Tool Box

change make

Select Vehicle Model

  
Tool Box

Available Models for 2010 GMC Tool Box


Truck Toolbox

Truck Bed Toolboxes are available to fit all makes of trucks including Ford, Chevy, Dodge, GMC, Nissan, Toyota and Mitsubishi.

You can use our fitguide to ensure that your new toolbox will fit perfectly in your truck. We offer Saddle Mount, Side Rail, Bed Floor, Wheel Well (pork chop), Underbody and Transfer Tanks that will suit your tool storage needs and your budget.




Tool Box Manufacturers



Tool Boxes



You may also be interested in...



Accessories



2010 GMC Questions and Answers


  • What Are Measurements To Install Base Rails For Reese Fifth Wheel Hitch On A 2010 GMC Sierra
  • To install a fifth wheel hitch on your 2010 GMC Sierra 1500 with a 6-1/2 foot bed, you will need to use a fifth wheel hitch with a slider. The slider is used to eliminate clearance problems between the truck cab and the fifth wheel trailer on slow speed turns. The Reese 16K Fifth Wheel Hitch, # RP30047 you have referenced is a fixed hitch and will not give you the clearance you will need to tow a fifth wheel with a 6-1/2 foot bed. I would recommend the Reese 16K Fifth Wheel Trailer...
    view full answer...

  • Brake Controller Power Wire Not Receiving Power On 2010 GMC Sierra With All Fuses and Connections
  • It sounds like you still need to make a few connections under the hood of your 2010 GMC Sierra. You will need to locate 2 wires, both wires are red/black with eyelets on the end. One wire is located between the fuse box and driver side fender, the other should be located under the brake master cylinder. On the driver side, remove the fuse box cover, there will be 2 threaded studs that are different sizes, the wires which have different sized eyelets will connect to the corresponding studs...
    view full answer...

  • Can I Haul Fifth-Wheel or Gooseneck Trailer With 2010 GMC Sierra 1500 5.5 Ft. Short Bed 2WD Crew Cab
  • For a fifth wheel hitch, we do have applications for the 5.5 ft. bed of the 2010 GMC Sierra 1500, but use of a Sidewinder King Pin is required for clearance. A Sidewinder King Pin will move the pivot point of the trailer back 22 Inches which will give you additional clearance needed to make turns (see Sidewinder FAQ). Before buying a fifth wheel trailer, I would recommend using our Pin Box Conversion chart that shows all the fifth-wheel pin boxes that are compatible with Sidewinder King...
    view full answer...

  • Replacement Vinyl Portion for TruXedo Lo Pro Qt Tonneau Cover for 2010 GMC Sierra
  • Thank you for providing the details about your 2010 GMC Sierra's TruXedo Lo Pro tonneau cover. According to my contact at TruXedo the correct replacement vinyl cover for the Lo Pro QT tonneau cover system is part # TX1117930.
    view full answer...

  • Installing 12-Volt Accessory Trailer Power Feed Fuse in 2010 GMC Sierra
  • You will indeed need to install a 40 amp fuse in position 68 to activate stud 1 that powers the 12-volt accessory power circuit to the trailer connector. If there isn't already a wire connected to stud 1, you'll need to locate the red wire with the ring terminal located under the brake booster and attach it to stud 1.I've edited a photo for you showing where the wire is located, and I'll also link you to our FAQ article about installing a brake controller on your truck.
    view full answer...

  • How to Wire a 2010 GMC Yukon XL for a Brake Controller
  • Yes, you will need to connect two wires under the hood of your 2011 GMC Yukon XL to wire a brake controller to your vehicles brake controller circuitry. To attach those wires to your vehicle you will need a Zinc Plated Hex Flange Nut - M6, part # 185916, and a Zinc Plated Hex Flange Nut, part # 185917. I attached an FAQ article on how this is done below for you to check out, as well as the video that you watched of the brake controller being installed on a 2011 Chevy Silverado that you...
    view full answer...

  • Snow Chains Recommendation for a 2010 GMC Sierra With 275/55-20 Tires
  • My recommendation for limited use and the most economical snow chains for your 2010 GMC Sierra would be the Cable Snow Chains, # PW3029C. These chains are properly sized for wide base tires like your 275/55-20 tires and should be installed on the main drive wheels, in this case the rear. If your truck has 4 wheel drive then you could use another set on the front wheels, but it is not required. Rubber Adjusters, # PW99, are recommended for use with the Cable snow chains. They will help...
    view full answer...

