Filter By Toolbox Application
Vehicle Style: 8 Foot Bed
Truck Tool Box Specs:
Features:
70" Long x 14-1/2" tall x 20" deep; 8.4 cubic feet; 2" height above bed rails; standard box with foam filled lid and secure twist handles; aluminum construction. Includes removable BedRug liner.
More Information >Truck Tool Box Specs:
Features:
72" Long x 19-1/4" wide x 13-1/2" deep; 9 cubic feet; 4" height above bed rails; standard box with foam filled lid and paddle lift handles; aluminum construction
More Information >Truck Tool Box Specs:
Features:
72" Long x 19-1/4" wide x 13-1/2" deep; 9 cubic feet; 4" height above bed rails; standard box with foam filled lid and paddle lift handles; aluminum construction - black finish
More Information >Truck Tool Box Specs:
Features:
70" long x 15" tall x 20" deep; 8.6 cubic feet; 4" height above bed rails; standard box with foam filled lid and paddle lift handles; aluminum construction - black finish
More Information >Truck Tool Box Specs:
Features:
72" Long x 19-1/4" wide x 13-1/2" deep; 8.6 cubic feet; 2" height above bed rails; standard box with foam filled lid and secure twist handles; aluminum construction. Includes removable BedRug liner.
More Information >Truck Tool Box Specs:
Features:
69" Long x 19-1/4" wide x 13-1/2" deep; 8.6 cubic feet; 4" height above bed rails; standard box with foam filled lid and paddle lift handles; aluminum construction
More Information >Truck Tool Box Specs:
Features:
69" Long x 19-1/4" wide x 13-1/2" deep; 8.4 cubic feet; 2" height above bed rails; standard box with foam filled lid and secure twist handles; aluminum construction. Includes removable BedRug liner.
More Information >Truck Tool Box Specs:
Features:
72" Long x 19-1/4" wide x 13-1/2" deep; 8.6 cubic feet; 2" height above bed rails; standard box with foam filled lid and secure twist handles; aluminum construction. Includes removable BedRug liner.
More Information >Videos
for Truck Tool Box
Help Articles
for Truck Tool Box
Expert Answers
for Truck Tool Box
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy…
view full answer...Hey John, so the correct amount of spring bar tension will be based on the trailer's tongue weight and how it affects the suspension of your Nissan Frontier. Every WD system is a little…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a…
view full answer...Hi Eric; the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger #C52044 will work for your triple axle Kaufmann trailer. This is designed for 1 to 3 axle trailers with electric brakes so triple axle…
view full answer...I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…
view full answer...The UWS tool box part #UWS01039 that you referenced is made from 13 gauge aluminum which is .090 of an inch thick.
view full answer...The UWS A-Frame Trailer Toolbox #UWS01039 measures 18" wide on the outside so if you use the larger Ego batteries that give you the 18"…
view full answer...I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your…
view full answer...I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side…
view full answer...Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…
view full answer...