Vehicle Style: 5 Foot Bed Change
Fold-Up - Hard Cover Specs:
Features:
Folding tonneau cover protects your truck bed and secures your cargo. Folds flat to provide open truck bed access. Clamp-on installation. Cover sits 1" above bed rails.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Fold-Up - Soft Cover Specs:
Features:
Easy in, easy on - this EZ Fold truck-bed cover clamps onto your side rails in minutes, and it folds up in seconds to allow access to your cargo. The low-profile cover also looks sharp, and it stores behind the cab when not in use.
More Information >Fold-Up - Hard Cover Specs:
Features:
Tri-fold tonneau cover folds up to provide two-thirds or full truck bed access. Prop rods keep cover from coming in contact with cab. Cover sits 1-1/4" above bed rails. Shuts with the tailgate open or closed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Roll-Up - Soft Cover Specs:
Features:
Soft tonneau cover protects your truck bed and cargo from the elements. Rolls up for full truck bed access. Durable, matte black polyester and vinyl provides a clean look. Manual tension control helps to maintain a tight fit.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Manual Cover Specs:
Features:
...the elements Angled design allows for maximum useable cargo space in bed Low-profile cover sits 1" above the bed rails for a streamlined look Aerodynamic style reduces wind drag and helps to improve gas...
More Information >Retractable - Manual Cover Specs:
Features:
...to the flush-mounted locking handle, the sleek frame features a top panel that overlaps the bulkhead of the truck and storage canister, eliminating the gap in between. The low-profile side rails mount just 1" above...
More Information >Roll-Up - Soft Cover Specs:
Features:
The Vanish tonneau delivers a sleek, ultra-low profile and great features at an economical price. It sits only 1/2" above the bed, inside your vehicle's rails. XT-Dial offers quick tension adjustment, and a trigger latch secures the cover.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Roll-Up - Soft Cover Specs:
Features:
...Snap-in header guide allows for easy tonneau installation and removal Quick-attach clamps secure tonneau rails to inside of your vehicle's truck-bed rails 20-Minute installation - all...
Installation Notes:
Tonneau intended for vehicles with a Sport Bar installed
More Information >Roll-Up - Soft Cover Specs:
Features:
TonnoSport is the most affordable Access roll-up tonneau, and it has tons of great features: EZ-Dials for cover tension adjustment, a trigger latch to secure the cover, and a quick clip storage strap to tie it down. Sits 1/2" above the bed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Roll-Up - Soft Cover Specs:
Features:
Soft tonneau cover keeps your vehicle's bed and cargo safe and dry. Roll up and remove for full truck bed access. Flush-mount and durable, matte black polyester and vinyl skin for a clean look. Automatic tension control maintains a tight fit.
More Information >Fold-Up - Soft Cover Specs:
Features:
Outfit your vehicle with the Deuce 2 tonneau cover and enjoy dual functionality and dual accessibility. This one-of-a-kind vinyl cover folds back 30" to allow easy access to the front of your truck bed - or rolls up and stores behind the cab.
More Information >Retractable - Manual Cover Specs:
Features:
...that gets inside canister Side rails sit 1" above truck bed for a low-profile look Superior protection for your cargo 5/8" Thick metal I-beams embedded every 4-3/4" for impact resistance...
More Information >Fold-Up - Hard Cover Specs:
Features:
...The low-profile cover sits approximately 1/2" above your truck bed rails for an overall streamlined appearance. This aerodynamic design - when paired with a covered truck bed - also reduces wind noise and drag...
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Fold-Up - Hard Cover Specs:
Features:
...with retractable straps keep folded panels secured Folded panels can be easily removed without tools for full bed access Low-profile cover sits approximately 1/2" above the bed rails for a streamlined look...
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Fold-Up - Soft Cover Specs:
Features:
Soft tonneau folds up from the tailgate to provide two-thirds truck bed access. Cover sits 1-1/2" above your vehicle's bed rails. It can be shut with the tailgate open or closed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Roll-Up - Soft Cover Specs:
Features:
Soft tonneau rolls up to provide full truck bed access. Tension-free pinch levers prevent cover from popping up when you unlatch it. Self-tensioning frame with support beams keeps cover taut when closed.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Manual Cover Specs:
Features:
...the elements Angled design allows for maximum useable cargo space in bed Low-profile cover sits 1" above the bed rails for a streamlined look Aerodynamic style reduces wind drag and helps to improve gas...
