2011 Ram 3500 Nerf Bars - Running Boards

Features:

The curved ends on these rustproof, polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Features:

Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

The aluminum bases of these step boards are covered in molded polymer for sure footing. Integrated light assemblies turn on when the doors are open. Boards sit close to your vehicle's frame for a streamlined look. Custom mounting kit is included.

Installation Notes:

Drilling required for installation

Features:

The aluminum bases of these step boards are covered in black molded polymer for sure footing. Each board sits close to your vehicle's frame for a streamlined look. Custom mounting kit is included for bolt-on installation.

Installation Notes:

Drilling required for installation

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Features:

Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.

Installation Notes:

While most applications are No Drill, some vehicles may not have all of the factory mounting holes and may require drilling

Tech Tip:

Product does not fit Chassis Cab with DEF tank.

Features:

Chiseled-style, custom-fit step bars fit close to your vehicle for a seamless look. Oversize, textured step areas drop down to provide good footing for an easy step up. Sturdy, 1-piece steel construction has rust-resistant black powder coat finish.

Installation Notes:

While most applications are No Drill, some vehicles may not have all of the factory mounting holes and may require drilling

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you easily access both your truck cab and bed. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

Grated steel running boards have an extra-wide stepping surface with raised treads to prevent slipping when entering your truck. Serrated treads provide a rugged look and help keep mud and snow from getting in your cab. Custom mounting kit included.

Installation Notes:

Drilling required for installation

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

These 6" wide, brite anodized aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

These custom-fit award-winning nerf bars feature a notched bar design. The step pads are wider than on competitors' nerf bars and their die-stamped design provides strong traction. Steel construction with a textured black finish.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Excludes Daytona, Rumble Bee and SRT-10 models

Excludes cab and chassis (regular cab)

Features:

Made of rust-resistant stainless steel, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. 5" step pads cover the bars to provide good traction.

Installation Notes:

No drilling required for installation

Tech Tip:

Most applications will not require drilling; however, some models may not have factory holes in the pinch weld and will require drilling two holes.

Features:

Each of these black powder coated stainless steel nerf bars features (2) 2" drop steps and an angular design for a rugged look. Removable stainless steel step plates are rustproof. Easy, no-drill installation. Mounting hardware included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these black powder coated steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you easily access both your truck cab and bed. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Designed for models with 8' bed only

Tube steps are installed by attaching mounting brackets to the rocker panel

Does not fit models with dual rear wheels

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Excludes Daytona, Rumble Bee and SRT-10 models

Excludes cab and chassis (regular cab)

Features:

The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these rust-resistant black powder coated steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

These 6" wide, brushed aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

Made of rust-resistant powder coated steel, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. Extra-wide step pads cover the oversize bars to provide good traction.

Installation Notes:

Drilling required for installation

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Black powder coated steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Features:

Made of rustproof black powder coated aluminum, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. 5" Wide step pads cover the bars to provide good traction.

Installation Notes:

No drilling required for installation

Tech Tip:

Most applications will not require drilling; however, some models may not have factory holes in the pinch weld and will require drilling two holes.

Features:

The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you access both your truck cab and bed quickly and easily. Footpad areas are recessed to prevent internal corrosion.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Tube steps are installed by attaching mounting brackets with the existing body mount bolts

Features:

Black powder coated stainless steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable stainless steel step plates are rustproof. Hardware is included.

Installation Notes:

Drilling required for installation

Designed for models with 8' bed only

Does not fit models with dual rear wheels

Features:

Black powder coated steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable steel step plates are rustproof. Hardware is included.

Installation Notes:

Drilling required for installation

Designed for models with 6-1/2' bed only

Features:

Made of rustproof stainless steel, these straight-style, custom-fit step bars have rugged square edges, and their mounting brackets are hidden for a seamless look. Extra-wide step pads cover the oversize bars to provide good traction.

Installation Notes:

Drilling required for installation

Features:

These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you easily access both your truck cab and bed. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Designed for models with 8' bed only

Tube steps are installed by attaching mounting brackets to the rocker panel

Does not fit models with dual rear wheels

Features:

Straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The 4" wide oval bars are made of polished stainless steel and have molded endcaps to keep out moisture. Custom, no-drill mounting kit included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these rustproof, polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Wheel-to-wheel, full-length tubes let you easily access both your truck cab and bed. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

Made of rust-resistant steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

Black powder coated stainless steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable stainless steel step plates are rustproof. Hardware is included.

Installation Notes:

Drilling required for installation

Designed for models with 6-1/2' bed only

Features:

Black powder coated steel nerf bars feature drop steps and an angular design for a rugged look. Wheel-to-wheel length allows easy truck bed access. Removable steel step plates are rustproof. Hardware is included.

Installation Notes:

Drilling required for installation

Designed for models with 8' bed only

Does not fit models with dual rear wheels

Features:

Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Features:

Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.

Installation Notes:

No drilling required for installation

Designed for models with 6-1/2' bed only

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

The curved ends on these polished stainless steel step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

These straight-style step bars with wide, top-mounted, non-slip pads give your vehicle a rugged look. The oval bars are made of rust-resistant black powder coated steel and have molded endcaps to keep out moisture. Custom mounting kit is included.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant powder coated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Excludes Daytona, Rumble Bee and SRT-10 models

Excludes cab and chassis (regular cab)

Features:

Made of rustproof stainless steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.

Installation Notes:

Drilling required for installation

Designed for models with 8' bed only

Does not fit models with dual rear wheels

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Excludes Daytona, Rumble Bee and SRT-10 models

Excludes cab and chassis (regular cab)

Features:

Straight-style, extra-wide step bars give your vehicle a rugged look. Polished stainless steel, oval tubes have molded plastic endcaps to keep out moisture. Oversize, 5" wide step pads provide sure footing. Custom mounting kit included.

Installation Notes:

No drilling required for installation

Features:

These 6" wide, black aluminum running boards sit close to your vehicle's frame for a streamlined look. The 1-piece, non-slip step pad on each board is made of soft, durable rubber, providing better grip than a molded step surface.

Installation Notes:

Drilling required for installation

Features:

Made of rust-resistant steel, these wheel-to-wheel, full-length step bars include a third step for easy truck bed access. 5" step pads provide good traction. Mounting brackets are hidden for a seamless look.

Installation Notes:

Drilling required for installation

Designed for models with 8' bed only

Does not fit models with dual rear wheels

Features:

The curved ends on these black powder coated step bars give your vehicle a streamlined look. Footpad areas are recessed, rather than cut out, preserving the strength of the steel and providing a solid, rustproof step into your truck.

Installation Notes:

No drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these powder coated steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

Go off-roading in style and easily step into your cab with these rugged running boards. Custom mounting kit offers simple installation and a from-the-factory look. Indented louvres provide ultimate traction. Matte black powder coat finish.

Installation Notes:

Drilling required for installation

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

The curved ends on these step bars give your vehicle a streamlined look. Made of rust-resistant chrome-plated steel, these 3" diameter round bars have recessed step areas that prevent internal corrosion. Non-slip step pads provide sure footing.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.

Installation Notes:

No drilling required for installation

Tube steps are installed by attaching mounting brackets to the rocker panel

Features:

The curved ends on these polished stainless steel steps give your vehicle a streamlined look. Fully enclosed ends prevent internal corrosion. Top-mounted, non-slip pads provide sure footing and rugged style.

Installation Notes:

No drilling required for installation