Jeep Seats Specs:
Features:
Retain the classic styling of your factory Jeep seat while enjoying the benefits of modern engineering with a TrailMax II Classic Low Back Vinyl Seat. The seat includes a sturdy frame, closed-cell foam and pressure-responsive springs.
More Information >Jeep Seats Specs:
Features:
Retain the classic styling of your factory Jeep seat while enjoying the benefits of modern engineering with a TrailMax II Classic Low Back Vinyl Seat. The seat includes a sturdy frame, closed-cell foam and pressure-responsive springs.
More Information >Videos
for Jeep Seats
Help Articles
for Jeep Seats
Expert Answers
for Jeep Seats
Hi Joseph, If your leveling system has a round tube design then you won't need the Replacement Swing Bolt #LC314596 and would instead need adapter lugs #LC314592 and shorter swing bolts #LC314595. The adapter lugs can be bolted to the…
view full answer...I went ahead and got those dimensions for you from our warehouse. The Bestop TrailMax II Fold & Tumble - Vinyl Rear Bench #B3944015 measures 33-1/4" wide x 19" deep x 30-3/4" tall (with the headrests extended to the…
view full answer...The Bestop TrailMax II Sport #B3943837 that you referenced measures 20-1/2" wide, 35" high, and 21" from front to back. It fits the following vehicles: 1976 - 1986 Jeep CJ-7 1997 - 2006 Jeep TJ 1987 - 2003 Jeep Wrangler…
view full answer...Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as…
view full answer...Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this…
view full answer...I really like the Roadmaster Quiet Hitch which is part #RM-061 for a 2" shank or part #RM-062 for a 2-1/2" shank. This requires that your hitch receiver have a lip on it (most do) which it uses to put pressure on the shank of your…
view full answer...Assuming you use appropriately sized grade 8 bolts for the Curt Channel Style Adjustable Ball Mount #C45900 there isn't a particular reason you couldn't them and some lock nuts in place of the included pins and clips. Even though the Grade 8…
view full answer...While I can't recommend trying to cook a burger on the Camco RV Portable Propane Campfire w/ Storage Bag, Regulator, and 8' Long Hose #CAM58041 it would be ideal for hot dogs and marshmallows for smores.
view full answer...I recommend using the Titan Chain Slip-On Shoe Chains for Snow and Ice. These are available in 2 sizes. The #TCSC-HX-S-M fits men's shoe sizes 4 to 8-1/2 and the #TCSC-HX-L-XL fits men's shoe sizes 9 to 13. These both have steel spikes for…
view full answer...I went out in the warehouse and measured the etrailer Steel Trailer Fender, part #HP76VR. If you measured the width of the fender including the radius lip portion of the fender it is 10 inches wide everywhere. It is not narrower at the top. The 8-1/4…
view full answer...I went out into our warehouse and measured an etrailer Trailer Fender #HP76VR and found that from the ground straight up to the midpoint of the radius it measures 17-3/4 inches and measured from where the leg touches the ground to the midpoint of the…
view full answer...The Single Axle Trailer Fender #HP76VR that you referenced would work well on your ATV trailer, but these do not have a weight rating so I would not recommend you drive your ATV over them. There should be a way to load your ATV's without…
view full answer...