More Information >Fold-Up - Hard Cover Specs:
Features:
This hard tonneau cover folds up toward your cab for full access to your truck bed. It secures to your cab with latches, making it safe for highway driving. Extruded aluminum panels withstand impact from hail and other falling objects.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Manual Cover Specs:
Features:
...that gets inside canister Side rails sit 1" above truck bed for a low-profile look Superior protection for your cargo Weather stripping and foam seals on all sides keep moisture, snow, and dust out...
More Information >Fold-Up - Hard Cover Specs:
Features:
...The low-profile cover sits approximately 1/2" above your truck bed rails for an overall streamlined appearance. This aerodynamic design - when paired with a covered truck bed - also reduces wind noise and drag...
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Manual Cover Specs:
Features:
Retractable tonneau cover with T-track rails lets you add a truck bed rack for carrying additional gear. It has a 450 lb load capacity so you can use it to hold equipment or even stand on it. Impenetrable aluminum slats keep cargo safe.
More Information >Retractable - Powered Cover Specs:
Features:
...up less space in your bed, leaving more room for cargo 2 Drain tubes included to let out any water that gets inside canister Side rails sit 1" above truck bed for a low-profile look Superior...
More Information >Retractable - Powered Cover Specs:
Features:
...canister, eliminating the gap in between. The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches...
More Information >Fold-Up - Hard Cover Specs:
Features:
This hard tonneau cover folds up toward your cab for full access to your truck bed. It secures to your cab with latches, making it safe for highway driving. Extruded aluminum panels withstand impact from hail and other falling objects.
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Powered Cover Specs:
Features:
...fobs included Compact canister protects retracted cover from the elements Angled design allows for maximum useable cargo space in bed Low-profile cover sits 1" above the bed rails for a streamlined...
More Information >Retractable - Powered Cover Specs:
Features:
...in between. The low-profile side rails mount just 1" above your truck bed, which offers a sleek look while still providing enough clearance for most 5th-wheel hitches to remain installed beneath the cover...
More Information >Retractable - Powered Cover Specs:
Features:
...up less space in your bed, leaving more room for cargo 2 Drain tubes included to let out any water that gets inside canister Side rails sit 1" above truck bed for a low-profile look Superior...
More Information >Roll-Up - Soft Cover Specs:
Features:
...Snap-in header guide allows for easy tonneau installation and removal Quick-attach clamps secure tonneau rails to inside of your vehicle's truck-bed rails 20-Minute installation - all...
More Information >Fold-Up - Hard Cover Specs:
Features:
...The low-profile cover sits approximately 1/2" above your truck bed rails for an overall streamlined appearance. This aerodynamic design - when paired with a covered truck bed - also reduces wind noise and drag...
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Retractable - Manual Cover Specs:
Features:
...for a low-profile look Superior protection for your cargo Weather stripping and foam seals on all sides keep moisture, snow, and dust out of bed Cover overlaps top of tailgate to prevent water from leaking inside...
More Information >Fold-Up - Hard Cover Specs:
Features:
...operating the tonneau. Sleek, Low-Profile Design The low-profile cover sits approximately 1/2" above your truck bed rails for an overall streamlined appearance. This aerodynamic design - when paired...
Installation Notes:
Clamp-on style rail system requires no drilling for installation
More Information >Videos
for Tonneau Cover
Help Articles
for Tonneau Cover
Expert Answers
for Tonneau Cover
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced…
view full answer...A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will…
view full answer...Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over the tire. I'd rather have one…
view full answer...Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center…
view full answer...I trust regular axles with leaf spring suspension more than torsion axles only because I can see what is going on with the suspension and can fix any issues should they arise. With a torsion axle though there really isn't any…
view full answer...Yep, you're exactly right; the distance from the center of the hitch pin hole to the welded gusset is indeed four inches on the Curt Ball Mount for 2" Hitches #C45112. So if that's the amount you need…
view full answer...The biggest difference between the Tow Ready Tail Light Isolating Diode System #TR118821 and the Roadmaster Universal Hy-Power Diode Wiring Kit #RM-154 is that Tow Ready created their wiring kit with quick disconnects so if you ever get a new…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...