You're lining up the trailer in the driveway when you realize the plug doesn't match. No time to rewire. You grab the adapter, snap it into place, and the lights fire up. Quick fix, solid connection, and you're back on schedule.Plug-and-Play Design: No cutting or splicing required. Compact Housing: Fits snugly without dangling wires. Weather-Resistant Housing: Helps protect against moisture and road grime. Features to know about Quick Connection with Visual Confirmation This adapter converts your vehicle's 7-way blade socket to a 4-way flat plug, allowing you to tow trailers with different wiring configurations.
Use a Curt electric trailer brake controller with this adapter. Simply plug one end of the adapter into your Curt controller and plug the other end into the Tekonsha, Reese, Draw-Tite, Pro Series, or Tow Ready wiring harness in your vehicle.Features: Adapter modifies your existing Cequent wiring harness so you can install a Curt brake controller Works with Tekonsha, Tow Ready, Draw-Tite, Reese, and Pro Series harnesses No cutting or splicing required One connector end plugs into the existing Cequent wiring harness in your vehicle Other end plugs into the back of your Curt electric brake controller Compatible with time-delayed and proportional brake controllers from Curt Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses Specs: Overall length: 6" Wire length: 3" Limited 1-year warranty Installation of Curt Brake Controller Adapter No hardwiring is required to install this adapter.
Adapter converts from 4 pole wiring on vehicle to 6 pole round plug and 4 pole flat. Additional wire leads for brake and an accessory. 4 Pole to 6 pole and 4 pole vehicle side trailer wiringadapter Includes mounting bracket Includes 3 wire leads Blue - for electric brakes - center pin Red - for auxiliary or hot lead - outside pin White - for the ground Note: The white wire must be grounded to the vehicle frame.
5-Way Flat to 7-Way RV Blade Adapter - Wired This is an adapter that converts the tow vehicle's 7-way blade connector into a 5-way flat pin connector. This model has a short length of wire joining the two connectors. 16" Long Converts a 7-way blade connector into a 5-way flat pin connector
Connect your trailer with a 4-way flat plug to a vehicle with a 7-way RV socket using this simple plug-in adapter.Highlights 7-Way RV to 4-Way Flat: Adapts a vehicle-side 7-way RV socket to work with a trailer-side 4-way flat plug. Flexible Wire Lead: Adds reach and reduces strain at connection point.
... Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.Features: Complete wiring kit connects your RV's tail, brake, and turn signal lights to your towed car Diodes prevent feedback that can damage your vehicle's electrical components Protected from corrosion by powder-coated aluminum casings 7-Wire to 6-wireadapter cord runs power from RV to towed car Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl casing 6-Way socket hardwires to towed car and mounts with included bracket Kit includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way coiled adapter cord 6-Way socket with mounting bracket 1 Butt connector, 1 ring terminal, split loom, and zip ties Made in the USA Specs: Diode max amperage: 85 amps Diode max voltage: 24 volts Coiled cord Max length: 8' Compressed length: 15" Wiring harness length: 27' Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way adapter cable and 6-way car-side socket.Features: Diodes display your RV's brake and turn signals on your towed vehicle's tail lights Prevents feedback that can damage your vehicle's electrical components Resists corrosion with heat-sealed casing 7-Wire to 6-wireadapter cable lets you easily run power from your motorhome to your towed vehicle Coiled to prevent dragging and tangling Resistant to wear and tear with durable vinyl coating 6-Way socket hardwires to towed car and mounts on the front bumper Kit includes: 4 Diodes 4-Wire harness 7-Way to 6-way adapter cord 6-Way socket 12 Spade connectors 4 Quick-splice wire connectors 6 Zip ties 1 Ring terminal Made in the USA Specs: Wiring harness length: 26' Wire gauge: 16 Adapter cord extended length: 7' 1-Year warranty Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pole flat pin connection for towing trailers with hydraulic brakes. ... Features: Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pole flat pin connection for towing a trailer Allows 1 vehicle to tow a camper or boat trailer with hydraulic brakes Handle grip on 7-way plug for easy connection and disconnection Coiled cord stretches and contracts preventing unneeded stress on wires Threaded mounting bracket ensures secure connection to vehicle Specs: Stretched length of cable from plug to plug: 66" 5-way flat plug to coil: 17" 7-way round plug to coil: 7" Length of coiled cable section unstretched: 8" Coiled cable diameter: 1-3/4"
This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. The straight 7-to-6-wireadapter cord is ideal for tow bars with channel guides.Features: Carries your RV's tail, brake, and turn signals to your towed car Prevents feedback that can damage your car's electrical components Runs power from RV to towed car with 7-way to 6-way adapter cord Straight cable is ideal for tow bars with channel guides, such as Roadmaster all-terrain tow bars 6-Way socket wires to harness and mounts on front of towed car with included bracket Includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way adapter cord 6-Way socket with mounting bracket Butt connector, ring terminal, zip ties, and wire loom Limited lifetime warranty Specs: Maximum amperage: 85 amps Maximum voltage: 24 volts Adapter cord: 6-1/2' long Wire gauge: 16 Wiring harness: 30' long Plastic loom: 3' long Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Install your electric brake controller quickly and easily with this custom wiringadapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible.
