Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...Custom-fit, cab-length running boards provide a solid step for entering and exiting your vehicle 6-1/4" Wide steps provide greater stability than narrower steps or round bars R...
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
While most applications are No Drill, some vehicles may not have all of the factory mounting holes and may require drilling
More Information >Tube Step Specs:
Features:
...Custom-fit, cab-length running boards provide a solid step for entering and exiting your vehicle 6-1/4" Wide steps provide greater stability than narrower steps or round bars R...
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Round profile with extra-thick sidewalls creates a rugged, off-road style. Constructed of lightweight, rustproof aluminum alloy.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the polished finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the polished finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
Product can be mounted along any of the doors
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the polished finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
Product can be mounted along any of the doors
More Information >Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These custom-fit award-winning nerf bars feature a notched bar design. The step pads are wider than on competitors' nerf bars and their die-stamped design provides strong traction. Steel construction with a textured black finish.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 4" oval tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Black powder coat finish on the steel resists rust and corrosion. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 4" oval tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Polished stainless steel tubes provide lasting durability. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends offer a finished look and prevent internal corrosion. Constructed of rustproof carbon steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Black powder coated steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable steel step plates are rustproof. Hardware is included.
Installation Notes:
Drilling required for installation
Designed for models with 6-1/2' bed only
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Black powder coated steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable steel step plates are rustproof. Hardware is included.
Installation Notes:
Drilling required for installation
Designed for models with 5-1/2' bed only
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you access both your truck cab and bed quickly and easily. Footpad areas are recessed to prevent internal corrosion.
Installation Notes:
No drilling required for installation
Designed for models with 5-1/2' bed only
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you access both your truck cab and bed quickly and easily. Footpad areas are recessed to prevent internal corrosion.
Installation Notes:
No drilling required for installation
Designed for models with 6-1/2' bed only
Tube steps are installed by attaching mounting brackets to the rocker panel
More Information >Tube Step Specs:
Features:
These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rustproof stainless steel and have molded endcaps to keep out moisture. Custom mounting kit is included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.
Installation Notes:
While most applications are No Drill, some vehicles may not have all of the factory mounting holes and may require drilling
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the black finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
Product can be mounted along any of the doors
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the black finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
More Information >Tube Step Specs:
Features:
Get in and out of your vehicle with ease by using these rugged, aluminum alloy steps. Diamond tread surface provides sure footing, and the black finish complements almost any application. Multi-Mount system ensures a precise, stable fit.
Installation Notes:
Drilling is required for installation
Product can be mounted along any of the doors
More Information >Tube Step Specs:
Features:
Black powder coated stainless steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable stainless steel step plates are rustproof. Hardware is included.
Installation Notes:
Drilling required for installation
Designed for models with 6-1/2' bed only
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
...Custom-fit, cab-length running boards provide a solid step for entering and exiting your vehicle 6-1/4" Wide steps provide greater stability than narrower steps or round bars R...
Installation Notes:
Drilling required for installation
More Information >Tube Step Specs:
Features:
Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Black powder coated stainless steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable stainless steel step plates are rustproof. Hardware is included.
Installation Notes:
Drilling required for installation
Designed for models with 5-1/2' bed only
More Information >Tube Step Specs:
Features:
Custom-fit, oval nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Fully sealed ends with 20-degree bends offer a finished look and prevent internal corrosion. Constructed of rustproof stainless steel.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 4" oval tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Black powder coat finish on the steel resists rust and corrosion. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
Custom-fit nerf bars have extra-wide, non-slip step pads that let you easily enter and exit your vehicle. Round profile with extra-thick sidewalls creates a rugged, off-road style. Constructed of lightweight, rustproof aluminum alloy.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.
Installation Notes:
No drilling required for installation
More Information >Tube Step Specs:
Features:
These 4" oval tube steps make it easier to climb in and out of your truck. Their molded plastic step pads are non-skid for secure footing. Polished stainless steel tubes provide lasting durability. Custom installation kit included.
Installation Notes:
No drilling required for installation
More Information >Videos
for Nerf Bars - Running Boards
Help Articles
for Nerf Bars - Running Boards
Expert Answers
for Nerf Bars - Running Boards
The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…
view full answer...On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…
view full answer...The number you provided, "7753400" is a patent number which corelates to the Equalizer…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…
view full answer...The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...It sounds like the 2022 Chevy Silverado 3500 you are getting has the short bed. In that case, yes, you definitely want the sliding 5th wheel hitch for clearance. The good news is you will not need to purchase the entire…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...