Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
950-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
1,500-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Installation Notes:
No drilling required for installation
The mounting kit provides U-bolts with 4 inch leg length. If your existing factory springs have had extra leaves added, or for older Chevrolet 3/4-ton and 1-ton models with thicker factory springs, longer U-bolts may be required (not included).
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling required for installation
Designed for vehicles with a GVWR less than 8,500 lbs
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling required for installation
More Information >Vehicle Suspension Specs:
Features:
For safety and stability, air springs are the perfect partner for your front suspension when you are pushing a plow. Springs fit inside existing coil springs to help level your vehicle, improve braking and handling, and reduce tire wear.
Installation Notes:
No drilling required for installation
More Information >Videos
for Vehicle Suspension
Help Articles
for Vehicle Suspension
Expert Answers
for Vehicle Suspension
For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression…
view full answer...We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...What you're going to need is two of the transfer switches in that case.…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles -…
view full answer...For a standard replacement equalizer for your Dexter 13-122 equalizers…
view full answer...There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…
view full answer...If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…
view full answer...