This complete kit includes everything you need to carry your RV's brake and turn signals to your towed car's tail lights. Diodes prevent electrical feedback. The hybrid coiled/straight adapter cord is ideal for tow bars with channel guides.Features: Carries your RV's tail, brake, and turn signals to your towed car Prevents feedback that can damage your car's electrical components Runs power from RV to towed car with 7-wire to 6-wireadapter cord Straight/coiled hybrid cable is ideal for tow bars with channel guides, such as Roadmaster all-terrain tow bars 6-Way socket wires to harness and mounts on front of towed car with included bracket Includes: 4 Hy-Power diodes 4-Wire harness 7-Way to 6-way hybrid adapter cord 6-Way socket with mounting bracket Butt connector, ring terminal, zip ties, and wire loom Limited lifetime warranty Specs: Maximum amperage: 85 amps Maximum voltage: 24 volts Adapter cord: 8' long Wire gauge: 16 Wiring harness: 30' long Notes: A brake light relay (RM-88400 - sold separately) may be required if used with a flat tow brake system.
Replace your Coleman Mach, Dometic, or Advent Air RV AC unit with a Furrion Chill AC (sold separately) using this adapterwiring kit. This kit should only be used for AC units from 2025 and newer that have the R32 refrigerant.Highlights Furrion Chill Adapter Kit: Replace your Coleman Mach, Dometic, or Advent Air RV AC R32 Refrigerant: Only works with RV AC units from 2025 and newer 4 Conversion Brackets: Makes sure your AC is mounted at the correct height Includes Mounting Hardware: Bolts on and connects to existing air distribution box and thermostat Specs Dimensions: Wireadapter: 14-3/4" long Conversion brackets: 1-1/4" wide x 2-3/4" tall Notes: Fits all Coleman air distribution boxes except Airxcel Deluxe If your RV AC system has the old R410a refrigerant, you'll need adapterwiring kit C-FACR15SA-A01 Does not work for Furrion Chill Cube RV ACs
Replace your Coleman Mach, Dometic, or Advent Air RV AC unit with a Furrion Chill AC (sold separately) using this adapterwiring kit. This kit should only be used for AC units from 2024 and earlier that have the R410a refrigerant.Highlights Furrion Chill Adapter Kit: Replace your Coleman Mach, Dometic, or Advent Air RV AC R410 Refrigerant: Only works with RV AC units from 2024 and earlier 4 Conversion Brackets: Makes sure your AC is mounted at the correct height Includes Mounting Hardware: Bolts on and connects to existing air distribution box and thermostat Specs Dimensions: Wireadapter: 14-3/4" long Conversion brackets: 1-1/4" wide x 2-3/4" tall Notes: Fits all Coleman air distribution boxes except Airxcel Deluxe If your RV AC system has the new R32 refrigerant, you'll need adapterwiring kit FR67AD Does not work with Furrion Chill Cube RV ACs
Wiringadapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Curt brake controller wiring harness. ... Features: Wiringadapter lets you easily connect your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller to your existing Curt brake controller wiring harness No need to remove your existing wiring harness when replacing your old brake controller One end plugs into Curt wiring harness Other end plugs into your Tow-Pro electric brake controller Some wire splicing required for Tow-Pro Classic (331-EBRHV2) 2-Year warranty
Install your electric brake controller quickly and easily with this custom wiringadapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter. This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible.
