2021 Ram 3500 Cab and Chassis - 4 Wheel Drive Suspension Enhancement

Features:

2,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to reduce sway and prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Product is designed for vehicles with approximately 3 inch wide springs

Features:

8,000-lb Capacity hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. Provides a comfortable ride by absorbing road shock and improving stability. Ideal for trucks with slide-in campers or an in-bed salt spreader.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

This is a Severe Service kit and should only be used on vehicles with a slide-in camper, salt spreader, or those with a mounted crane or other aerial device, such as on a tow truck.

Features:

5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.

Installation Notes:

Drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Tech Tip:

Distance from the outside of the frame to the inside of the tire must be at least 8"

Features:

8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Product does not fit vehicles with factory Air Suspension system

Features:

2,800-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

Features:

4,437-lb Capacity. Upgrade your vehicle's front suspension with SuperCoils. They replace your factory coil springs to improve your suspension and reduce sag. Great for snowplows and trucks with beefy bumpers. Increases ride height by 2".

Installation Notes:

No drilling required for installation

Designed for vehicles with Diesel Engine only

Product will add approximately 2" of lift to suspension

Features:

800-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

Features:

1,500-lb Capacity. Upgrade your vehicle's rear suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

Features:

2,300-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Application includes models with dual rear wheels

Features:

4,600-lb Capacity. Upgrade your rear suspension by installing these helper leaf springs above your vehicle's factory leaf springs. They significantly reduce sway and prevent sagging, which is perfect for those who often tow or haul heavy loads.

Installation Notes:

No drilling required for installation

Product can be used for vehicles with or without factory top overload springs

Application includes models with dual rear wheels

Features:

1,200-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.

Installation Notes:

No drilling required for installation

Features:

6,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

Installation Notes:

No drilling required for installation

Features:

3,500-lb Load leveling capacity. Custom helper springs install above your vehicle's rear factory leaf springs to prevent sagging when towing or hauling heavy loads. Includes bolt-on installation kit.

Installation Notes:

No drilling required for installation

Product replaces the factory overload springs and requires removal of the springs. Removal of overload springs may require U-bolt and center bolt replacement to be purchased locally if factory hardware is not long enough.

Product is designed for vehicles with approximately 3 inch wide springs