Expert Review Video:
Spare Tire Bike Racks Specs:
Features:
Pair your door-mounted spare tire with the SR1 to transport 1 or 2 bikes. Sturdy rack adjusts to center bikes on vehicles with offset spares. The mounting brace clamps around tires up to 15" wide, and 3 straps secure rack to tire.
More Information >Spare Tire Bike Racks Specs:
Features:
This rack lets you carry 2 bikes of different sizes and styles on your spare tire. It has dual arms with anti-sway cradles, and it adjusts for various tire sizes and for offset spares. Locks secure your bikes to the rack and the rack to your vehicle.
More Information >Spare Tire Bike Racks Specs:
Features:
This spare-tire-mounted rack lets you carry 2 bikes on folding dual arms. SuperCush anti-sway cradles with ratcheting ZipStrip straps offer safe bike transport. Tool-free installation with universal mounting plate. Includes locks for bikes and rack.
More Information >Spare Tire Bike Racks Specs:
Features:
Lightweight rack lets you carry 3 bikes on your vehicle's spare tire. Arms are offset to fit either the right or left side of your vehicle and the rear bar adjusts to fit over wider spare tires. Attaches with 2 cam-buckle straps.
More Information >Videos
for Spare Tire Bike Racks
Help Articles
for Spare Tire Bike Racks
Expert Answers
for Spare Tire Bike Racks
The Thule Spare Me Bike rack part #TH963PRO and the Yakima Spare Tire part #Y02599 both do come with locks to secure the rack to your spare tire and cable locks to secure the bikes to the carrier. The biggest difference between the two and is only…
view full answer...To move the arms you just need to push up on the spring loaded bolts to release the arms and swing them into place. That will move the arm up and allow you to move it freely back and forth. When you release the end of the arm with the nut and…
view full answer...The Malone Hanger Spare Tire Bike Rack for 3 Bikes #MPG2147 will fit on the 255/70R18 spare tire at the back of your 2021 Ford Bronco. The Malone rack is designed to fit 8" to 10-1/2" wide tires and your tire is 10" wide so…
view full answer...Yes and no. The RockyMounts AfterParty Swing Away Bike Rack #RKY37ZR can be used if your bike has a smaller fender, but if it's a larger fender that covers most of the tire then it won't work as the clamps will damage the fenders.…
view full answer...Good morning, Crystal. We can certainly provide you with three of the TCL65 Trimax Trailer Wheel Chock and Lock #TMX75FR. That said, we do not offer a "keyed alike" option for these locks, nor can we guarantee a specific key number.…
view full answer...The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I had our warehouse measure the mounting studs on the HappiJac Manual Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs #LC736515-4 you mentioned and found that they are 7-1/4" apart on center. I included a diagram of this measurement…
view full answer...The backing plate of the Surco Bike Rack part #BT300 that you referenced attaches to the rim by it sliding over the mounting plate for the wheel and then using the lug nuts that attach the wheel to the vehicle as a way to secure the wheel and the…
view full answer...For a cargo carrier holding a generator at the back of a travel trailer I definitely recommend installing a frame mounted trailer hitch. It is unlikely that a bumper will be rated high enough to carry the generator and carrier and be able to…
view full answer...According to Yakima, the SpareTime Bike Carrier should NOT be used on towed trailers or campers. The combined weight of the bikes and the rack is not really the issue, rather the fact that the rack will be subject to the additional jarring and…
view full answer...For your 2018 Jeep JL Wrangler, I recommend using a weight distribution system, the Husky Center Line Weight Distribution part #HT32215 for 2" hitch ball or part #HT32216 for 2-5/16" hitch ball. The main reason I recommend a weight…
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD