2017 Mercedes-Benz Vehicle Air Mattress

Change Make

Select Vehicle Model

--Select Model-- B-Class C-Class CLA-Class CLS-Class E-Class G-Class GLA-Class GLC-Class GLE-Class GLS-Class Metris Sprinter 2500 Sprinter 3500

   Go

Available Models for 2017 Mercedes-Benz Vehicle Air Mattress

B-Class

C-Class

CLA-Class

CLS-Class

E-Class

G-Class

GLA-Class

GLC-Class

GLE-Class

GLS-Class

Metris

Sprinter 2500

Sprinter 3500

2017 Mercedes-Benz Accessories

Towing

2017 Mercedes-Benz Trailer Hitch

2017 Mercedes-Benz Trailer Wiring

2017 Mercedes-Benz Brake Controller

2017 Mercedes-Benz Front Mount Hitch

2017 Mercedes-Benz Base Plate for Tow Bar

2017 Mercedes-Benz Vehicle Tow Bar Brake System

2017 Mercedes-Benz Vehicle Tow Bar Wiring

Cargo Control

2017 Mercedes-Benz Roof Rack

2017 Mercedes-Benz Ladder Rack

2017 Mercedes-Benz Trunk Bike Rack

Performance Accessories

2017 Mercedes-Benz Air Filter

2017 Mercedes-Benz Exhaust

2017 Mercedes-Benz Suspension Enhancement

2017 Mercedes-Benz Performance Chip Tuners

2017 Mercedes-Benz Tire Chains

2017 Mercedes-Benz Fluid Filters

2017 Mercedes-Benz Vehicle Sway Bars

2017 Mercedes-Benz Cabin Air Filter

Vehicle Trim

2017 Mercedes-Benz Floor Mats

2017 Mercedes-Benz Nerf Bars - Running Boards

2017 Mercedes-Benz Vehicle Covers

2017 Mercedes-Benz Grille Guard

2017 Mercedes-Benz Side Window Vents

2017 Mercedes-Benz Mud Flaps

2017 Mercedes-Benz Lamp Guards

2017 Mercedes-Benz Van Cargo Mat

2017 Mercedes-Benz Vehicle Tent

2017 Mercedes-Benz Vehicle Seat Covers

2017 Mercedes-Benz Windshield Wiper Blades

2017 Mercedes-Benz Windshield Covers

2017 Mercedes-Benz Vehicle Air Mattress

Jeep Accessories

2017 Mercedes-Benz Jeep Spare Tire Carriers

2017 Mercedes-Benz Questions and Answers

• Parts Needed to Equip 2017 Mercedes-Benz Sprinter 2500 with 7-Way and Trailer Brake Controller
  
• We have 2-inch Class III trailer hitches for your 2017 Sprinter 2500 that you can view on the linked page. Their fits depend on the van wheelbase and bumper style. You can use the drop-down Select Vehicle Style menu tool to choose your specific configuration. Please note that Sprinter frames that measure 30-3/8-inches between the outsides of the frame rails have no confirmed hitch options. Towing capacities vary slightly among the hitches available; for a van without the factory step...
  view full answer...


• Parts Needed to Wire Brake Controller to 2017 Mercedes Benz Sprinter with Green Connector
  
• Since you have brake controller pre-wiring already on your 2017 Mercedes Sprinter 3500 you would not need to use a stop light switch like part # RM-751475. We don't sell a connector that plugs right into it, but you can still use it to wire up a brake controller like the P3 part # 90195. You'll need to cut the connector off and then wire the vehicle wiring to the controller's wiring. On the controller the blue wire is the brake output circuit which runs to the 7-way of the vehicle,...
  view full answer...


• Recommended Wiring and Brake Controller for 2017 Sprinter 3500 Dually with 170 Inch Wheel Base
  
• The 2017 Mercedes-Benz Sprinter 3500 dually 170 wheel base will require a few items to install a brake controller. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 for a brake controller that will give you the proportional braking to keep your trailer brake timing and intensity in line with your vehicle. To wire this, you will first need a 4-way connection. If you don't have one, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #...
  view full answer...


• 7-Way Trailer Connector for a 2017 Mercedes-Benz Sprinter 2500
  
• In order to install a 7-way trailer connector on the rear of your 2017 Mercedes-Benz Sprinter 2500 you will need to use the T-One Vehicle Wiring Harness part # 118649 with the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. Unfortunately, they do not make a wiring harness that splices into the taillights and give you a 7-way trailer connector therefore this will be your only option. If you will be towing a trailer with brakes then you will still need to use part # 118649 but instead...
  view full answer...


• How to Carry Both a Bike Rack and Cargo Carrier on a 2017 Mercedes-Benz Sprinter 3500
  
• There is a solution that will allow you to carry both a bike rack and cargo cargo on the rear of your 2017 Mercedes-Benz Sprinter 3500 at the same time and for this you will need to use the Hollywood Racks Sport Rider SE2 Platform Bike Rack w/ Cargo Carrier part # HR1450Z-85 which is the only one of it's kind to my knowledge. The Sport Rider is one of my favorite bike racks because it is very well made and has add-ons you can purchase to make it compatible with practically any bike. It...
  view full answer...


• Trailer Brake Controller Installation in 2017 Mercedes-Benz Sprinter 2500
  
• There is no plug-and-play brake controller harness for the 2017 Mercedes-Benz Sprinter 2500 so brake controller installation will be a hard-wire process. Under the driver's seat there should be a green plug. The wires to this plug can be tested with a circuit tester like # ALL640595 to confirm their function since vehicle wire colors are not always consistent. A brake controller like the Prodigy P2 # 90885 has 4 wires that require connection to the Sprinter. The black wire is...
  view full answer...


• Brake Controller Port Location on a 2017 Mercedes-Benz Sprinter 2500
  
• According to my research, if your 2017 Mercedes-Benz Sprinter 2500 came with a factory 7-way trailer connector then you will have the brake controller connector pre-wired. This pre-wired connector should be under the driver side seat which you can see in the attached photo. The connector is green with four pins inside. Once you locate this connector you can then install the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 using the Tekonsha Custom Wiring Adapter for Trailer...
  view full answer...


• Recommended Trailer Hitch Between Curt 13358 And The Draw-Tite 75601 Mercedes-Benz Sprinter 2500
  
• Both the Curt hitch # 13358 and Draw-Tite hitch # 75601 will fit your 2016 Mercedes Sprinter 2500 if you have the 170 inch wheel base and factory step bumper. Its almost a dead heat between the two, but I'm giving the edge to # 13358. The # 13358 has more positive reviews about this product and it is made is the USA. It also step-by-step install videos for you to watch on an earlier model of the Mercedes-Benz Sprinter. Both hitches are Class III hitches with 2 inch receivers and...
  view full answer...


• Windshield Cover Confirmed to Fit a 2017 Class C Winnebago View
  
• I confirmed with Adco that both windshield covers, # 290-2523 and # 290-2423 will fit your 2017 Mercedes-Benz Sprinter. The Deluxe # 290-2523 has the privacy screens so you can see out while others cannot see in. The standard cover without the privacy screens, # 290-2423, is made of the same material and is the same otherwise. Right now they're only available in white.
  view full answer...


• Recommended 5.30-12 Tires With Load Rating Of D
  
• Moving up a higher load range will not only increase your load capacity, but will also increase the sidewall ply strength, so you will be less likely to have a blow out. I recommend the Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range D # AM30859 for your application or the galvanized wheel # AM30861. These combinations use the same tire which is rated for 1,250 lb capacity at 105 psi. You want to always run trailer tires at their max psi when inflated while...
  view full answer...


• Recommended Trailer Hitch for a 2019 Mercedes Benz GLC300 SUV for Kuat Sherpa 2.0 Bike Rack
  
• Based on my research the changes to the 2019 model of Mercedes Benz GLC300 from the previous model years do not impact the frame and hitch fit. Although the manufacturers have yet to confirm a fit because they haven't yet tested that model year, the research shows it should fit without any issue. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13290 because it will allow 1-1/2 inches more bumper clearance than the Draw-Tite # 76082. The Kuat Sherpa 2.0...
  view full answer...