  • Transmission Cooler # D13504 Routing Recommendation for a 2010 GMC Sierra 1500 4.8
  • You will want to install the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient, part # D13504, after the factory cooler. If you were to put the # D13504 before the factory cooler, you would actually be cooling the fluid and then reheating it once it went through factory cooler, making the # D13504 completely useless. The method for determining which line is the return line is to: 1. Start engine while engine is cold 2. Put your transmission...
    view full answer...

  • 2010 GMC Sierra 2500HD Transmission Cooler Recommendation
  • For your 2010 GMC pickup truck I would recommend that you get a Derale Transmission Cooler for the 2010 GMC Pickup, Sierra, part # D13105. The ideal transmission fluid temperature is from 160 to 200 degrees, 240 is way too hot and you should definitely upgrade your transmission cooler before you pull your trailer again. Otherwise, you may cause serious damage to your transmission. I recommended the # D13105 because it has a higher weight capacity than your trailer weighs and it should...
    view full answer...

  • Will the Derale 16-Pass Electra-Cool Remote Cooler Part # D15800 Fit a 2010 GMC Yukon XL
  • The Derale 16-Pass Electra-Cool Remote Cooler Assembly w/ Fan part # D15800 will physically fit on your 2010 GMC Yukon XL as long as you have 5-3/4" wide x 11-1/2 " tall x 5" deep of space to mount the cooler anywhere on the vehicle but the -8 AN x 1/2" diameter hose barb adapter fitting included in the kit will be overkill and will also not match up with the factory 3/8" diameter transmission fluid lines. According to Derale, your Yukon has 3/8" diameter transmission lines therefore,...
    view full answer...

  • Does Kodiak Offer a Disc Brake Kit with Actuator Like the Titan Brake Kit # T4843700
  • I can put together a brake kit for you that will be comparable to the Titan Disc Brake Kit and BrakeRite II SD Electric-Hydraulic Actuator, # T4843700. Kodiak does not have a brake kit with actuator available. This is most likely because they do not manufacture electric over hydraulic brake actuators. For a comparable kit, you will need the following: Kodiak Disc Brake Kit, # K2HR35D - Qty 2 Titan BrakeRite II Electric-Hydraulic Actuator Kit, # T4835700 - Qty 1 Titan Hydraulic...
    view full answer...

  • How To Install Replacement Trunnion Latch Pins # 58025 on Older Reese Weight Distribution Head
  • If you have an older style Trunnion weight distribution head then the Replacement Trunnion Latch Pins for Reese Standard Trunnion Style Weight Distribution, part # 58025, is the correct item. Newer style weight distribution systems with trunnion bars, like the ones in the Pro Series Trunnion Style Weight Distribution Kit, part # 49586, do not use latch pins, they use a twist lock design where the trunnion bar is inserted from the side and twisted to the towing and hookup position. I...
    view full answer...

  • Availability of Motorcycle Carrier to Carry a Kawasaki KLR650 on a 2010 Toyota Hilux 3L
  • The Rage PowerSport Steel Motorcycle Carrier, part # MX600, will carry a motorcycle not exceeding 600 lbs. It needs to be installed in a Class III or higher 2 inch hitch with at least a 500-lb tongue weight capacity. The track length is 76-3/4 inches and can hold up to 5-1/2 inch wide tires. I am including a link to a video review of the Rage carrier. After doing some research on your Kawasaki KLR650 I found out the weight of the bike is 402 lbs. The front tire is 3.5 inches wide and...
    view full answer...

  • Does the Roadmaster Sterling All Terrain Tow Bar # RM-576 Include the Vehicle Specific Base Plates
  • The Roadmaster Sterling All Terrain Tow Bar, part # RM-576, will include the safety cables, electrical wiring, and the quick disconnects. The base plates are not included with the Sterling tow bar and are vehicle specific, so they would have to be ordered separately for your 2010 GMC Canyon. I am including a link to the instructions on the Sterling tow bar and a link to a video review of the tow bar. For your 2010 GMC Canyon I would recommend the Roadmaster XL Base Plate Kit, part #...
    view full answer...

