Store your boat fenders on deck when they're not deployed with this 3-fender rack. Rack folds up for storage in your cabin or boathouse when the boating season is over. ... Features: Fender rack lets you store your boat's fenders on deck when they're not deployed Holds (3) 9" - 11" diameter fenders No assembly required - just unfold and hook onto your boat's 7/8" rail Use J-hook (36932191 - sold separately) to hang on 1" or 1-1/2" rails Foldable for easy storage in your boathouse during the off-season Rustproof 316 stainless steel can handle freshwater or saltwater Specs: Application: 7/8" boat rails Capacity: 3 fenders Sturdy, Rustproof Stainless Steel Construction This fender rack is made of heavy-duty 316 stainless steel, which is highly resistant to rust and corrosion, making it great for freshwater and saltwater use.
Store your boat fenders on deck when they're not deployed with this 3-fender rack. Rack folds up for storage in your cabin or boathouse when the boating season is over. ... Features: Fender rack lets you store your boat's fenders on deck when they're not deployed Holds (3) 7" - 9" diameter fenders No assembly required - just unfold and hook onto your boat's 7/8" rail Use J-hook (36932191 - sold separately) to hang on 1" or 1-1/2" rails Foldable for easy storage in your boathouse during the off-season Rustproof 316 stainless steel can handle freshwater or saltwater Specs: Application: 7/8" boat rails Capacity: 3 fenders Sturdy, Rustproof Stainless Steel Construction This fender rack is made of heavy-duty 316 stainless steel, which is highly resistant to rust and corrosion, making it great for freshwater and saltwater use.
Get 6 super rust-resistant hub-rotor assemblies - complete with inner (25580) and outer (14125A) bearings - and an electric-over-hydraulic actuator that works with your existing brake controller for stellar performance. Includes lines and fittings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Includes electric-over-hydraulic actuator to activate brakes when your brake controller signals No lag or delay - gives you more braking control than a surge-type actuator Compatible with most in-cab brake controllers (sold separately) Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Delivers smooth, even braking with fast response time Kevlar brake pads dissipate heat and resist wear and tear extremely well Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Comes with EOH actuator; 6 integral hub-rotors with bearings, races, seals, caps, bolts, and lug nuts; calipers; brackets; and necessary hydraulic lines and fittings Rubber hoses meet DOT and SAE standards and are easier to install than rigid steel lines Specs: Application: triple-axle trailers Axle capacity: 7,000 lbs Wheel size range: 15" to 17-1/2" Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" Warranty: 7-Year on brakes 2-Year on actuator Alpha G1600 Electric Over Hydraulic Actuator Specs: Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 28.7 oz - DOT 4 fluid Wiring configuration: Black: 12V DC power Blue: brake controller Yellow: breakaway White: ground Bearing, Race, and Seal Information: Bearings: Inner bearing: 25580 Outer bearing: 14125A Races: Inner race: 25520 Outer race: 14276 Grease seal: 10-36 Hydraulic Brake Line Kit Includes: (1) 20' Rubber brake line (3) 6' Rubber brake lines (2) 3' Rubber brake lines (3) 18" Rubber brake lines 1 Brass 3-way T-fitting 2 Brass cross fittings 14 Brake line clamps 17 Stainless steel mounting screws 18 Zip ties DeeMaxx Electric-Over-Hydraulic Actuator vs.
9/16" Wheel bolts are included in this brake kit. Allows you to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: Dacromet-coated brake kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, races, and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 9/16" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Slip-on, cast iron, over-the-hub rotors Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including over-the-hub rotors Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
14" x 6-7/8" Rectangle. Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. ... Features: Triple LED trailer light provides stop, turn, tail, and backup light function LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base and lens Red and clear lens over white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included Wire functions: Red: stop and turn White: ground Black: tail lights Purple: reverse or backup DOT and SAE compliant Meets FMVSS 108 requirements for automotive lighting Assembled in the USA Specs: Overall dimensions: 14" long x 6-7/8" tall x 1" deep Quantity: 1 1-Year limited warranty
Kit includes everything you need to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: All-inclusive kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, caps, races and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 1/2" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
This kit includes everything you need to upgrade your triple-axle boat trailer or camper to disc brakes for improved performance and greater stopping power. The Maxx coating is even better than Dacromet for superior corrosion protection.
Triple-axle trailers put a lot of demand on your brakes, especially when you're hauling heavy equipment at highway speeds. This DeeMaxx kit replaces drum brakes with hydraulic disc brakes for more consistent stopping power during long tows.Fast 1,600 PSI EOH Actuation: Reaches 1,000 psi in 3/16 of a second for responsive braking. 1-Piece Hub And Rotor Design: Helps limit moisture intrusion and supports consistent wear patterns. Complete Triple-Axle Brake Line Kit Included: DOT-compliant hoses and fittings simplify installation. Features to know about True Disc Brake Performance For Triple Axle Trailers Triple-axle trailers carry serious weight, and drum brakes can struggle with heat and consistency.
