Videos
for Ford Transit T150 Owners
Help Articles
for Ford Transit T150 Owners
Expert Answers
for Ford Transit T150 Owners
The first error code, SH, you are seeing on the Prodigy Brake Controller (instructions linked below) means the brake wire sees a short circuit during idle condition. The second code, OL, indicates an overload condition during operation. For the first…
view full answer...If you click on the link that I have provided for the installation instructions, you can see the troubleshooting chart just below the installation details. The SH code that you see on your Tekonsha PRIMUS IQ brake controller indicates there is a…
view full answer...You can use a 4-way to 7-way adapter like the part #37185 to install a Prodigy RF part #TK94FR but you have to connect the black wire of the #37185 up to the positive post of the vehicle battery through a circuit breaker like part #9510. Once you do…
view full answer...The specific part number you referenced from Wesbar has been discontinued so your best option is to go with the closest style that is still available the part #271595 for the driver's side and #271594 for the passenger side. This is an LED…
view full answer...It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
view full answer...The Ford Transit if equipped with the factory tow package would have came with both a trailer hitch and trailer connector and they would both be located directly under the rear bumper so odds are you do not have either because they are not hard to…
view full answer...



