  • Demco Hijacker Fifth Wheel Hitch or Reese Elite Slider Recommendation for 2010 GMC Sierra Short Bed
  • I have a great solution for you. Since you are looking for an under-bed rail system that will leave your truck bed empty when the hitch is removed I would recommend you go with the Demco Hijacker hitch part # DM8550022 and underbed rail kit part # DM8551004. Since you have a short bed you will need a hitch that has a slider so that you can have enough clearance to make tight turns. The Reese Elite Slider hitch part # RP30144 and Rail Kit part # RP30061 is a GREAT option, but this setup...
    view full answer...

  • What is Needed to Install Prodigy 3 Brake Controller on 2010 GMC Sierra?
  • Your 2010 GMC Sierra already has wires under the dash, but since you are getting the Prodigy P3 # 90195, which has a quick disconnect feature, you will need adapter # 7894. I have added links to videos for you to take a look at, as well as a pair of help articles on installing a brake controller in GM vehicles which may be useful.
    view full answer...

  • Recommend a Combination Oil and Transmission Cooler For 2010 GMC Yukon XL Denali
  • If you are looking for a combination engine oil and transmission cooler I would recommend the item you selected, Derale Electra-Cool Combo Engine and Transmission Cooler, part # D15902. I contacted our representative at Derale and he informed me that the fittings to hook up to oil line will fit your 2010 Yukon XL Denali. You will want to measure to make sure that there is room to mount part # D15902 in front of your vehicle. The best place for maximum cooling efficiency would be...
    view full answer...

  • Could a TracRac Ladder Rack Be Used with a Rooftop Tent
  • The rooftop tents you referred to are tents that basically attach to the roof rack of a vehicle. The crossbars of the T-Rac Pro2 Truck Bed Ladder Rack # TA37002 that you referenced have a 1,000 lb capacity and would easily handle the weight of a tent better than a standard roof rack. The only issue I can think of would be that the spacing of the bars on this might be too far apart for your tent since the bars of the ladder rack are designed to be at the front and back of the bed of a...
    view full answer...

  • How Many Derale Snap-In Radiator Adapter Fitting for GM, # D13035 are Needed on a 2010 GMC Canyon
  • To install a Derale transmission cooler on your 2010 GMC Canyon you will need one of the Derale Snap-In Radiator Adapter Fitting for GM, # D13035. This will snap into the factory transmission coolers output fitting to allow you to run the coolant line from it without having to cut or flare the original fitting on the factory cooler. When installing a transmission cooler on your vehicle you will want to measure the area in front of your radiator to find out what size cooler will fit....
    view full answer...

  • Where Do I Run the Wiring for BrakeRite II SD Electric-Hydraulic Actuator in Titan Disc Brake Kit
  • The only hardwire connection that will need to be made for the Titan BrakeRite II Severe-Duty Electric-Hydraulic Actuator in the Titan Disc Brake Kit, # T4835700, is to a 12 volt DC battery with a minimum rating of 10 amp hours. All of the other components in the system use plug-in connections and connect to each other. I am including a diagram that shows how this system is set up. This system will not have any affect on your trailer's wiring set-up or junction box.
    view full answer...

  • Is RoadMaster Stop Light Switch Kit # RM-751220 Required for GM Trucks with Adjustable Pedals
  • The RoadMaster Stop Light Switch Kit, # RM-751220, that you have referenced for GM trucks and SUVs that have adjustable pedals is required in order for the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400, to work.
    view full answer...

  • Is all the Installation Hardware Included with the Reese 20K Fifth Wheel Hitch RP30083
  • The Reese 20K Fifth Wheel with Slider, part # RP30083, is just the hitch. Since installation kits are specific to vehicles, they are sold separately. For a 2010 GMC Sierra 2500 with 6 foot bed, you use part # RP50064-58 as your install kit. It includes custom fit brackets that bolt through and around the truck frame, as well as the rails that sit in the truck bed for the hitch to attach to. If you order part # 30083 and part # 50064-58 you will have everything you need to install...
    view full answer...

  • Are Universal 5th Wheel Trailer Hitch Installation Brackets Compatible Rails that Run Front to Back
  • The Reese L-shaped brackets are not compatible with the Husky installation kit you have. The # RP30035 brackets are designed for rails that run side to side in the bed. It is not a good idea to mix underbed bracket and rail manufacturers as a rule because they have not been tested together. You will either need to get a compatible installation kit for the hitch and rails or a new fifth wheel trailer hitch and installation kit that are all compatible for your 2010 GMC Sierra. I recommend...
    view full answer...

