Custom Fit 2019 Chevrolet Silverado 3500 Accessories

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

Hey Jackie, thanks for all the information. We have two options to replace the cover on your Dometic, model 620525.331c. The only difference is the color they each measure 40-¼" L x 28-½" W x 7" T. I have listed them below:…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hey Tim, The adapter rails for GM's towing prep package that your SuperGlide #PUL63RR will mount to are under part #PUL69RR (4452).

It sounds like you are looking for parts to flat-tow a 2019 Chevrolet Silverado 3500 and if that's the case then yes this is possible and we have everything you need for this. I have attached a full, comprehensive list for you below with…

Yes, the SumoSprings Rebel Custom Helper Springs #SSR-203-47-2 will fit the 2024 GMC Sierra 3500 your customer has.

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Hi Robert; you will need your hub face measurement to find the right replacement axle. See the video attached below which explains how to measure. We have the 89" #e53GR or 95" #e83GR with the 4" drop. Since your spring center…

We do not carry the Reico-Titan products so my research was more limited but after doing some research I was able to locate the installation instructions for the Reico-Titan Jacks. They have brackets listed specifically for the "C" clamp…

I reached out to the manufacturer, Buyers Products, who told me an ICC bumper is NOT required on your truck in order to install the Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with Pintle Mount #3371809050 or the same bumper with 2"…

Hello John. Great question, and congrats on the upgrade to the 3500. For your new 2015 Chevy Silverado 3500 I am showing that the TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TLC2219 will transfer over just fine as long as the truck is a…

If you are looking for a rack system to install on top of a hard shell tonneau cover then I do have an option for you in the Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B. This system has tracks so you can adjust the crossbar spread…