Trailer adapter converts a tow vehicle's 7-pole wiring connection to a 5-pin Delphi connection and a 2-pin camera connection for towing trailers with a backup camera. ... Features: Converts a tow vehicle's 7-pole wiring connection to a 5-pin Delphi trailer connection and a 2-pin camera connection for towing trailers with a backup camera Handle grip on 7-way plug for easy connection and disconnection Coiled cord stretches and contracts preventing unneeded stress on wires Threaded mounting bracket ensures secure connection to vehicle
Install your Curt electric trailer brake controller quickly and easily with this custom wiringadapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.To install this adapter in those vehicles, hardwiring is required. Installation of Curt Brake Controller Adapter To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle.
Wiringadapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. ... Features: Wiringadapter lets you easily connect your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller to your existing Tekonsha brake controller wiring harness No need to remove your existing wiring harness when replacing your old brake controller One end plugs into Tekonsha wiring harness Other end plugs into your Tow-Pro electric brake controller Some wire splicing required for Tow-Pro Classic (331-EBRHV2) 2-Year warranty
This wiringadapter is designed for vehicles that do not come equipped with a factory brake control wiring harness port. One end plugs into your Curt trailer brake controller while the other end splices into your vehicle's wiring.If your vehicle has a factory tow package, just splice the pigtail end of the adapter into your vehicle's factory brake control harness wiring, and then plug the other end of the adapter into the controller. If your vehicle doesn't have a factory tow package, you'll have to hardwire the pigtail end of the adapter into your vehicle's wiring.
Install your Curt electric trailer brake controller quickly and easily with this custom wiringadapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.Features: Plug-in wiringadapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Curt Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses 2' Long, 12-gauge wires have protective covering to deter damage Limited 1-year warranty Installation of Curt Brake Controller Adapter To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle.
You've got a 4-flat on the vehicle and a 7-way on the trailer. No time to rewire. You grab this adapter, plug it in, and the built-in lights confirm the signals are live. Now you just need to load up and hit the road.Weather-Resistant Housing: Helps protect against moisture and road grime. Features to know about Quick Adapter with Signal Check This TowSmart ProClass adapter converts your 4-flat vehicle wiring to fit a 7-way trailer plug. It's a plug-and-play solution for light-duty towing.
... Bright LEDs mount inside your vehicle's tail light housings, with the wiring out of sight. Includes 7-to-6-wireadapter cable and 6-wire socket.Features: LEDs display your RV's tail, turn, and brake signals on your towed car without tapping into its wiring Avoids risk of damage from electrical feedback Has no effect on your warranty Mounts inside car's tail light housing - requires drilling a 1" hole Shines brighter and more efficiently than incandescent bulbs 7-Way to 6-way adapter cord runs power from the motorhome to the towed car Coiled to prevent dragging and tangling Resistant to the elements with vinyl coating 6-Way socket hardwires to towed car and mounts on front bumper Kit includes: 2 Red bulbs with sockets 4-Wire harness 7-Way to 6-way adapter cable 6-Way socket Butt connectors, zip-ties, wire loom, and installation hardware Made in the USA Specs: Adapter cord length: 8' when extended 16 Gauge Wiring harness length: 27' Light output per bulb: 450 lumens Overall length of bulb: 2-1/2" Length of bulb from flange to top of bulb: 2" Wire loom: Length: 3' Diameter: 1/2" 1-Year limited warranty Note: Check that there will be enough room in each tail light housing for the extra bulb and socket.
Install your Curt electric trailer brake controller quickly and easily with this custom wiringadapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.Features: Plug-in wiringadapter allows for quick, simple installation of your electric trailer brake controller No cutting or splicing required Custom connector end plugs into the built-in port beneath the dash of your vehicle Other end plugs into the back of your electric brake controller Compatible with time-delayed and proportional brake controllers from Curt Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses 2' Long, 12-gauge wires have protective covering to deter damage Limited 1-year warranty Installation of Curt Brake Controller Adapter To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle.
Filters