  • Where Do Block Heaters Install on a 2010 GMC Terrain and 2011 GMC Sierra 2500
  • Kat's heater # KH11811 for a 2010 GMC Terrain with 3.0 liter motor installs in the block hole located at the right rear of the motor. For the 2011 GMC Sierra 2500 it is going to depend on which motor is in it. If it is the 8.1 generation 3 or 4 motor then a heater will install either at the left rear or left front of the motor. The 6.6 liter - right front The 6.2 liter - left rear or left front The 6.0 liter - left rear or left front The 5.3 liter - left rear or left front
    view full answer...

  • Dexter Electric Over Hydraulic Actuator Not Compatible w/Integrated Brake Control, 2010 GMC Sierra
  • The Dexter electric over hydraulic actuator does not have its own adapter for use with the integrated controller on your truck. Titan BrakeRite EHB Adapter for Ford/Chevy Integral Brake Controllers, part # T4846000, will only work with the Titan BrakeRite EHB. You will need to install an aftermarket brake controller like the P2, # 90885, which is compatible with electric over hydraulic braking systems. To install a new controller on the truck, you will need to access the tow package...
    view full answer...

  • Can a Front Mount Trailer Hitch be Used for a Bike Rack on a 2010 GMC Sierra 2500HD
  • It is possible to use a bike rack on a front mount trailer hitch like # 31109. There can be some issues though. First, it will hinder driver visibility. You just will not be able to see as much of the road. Second, the bikes may block the head lights or other indicating lamps on the truck which could be dangerous. And third, the bikes could restrict airflow and cause the truck to run hot. If you cannot put the bikes in the rear because you are towing a trailer, you may be able to use...
    view full answer...

  • Pickup Truck for Towing Grand Design 5th Wheel with 8500-lb Dry Weight
  • Generally we recommend 3/4-ton long bed trucks for 5th wheel towing. Although the 2007 - 2013 Sierras with 6.2L V8 have 400+ horsepower (enough power for your trailer's weight) the short bed makes maneuvering the 5th wheel a challenge since you have reduced turning clearance. Short bed trucks CAN be used for 5th wheels by using a slider hitch or better still a Sidewinder. A Sidewinder replacement pin box extends the pivot point rearward from the hitch by 22-inches, almost double the additional...
    view full answer...

  • Will Firestone Ride-Rite Air Helper Springs Fit 2010 GMC Sierra Truck With Reese 5th Wheel Hitch
  • The item you selected, Firestone Ride-Rite Air Helper Springs, part # F2250 will fit the 2010 GMC Sierra 2500 and 3500 models. If you have the 2500 or 3500 model, part # F2250 will fit your 2010 GMC Sierra and will not interfere with your Reese 16K Fifth-Wheel Hitch. If you have a 1500 model 2010 GMC Sierra, then you will need the Firestone Ride-Rite Air Helper Springs, part # F2430, and it will not interfere with your Reese 16K Fifth-Wheel Hitch. Another part you may want to consider...
    view full answer...

  • How Does the Dutton-Lainson Electrical Quick Connect # DL24086 Wire Up
  • I attached a picture of the installation instruction page from the Dutton-Lainson Electrical Quick Connect # DL24086 that you referenced. It looks like you will need to cut the wires and strip the wires back 1/2 of an inch. Next you will need to put the wires into the contacts and then solder the wires into the contacts. Do not crimp the wires, these connectors are for soldering. Once the solder joints have cooled push the wire and contact assemblies into the housings with the lips...
    view full answer...

  • Can a Ranch Hitch Offset 5th Wheel to Gooseneck Adapter be Used on a 2010 GMC 1500 Crew Cab
  • You can use the Ranch Hitch Fifth-Wheel-to-Gooseneck Coupler Adapter with 8 Inch Offset, # AM3139, to tow your fifth wheel trailer with your 2010 GMC 1500 Short Bed. This coupler adapter will provide additional clearance when turning than what you would have with a coupler adapter without an offset, however, it is not designed to prevent contact between your truck cab and trailer when making a 90 degree turn. If you are looking for a product that will allow you to safely execute a 90...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.