The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
The TruRyde Spindle Nut #165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached a video of an installation of a hub to assist.…
I spoke with my contact at Timbren and they said they have sold many of the Timbren Rear Suspension, part #TDDR00 for the 1997 to 2004 Dodge Dakota and have not had any issues with them hitting or interfering with factory brake lines. This will fit…
It is very easy, as you just use the included clamps to secure the Caprock to your roof rack crossbars. The clamps are secured to the channels under the platform, and can be positioned wherever needed to accommodate the spacing of your crossbars. And…
Since a 2001 Dodge Dakota and 2003 Durango share the same Westin grille guard fit of part #40-0145 the correct replacement hardware kit you'd need is the #40-014PK and you'd be set.
We have you covered because the correct replacement mounting hardware for the Westin Sportsman Grille Guard #40-0145 on a 2003 Dodge Dakota is the Replacement Hardware Kit for Westin Sportsman Grille Guard #40-014PK.
For your 2001 Dodge Dakota, you will want the Replacement Hardware Kit for Westin Sportsman Grille Guard - New Style - fits ( #40-0145 and 45-0140 ) and is part #40-014PK. The #32-014PK will not work for the grille guard.
The Westin Bumper, #31012, comes with new brackets and mounting hardware. It is a no-drill installation. It also comes with the face bar, pads and the light assemblies. Everything on this bumper will match the OEM specifications of the factory…
I have confirmed with my contacts at Westin and the #31012, that you referenced is confirmed as a fit for your 2004 Dodge Dakota Quad Cab, as long as it is an R/T, SLT or base model. According to my contact the exclusions regarding bumper fit on the…
To install a controller in your Dakota, you will need the controller, the #ETBC7 install kit, and a functioning 4-pole trailer connector. If your Dakota does not already have a 4-pole connector, one can be installed by using part #118323. If you do…