• Choosing Between Ultra-Fab Skid Wheels UF48-979017 and UF48-979014
  
• If it were me I would go with Ultra-Fab Rotating, Hitch Mounted Skid Wheels for RVs up to 30' Long - 4" Diameter - Qty 2 Item # UF48-979014 because the wheels can swivel. On Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing - 3" Diameter - Qty 2 Item # UF48-979017 the wheels are fixed. Having wheels that can swivel means they are more effective if you are not traveling in a straight line!
  view full answer...


• Which Hitch for 2017 Mercedes Benz GLC 300 is Most Hidden Curt or Draw Tite
  
• Height-wise the Draw Tite # 76082 and the Curt # C13290 are going to be right at the same dimension but where they differ more significantly is the how far each hitch is recessed under the bumper. The Curt will be recessed right at 1-1/2 inches more than the Draw Tite so I believe that makes it your better option. I attached a picture that shows what this hitch looks like installed on a similar GLC as yours for you to check out as well.
  view full answer...


• 2017 Mercedes GLE 350 Install Instructions for Draw Tite and Curt Trailer Hitch
  
• For your 2017 Mercedes Benz GLE 350 we have the Draw Tite hitch part # 76141 which you referenced and the Curt # C13294. If you scroll down you can see the install instructions for both. Removal of bumper fascia brackets required; fascia will be secured to hitch body. BlueTEC models - DEF tank shield will be removed and reattached after trimming. DEF tank needs to be lowered and supported while installing hitch.
  view full answer...


• Which Curt Trailer Hitch Fits 2017 Mercedes Sprinter 2500 with 170 inch Wheelbase
  
• Curt does have a trailer hitch that fits your 2017 Mercedes Benz Sprinter 2500 with a 170 inch wheelbase as the part # 13358 for if you have the factory step bumper or the part # C13388 for if you have the standard bumper, but the part # 13275 you referenced is for older versions of the Sprinter so it is not the correct hitch.
  view full answer...


• Rear Anti-Sway Bar from Roadmaster for a 2017 Mercedes-Benz 2500
  
• For an Anti-Sway bar from Roadmaster that is a confirmed fit for your 2017 Mercedes-Benz Sprinter 2500 you will need part # RM-1209-128. Keep in mind that this is an upgrade to a pre-existing OEM anti-sway bar so if none is present you will also need to install part # RM-1209-128.
  view full answer...


• How Can the Roadmaster Hitch Mounted Spare Tire Carrier Be Secured to Deter Theft?
  
• The Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening - 2" Hitches # RM-195225 can be secured with a hitch lock like the B&W Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-3/4" Span - Stainless Steel # BWTS51234. Then you can use a spare tire lock like the MasterLock # 262DAT or Dead Bolt lock # 4324.
  view full answer...


• Connecting a Brake Controller Red Wire on a 2017 Mercedes Sprinter 2500
  
• Your 2017 Mercedes Sprinter 2500 may actually have brake controller port or wiring harness that you can use to install a brake controller. I have included a link to a video that may help. It is on a slightly older Sprinter but can be used as a guide. The 2006 to 2018 are part of the same generation. If the van has a third brake light (CHMSL: center high mount stop lamp) and it is the only thing on that fuse you could use it to attach to the red brake controller wire. The white ground...
  view full answer...


• Parts Needed to Install Tekonsha Prodigy P3 Brake Controller on 2017 Mercedes-Benz Sprinter 3500
  
• We have everything you need to install the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 (great choice) on your 2017 Mercedes-Benz Sprinter 3500, however there is not currently a plug-in adapter available for this vehicle. If there is already a factory installed 7-way connector on your Sprinter, you will just need to install the Roadmaster Stop Light Switch Kit # RM-751475 along with the Universal Installation Wiring # 5506. This wiring kit includes the duplex wire and circuit...
  view full answer...


• Is Vehicle Frame Modification Needed for Installing Curt Hitch part # C13190
  
• I attached a link to the install instructions for the Curt hitch part # C13190 that you referenced. There is not frame drilling or modification but there is some heat shield modification required.
  view full answer...


• Trailer Hitch Fit Recommendation for 2017 Mercedes Sprinter 2500
  
• For your 2017 Mercedes Benz Spinter 2500 with the factory step bumper we have the Curt hitch part # 13358 which is a confirmed fit for the long and short wheelbase models so it will fit and work well for you. The part # C13388 fits the versions of the vehicle without the factory step bumper. These hitches have plenty of towing capacity and come with limited lifetime warranties so we recommend them highly.
  view full answer...


