Videos
for Nissan Xterra Owners
Help Articles
for Nissan Xterra Owners
Expert Answers
for Nissan Xterra Owners
In order to choose the correct load range for a trailer tire you'll need to know the full loaded weight of the trailer. The sum of the tires weight capacity needs to be rated for about 10-15% less the weight of the loaded trailer as the rest will…
view full answer...You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…
view full answer...Yes, when towing a trailer with a weight over half that of the tow vehicle you will need to use a weight distribution system. This system will be based solely on the trailer and its tongue weight. If the trailer weighs 4,000 lbs then we can estimate…
view full answer...Since you have an existing 4-pole connector, you are correct, the Brake Controller Installation Kit, part #ETBC7 should be everything you need to install your Prodigy P2 brake controller, part #90885. We have a wiring diagram that illustrates the…
view full answer...It sounds like you may already have a 4 way connector on your vehicle, which is half of the battle. In order to operate the Curt Echo Mobile Wireless Brake Controller #C51180 you will need an almost fully functional 7 way connector; using something…
view full answer...No, you can not and the Hellwig EZ-550 Helper Springs item #HE72FR mount on top of the leaf springs. However, they do not fit a 2012 Nissan Xtrerra. The only option we have for a leaf spring system for your Nissan are the RoadActive Suspension Custom…
view full answer...All 2014 Nissan Xterras will have at least some part of the tow package wiring but not all of them. Models that came with the factory tow package will have everything including a connector at the back. To determine if your Xterra has all of the…
view full answer...The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…
view full answer...I did some checking and your 2006 Nissan Xterra with a manual transmission is flat-towable as-is so all you need is the flat towing components and you'd be set. So the first thing you need is a base plate kit to provide the tow bar connection on…
view full answer...Since your 2009 Nissan Pathfinder already has a factory 4-Way you can use #118267 to install a 7-Way. But to retain the use of a 4-Way you would need to replace the 7-Way that comes with the harness with #HM40950. Or you could use an adapter like you…
view full answer...There is no way to lock the Curt Echo Mobile Trailer Brake Controller part #C51180 to your vehicle, that is correct. In order to deter theft you will want to unplug the unit and place it in your truck each time you are in an unfamiliar area. The unit…
view full answer...