Hands-On with the Optronics LED Trailer Clearance or Side Marker Light Video

I checked with the manufacturer, Polar, about the Ramp Door Hinge part #PLR1902 and they unfortunately do not list a weight capacity as much of this would come down to how it's installed, the number used, and the quality of the welding. That…

For your Dexter 12,000 lb axle the seal you are looking for based on my research is the #10-56. It has an inner diameter of 3.125 inches and an outer diameter of 4.5 inches. This will work well for oil or grease. If you are needing the other seal for…

Hey Tom. The highest capacity drum brake assemblies we have for a 4 bolt brake flange are the Dexter Electric Trailer Brakes item #23-105-106-09. These are a 6,000 lbs set that are mainly used with AL-KO/Hayes axles. Do you have any part numbers or…

Although the DOT numbers you gave me are codes for what testing was done on the lights, I do have a solution for you. For your 2-1/2" round clearance light we have the Peterson Piranha LED Light #162R with the wiring and grommet as part…

Our installer here will spray the light with some lubricant around where the light meets the grommet and then will use a screwdriver to pry the light out first, and then the grommet. If you check out the install video I attached you will see this…

The best way to find the correct electric brakes for a trailer is with the axe capacity which can be found on the axle tag in the center of the beam. The brakes appear to be rather small so the most likely candidate without knowing the capacity is…

There are a couple of options to lift your trailer depending on if your axle's sit above or below the leaf springs. If you have torsion axles these systems won't work and I'll need to know what number axle you have to recommend the right…

The generally accepted clearance between the overhang of a gooseneck hitch and the bed rails of a truck is 4-6 inches. Most will say that 6 inches at least is ideal as the minimum but 5 inches would be enough for most situations. If the trailer is…

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

The Optronics Chrome Trim Cover #A55CB is designed to fit 2 inch grommet mounted trailer lights. We don't currently have the Peterson beehive style lights that you mentioned and I wasn't able to track down its specific dimensions. If you…

In regards to the Mini LED Identification Light Kit for Trailers part #OPT29FR, you will need to remove the grommet from the light and then push the light through the hole. Then, you can reinstall the grommet securing the light inside the hole.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…