Triple-axle trailers put a lot of demand on your brakes, especially when you're towing heavy loads at highway speeds. This DeeMaxx kit replaces drum brakes with hydraulic disc brakes for more consistent stopping power during long tows.Fast 1,600 PSI EOH Actuation: Reaches 1,000 psi in 3/16 of a second for responsive braking. 1-Piece Hub And Rotor Design: Helps limit moisture intrusion and supports consistent wear patterns. Complete Triple-Axle Brake Line Kit Included: DOT-compliant hoses and fittings simplify installation. Features to know about True Disc Brake Performance For Triple Axle Trailers Triple-axle trailers carry serious weight, and drum brakes can struggle with heat and consistency.
Triple-axle trailers put a lot of demand on your brakes, especially when you're towing heavy machinery at highway speeds. This DeeMaxx kit replaces drum brakes with hydraulic disc brakes for more consistent stopping power during long tows.Fast 1,600 PSI EOH Actuation: Reaches 1,000 psi in 3/16 of a second for responsive braking. 1-Piece Hub And Rotor Design: Helps limit moisture intrusion and supports consistent wear patterns. Complete Triple-Axle Brake Line Kit Included: DOT-compliant hoses and fittings simplify installation. Features to know about True Disc Brake Performance For Triple Axle Trailers Triple-axle trailers carry serious weight, and drum brakes can struggle with heat and consistency.
Upgrade to disc brakes with 6 super rust-resistant slip-on rotors and an electric-over-hydraulic actuator that works with your existing brake controller, and get outstanding braking performance. Includes hydraulic lines and fittings.Features: Lets you upgrade your trailer from an idler axle to a braking axle for superior performance Includes electric-over-hydraulic actuator to activate brakes when your brake controller signals No lag or delay - gives you more braking control than a surge-type actuator Compatible with most in-cab brake controllers (sold separately) Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on slip-on rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Delivers smooth, even braking with fast response time Kevlar brake pads dissipate heat and resist wear and tear extremely well Stainless steel piston provides fast, responsive braking Slip-on, over-the-hub rotors fit over standard idler hubs and are held in place by your existing wheel bolts No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Comes with EOH actuator, 6 slip-on rotors, calipers, brackets, and necessary hydraulic lines and fittings Rubber hoses meet DOT and SAE standards and are easier to install than rigid steel lines Specs: Application: triple-axle trailers Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 1/2" Warranty: 7-Year on brakes 2-Year on actuator Alpha G1600 Electric Over Hydraulic Actuator Specs: Maximum output pressure: 1,600 psi Dimensions: 10" long x 3-5/8" wide x 6" tall Mounting holes center-to-center: 10-7/8" long x 1-5/8" wide Power: 12V DC (minimum 30 amp circuit) Current draw at full pressure: 18-24 amps Hydraulic port size: 3/16" inverted flare (standard brake line fitting) Tank: 15.7 oz - DOT 4 fluid Wiring configuration: Black: 12V DC power Blue: brake controller Yellow: breakaway White: ground Hydraulic Brake Line Kit Includes: (1) 20' Rubber brake line (3) 6' Rubber brake lines (2) 3' Rubber brake lines (3) 18" Rubber brake lines 1 Brass 3-way T-fitting 2 Brass cross fittings 14 Brake line clamps 17 Stainless steel mounting screws 18 Zip ties DeeMaxx Electric-Over-Hydraulic Actuator vs.
This reversible 2-LED fender light keeps replacement simple since the same symmetrical assembly works on either side of your trailer. The sonically sealed housing is submersible, while the amber/red lens puts both colors in one compact light.Bracket Included: Black mounting bracket comes with the light for installation on your fender. Features to know about One Light Works on Either Fender Replacing a fender light doesn't require tracking down separate driver- and passenger-side versions.
Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Light pops out of bracket and flips around to switch sides Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lenses and housings Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 8-1/2" long x 1-11/16" tall x 13/16" deep Mounting hole dimensions (center to center): 1" Diodes: 2 Power draw at 12.8 volts: 0.033 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof, 2-LED marker light with chrome trim can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount. 2-Wire pigtail. P2 rated.Features: 2-Sided clearance light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lenses with red and amber LEDs Chrome-plated ABS plastic trim snaps on for a finished look Mounts on surface of trailer - hardware not included 2-Wire pigtail with power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 1-5/8" long x 13/16" tall x 1-1/4" wide Distance between mounting holes (center to center): 1-1/4" Diodes: 2 Power draw at 12.8 volts: 0.04 amps Quantity: 1 fender clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: passenger side Driver side: BA44FNL - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.Features: Dual-face incandescent trailer light installs on your trailer fender Amber light faces the front of trailer Red light faces the rear of trailer Built-in reflex reflector removes the need for a separate reflector Incandescent bulbs can be easily replaced Druable polycarbonate housing and lens Red and amber lens over incandescent bulbs Compatible with 12V DC systems Surface mount with included mounting bracket Installation hardware not included Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: driver side Passenger side: BA44FNR - sold separately Dimensions: 8-1/2" long x 3-1/4" wide Distance between mounting holes (center on center): 1-1/2" Bulb type: 194 Number of bulbs: 2 Power draw at 12.8V: 0.4 amps 3-Year warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3-3/4" x 7/8" Oblong. Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. 2-Wire pigtail. P2 rated.Features: Dual-face LED trailer light installs on your trailer fender Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC systems Surface mount on trailer with included bracket 2-Wire pigtail with power lead and ground wire P2 rated light produces a 90-degree beam pattern Specs: Quantity: 1 fender light Dimensions with bracket: 3-3/4" long x 7/8" tall x 13/16" thick Distance between mounting holes (center on center): 3" Diodes: 2 Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Weatherproof clearance/marker light installs on your driver-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for driver side fender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: driver side (left side) Passenger side: DG52443VP (sold separately) Quantity: 1 fender light Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
Weatherproof clearance/marker light installs on your passenger-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-wire pigtail. P2 rated.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Designed for passenger side fender Weatherproof housing and lens protect against water damage LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Mounts on surface of trailer with black ABS plastic bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Configuration: passenger side (right side) Driver side: DG52444VP (sold separately) Quantity: 1 fender light Diodes: 2 Overall dimensions: 6-1/4" long x 2-1/8" wide x 3/4" deep Distance between mounting holes (center on center): 1-1/16" 1-Year limited warranty
3-7/8" x 1-1/4" Rectangle. Trailer fender light functions as both amber front clearance and red rear clearance light. Hard-wired terminals are potted with polyurethane. Surface mounts with bracket (sold separately). ... Features: Dual-face LED trailer light functions as both amber front clearance and red rear clearance light Great for boat, cargo, and horse trailers LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate base with acrylic lens Amber and red lenses with amber and red LEDs Compatible with 12V DC systems Mounts on surface of trailer fender with bracket (sold separately) - hardware not included Designed for top or side placement at widest point of trailer Accepts industry standard 2-prong plug P2 rated light produces a 90-degree beam pattern DOT compliant Specs: Overall dimensions: 3-7/8" long x 1-1/4" tall x 7/8" deep Bolt hole radius: 3-1/16" Diodes: 2 Power draw at 12V: 0.08 amps Limited lifetime warranty P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
3-7/8" x 1-1/4" Rectangle. Waterproof, 2-LED trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Surface mount with bracket (sold separately). Accepts 1-prong or 2-prong plug. ... Features: Dual-face LED trailer light installs on your trailer fender Amber light faces front of trailer Red light faces rear of trailer Thinline Series has a low profile so that light can fit in tight spaces Sonically sealed, waterproof unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Red and amber lens over white LEDs Compatible with 12V DC electrical systems Surface mount with bracket (A65B - sold separately) Accepts industry standard 1-prong plug (A65P - sold separately) P2 rated Specs: Dimensions: 3-7/8" long x 1-1/4" wide x 7/8" thick Distance between mounting holes (center on center): 3" Diodes: 2 Power draw at 12.8V: 0.048 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Waterproof LED clearance/marker light installs on your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with ABS plastic base. 2-Wire pigtail.Features: Dual clearance light installs on your trailer fender Amber lens faces front of trailer Red lens faces rear of trailer Reversible assembly can be installed on either driver's-side or passenger's-side fender Sealed, waterproof unit includes durable, polycarbonate housing and UV-resistant lens Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LEDs are energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Clear lens over red and amber LEDs Surface-mount installation - hardware not included Available cover (TN88XR) adds a protective case for the light 2-Wire pigtail White wire for ground Red wire for power Meets or exceeds FMVSS 108 standards Specs: Quantity: 1 fender light Dimensions: 1-1/2" long x 3/4" wide x 3/4" deep Distance between mounting holes (center on center): 1" Diodes: 2 Input voltage: 9V - 14V Power draw: 0.04 - 0.07 amps Wire length: 9" IP rated: 68 Limited lifetime warranty
Filters
