The smoke might let a little more light through it, but nothing that noticeable. And aside from that either color does not have the reputation as lasting longer than the other. The white version is part #BV0554-01 and the smoke version is part…
The most important part of choosing a weight distribution system is choosing a system that is rated to work with the weight of your trailer. Be sure you verify the gross trailer weight of your cargo trailer. Based on the 800 to 1,000 lb tongue weight…
Ford isn't super-clear about identifying the trailer lighting fuses in their owner's manual for your 2015 Ford F-250 Super Duty. I've shown several different fuses in the engine compartment and the passenger cabin fuse blocks that they…
Unfortunately, we do not have any replacement top parts for your Greystone RV Range. Rather than trying to find a used part or a whole top you can locate a glass shop near you with the dimensions needed and they should be able to cut you a matching…
The standoffs/nubs on the backside of the Lippert RV Entry Screen Door Latch #LC201471 that you referenced can indeed just be sanded off or cut off so that it can lay flat against your door. This right hand latch will install on the left hand side of…
Each of the trailer idler hubs with a 5 on 5" bolt pattern are a fit for 3,500 lb axles and use inner bearing #L68149 (1.378" inner diameter), outer bearing #L44649 (1.063" inner diameter), and grease seal #58846 (1.719" inner…
For a Lippert 4,400 lb trailer axle the correct bearing kit is the part #BK2-100 which includes inner bearing #L68149, inner race #L68111, outer bearing #L44649, outer race #L44610, grease seal #58846, a cotter pin and a tang washer.
The Furrion Pure Sine Wave Inverter #FIVBDP10A does have a port for a remote, but there is not a specific remote for the Furrion Pure Sine Wave Inverter. I contacted the manufacturer about the remote. They informed me that there is not a specific…
Hey Chad, yes the Lippert stabilizer jack system part #LC298707 is the current replacement for the 1917771. It's actually twice as fast as what you mentioned so it will be a really solid upgrade.
Yes, if the support arms on your Lippert Power Jack Stabilizer 1917771 are black then you will need the Replacement Electric RV Stabilizer Jack Motor part #LC138445. If they are yellow then you will need the Replacement Electric RV Stabilizer Jack…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
