Custom Fit 2017 Ford Expedition Accessories

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

The blue wire you found at the rear should terminate in the brake controller install connector that's located behind the dash panel as shown in the provided photo. Just to the right of the steering column there's a coin tray where the OEM…

What you're looking for is the Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System #BLU64XR. These spring bars will work with any Blue Ox 2 point WDS and have the same 800 - 1,200 lb tongue weight rating you mention.

The chain lift brackets that come with the Curt MV Weight Distribution System #C17052 have a single 1/2" bolt that is used to secure the bracket to your trailer frame. The instructions call out to turn the bolt until it makes contact with your…

If you already have a 4-way trailer connector on your 2017 Ford Expedition and you need a 7-way trailer connector then I have two options for you. Please note that if the trailer you are towing has a 7-way trailer connector then odds are this is…

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

If you choose a hitch that is too light for your application it will not be effective. If you choose a hitch that is too heavy, you'll suffer a rigid ride and a bouncy trailer. Ideally you want a system that has a tongue weight capacity where…

To determine the tongue weight of your trailer when it is unloaded or loaded will require you to weigh it. For more info on that check out the link I attached. The tongue weight of a trailer isn't always listed. The best way to pick out a weight…

The MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways #MR98RR is going to be 36" in length from the hinge to the furthest part out. If you don't have enough clearance in your RV bay then you can detach these steps so…

I was able to find info on the B and B 571 vacuum breaker that you have and while we don't have that specific breaker we do have the part #A10-3050 which would work well and function the same.

The CIPA Universal Towing Mirrors #7070-2 are the best universal towing mirrors you can use on your 2017 Ford Expedition XLT as we do not have any custom fit or replacement mirror options for your SUV. These universal mirrors have adjustable arms to…

The K-Source tow mirrors #KS3990 would work great on your 2023 Ford Expedition. We had a chance to install them on a similar 2018 Ford Expedition and found they installed easily, worked great, and the highest reviewed option we know fits.