does initially come off to install this hitch.…
Hey George, sorry to hear about your previous experience with your leaf spring setup. I've been stranded on the side of the road because of a trailer malfunction as well and it definitely isn't a pleasant experience so I understand where…
Yes, it will Jared! The Reese Titan 30867 5th wheel hitch attaches to industry standard rails. The Adapter Rails item #C88KR provide you with the same mounting pattern and attach to the factory puck systems of the the Chevy, Ford, and GMC trucks. The…
The differences are the dimensions of the hangers and equalizers of the three kits. The #APTT1 uses totally straight equalizers and taller center hangers. The #APTT3 uses more traditional sized equalizers and center and outside hangers that differ in…
Front and rear suspension hangers are not often the same height like this but they can be. If you have the hanger spacing right then what will happen is the center of the spring will be offset a little between the two hangers to compensate some for…
The spring hanger mounting dimensions for the Triple-Axle Trailer Hanger Kit, item #APTT3, are as follows. From the center of the hole in the front hanger, to the center of the hole in the center front hanger, the distance should be 29-1/2 inches.…
The bags are different between the two kits so your best option would be just to go with the #AL88341 which comes with everything you would need Richard.
Equalizer bolts, like the TruRyde Wet Equalizer Bolt, #TRFA71063, should be torqued to yield. Equalizer bolts are not given a specific torque rating because they should allow some movement of the equalizer. If they are torqued down too tight, the…