• Trailer Wiring Harness Options for a 2017 Mercedes-Benz Metris
  
• The only trailer wiring harness we have for your 2017 Mercedes-Benz Metris that will not require you to cut or splice any of the factory wires is with the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole part # 119250KIT. This harness uses sensors that clamp around the signal wires in your tail light housing. If you are looking for a more cost effective wiring harness, I recommend the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness part # 119190KIT though you...
  view full answer...


• Confirmed Trailer Hitch Fit for a 2017 Mercedes Benz GLS450
  
• Yes, the Curt hitch part # C13190 has been confirmed as a fit for your 2017 Mercedes Benz GLS450. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise or drop to tow the...
  view full answer...


• How Much Height Drop with Carr Custom-Fit Side Steps CARR105771
  
• Carr Custom-Fit Side Steps # CARR105771 are confirmed to fit your 2017 Mercedes-Benz Sprinter 3500 and they have a height drop of 5-inches from the mounting point on the rocker panels. The linked video will show you an example installation. The mounting hardware is included with these USA-made steps.
  view full answer...


• Will Roadmaster Skid Wheel # RM-050 Prevent Scraping When Carrying Bike Rack
  
• Yes, the Roadmaster Rollaway Skid Wheel part # RM-050 will fit the Curt hitch you have installed part # 13358. To determine where the roller will be relative to the hitch height you'd need to measure 3-1/4 inches down from the hitch pin hole. Comparing that dimension to your current setup will allow you to know if you'd have enough clearance.
  view full answer...


• Konig Tire Chains to Fit 235/50R18 Tires on 2019 Mercedes-Benz GLA 250 4-Matic
  
• All tire chains fit multiple tire sizes. The Konig Low-Pro chains # TH04115103 that you referenced fit several sizes but they do not fit your 235/50R18 tires. Chains that do fit your tire size appear on the linked page. These are all low-profile S-Class chains that feature automatic tension control for the most secure installation on your 235/50R18 tires. The compatible Konig chains most similar to those you looked at are their K-Summit chains # TH02230K45. These are premium-quality...
  view full answer...


• Will Curt Echo Wireless Brake Controller Work When Getting a Call
  
• You can receive a call or open another app on your phone and the Curt Echo Mobile Trailer Brake Controller # C51180 and it will still work. When you get a call the Echo app will still be open in the background and if you want to open up another app just keep the Echo app open in the background - simply minimize it - and you will retain the complete functionality of the brake controller. It should be noted that even if you lose connectivity between the Echo # C51180 and the app for...
  view full answer...


• Platform Bike Rarck Recommendation for Rear of Winnebago View 24G
  
• We have a few bike racks that are rated for use behind a motorhome like your Winnebago View 24G but the RockyMounts you mentioned is not one of them. Instead we have the Swagman Dispatch part # S64684 which is similar and is rated for RV use so it would be your best option. I attached a review video as well. This mounts in a hitch at the rear of the vehicle though so it should not interfere with a slide out.
  view full answer...


• Recommended Trailer Hitch for 2017 Mercedes Sprinter 2500 With Factory Step Bumper
  
• For your 2017 Mercedes-Benz Sprinter 2500 with a 170" wheelbase and factory step bumper I recommend Curt hitch # 13358. This hitch has a 2" receiver and is a complete bolt-on installation so no drilling in your Mercedes' frame is going to be required for installation; it is a Class III hitch with a 5,000 lb towing capacity and 500 lb tongue weight capacity. The only thing to keep in mind is that this hitch will not fit if your Sprinter has a 30-3/8" frame. I've linked an install video of...
  view full answer...


• Using the Kuat Pivot on a 2017 Mercedes-Benz Sprinter 2500 with a Step Bumper
  
• You will need to take a quick measurement to make sure that the Kuat Pivot, part # PV20B will clear your step bumper. Simply measure from the center of the hitch pin hole to the furthest point of the step bumper away from the hitch. This will give you your required clearance in order to be able to use the Kuat Pivot. The Kuat Pivot has a minimum clearance of 4-3/4 inches to its nearest part, and your minimum clearance will need to be less than this to be able to use the Kuat Pivot.
  view full answer...