Wire your vehicle to tow a trailer with surge brakes by installing this universal, splice-in kit. Includes 5-way flat connector, 60" of bonded wire and installation hardware. ... Features: 5-Way flat trailer connector at the back of your vehicle powers your trailer's signal lights Fifth pin provides connection to reverse lights to allow proper functioning of hydraulic brake actuator Compatible with 4-way flat connectors Rubber-molded connector and bonded wire offer maximum durability Simple installation - hardwires to existing wiring Specs: Application: vehicles with 2-wire lighting systems Lead length: 60" Wire configuration: Blue: reverse lights Yellow: left turn and brake lights Green: right turn and brake lights Brown: tail lights White: ground Limited 1-year warranty
Leadwire adapts a hardwired harness to a 0.180" bullet connector.Features: Leadwire adapts hardwired harness to bullet connector Stripped wire on one end 0.180" Female bullet connector on the other end Black wire Length: 7-1/2" Assembled in the USA
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10" Pigtail is a direct replacement for: Uni Bond PT9530 Truck Lite 94993 Grote 66843-3 Peterson 421-491
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 6" Pigtail is a direct replacement for: Uni Bond # PT6020 Wesbar # 108662 Truck Lite # 94902 Grote # 67050 Peterson #142-49 Bargman # 40-00-002
This 3-wire pigtail has a female plug on one end that pairs with the weathertight connection on the back of your Optronics light. Color-coded wirelead is 10" long. ... Features: Pigtail with weathertight plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights that have a weathertight connection Female weathertight plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10"
This pigtail gives you a simple, weather-tight way to hook your stop/tail/turn light into your trailerwiring without guessing which wire goes where. Plug it in, match the colors, bolt the ground, and you're done.Solid Ground Connection: Pre-crimped #10 ring terminal on the ground wire makes it easy to bolt to a clean ground point. Compact Lead Length: 6" wirelead keeps connections close to the light for a clean, easy-to-manage install.
This 2-wire pigtail has a plug on one end that pairs with the weathertight connection on the back of your Optronics light. Color-coded wirelead is 10" long. ... Features: Pigtail with weathertight plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics backup lights that have a weathertight connection Female weathertight plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for backup light #10 Ring terminal on ground wireWire length: 10"
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wirelead is 10" long. ... Features: Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wire 20-Gauge wire Approximate wire length: 10" Pigtail is a direct replacement for: Uni Bond PT9180 Wesbar 729063 Truck Lite 94926-3 Grote 67000 Peterson 431-491 Bargman 40-00-003
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wirelead is 18" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power #10 Ring terminal on ground wireWire length: 18" Pigtail is a direct replacement for: Wesbar 108663 Peterson B142-50
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Color-coded wirelead is 10-1/2" long. ... Features: Pigtail with 3-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10-1/2"
Plug in Peterson LED lights fast with this AMP-style pigtail. Blunt-cut leads give you wiring flexibility, and the 7-3/4" length makes routing easy. Seals tight for a weather-resistant connection you can trust on every haul.Ideal for Submersible and Enclosed Applications Because of its weather-resistant AMP connection, this pigtail is an ideal match for lights on boat trailers, enclosed trailers, and other builds where corrosion resistance is critical. Specs Dimensions: Wire length: 7-3/4" overall lead length Connector Type: AMP-style female connector on one end Blunt cut wires on the other end Wiring: White ground wire (stripped, no terminal) Black power wire (stripped, no terminal) Compatibility: Peterson 173, 175, 189, 190, 192, 193, 194, 195, 197, 199, 905, and 906 series LED lights Works with AMP-compatible sealed light receptacles Country of Origin: Assembled in the USA
... Right-angle plug allows wires to run down from light instead of straight out the back.Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson 152 series, 153 series, 154 series, and 161 series lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Female molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for tail light #10 Ring terminal on ground wireWire length: 6" Made in the USA
This 2-wire pigtail has a male plug to connect to the female socket on your trailer light. 6" Power wire splices into your trailer's wiring. ... Features: Pigtail with 2-prong plug allows you to wire your light to your trailer Designed for use with side marker, clearance, and utility lights Simple installation Connect plug to the back of your trailer light Splice loose wire into existing wiring on your trailer Made in the USA Specs: Wire length: 6" Wiring configuration White: ground Black: power Pigtail is a direct replacement for: Uni Bond: PT6020 Wesbar: 108662 Truck Lite: 94902 Grote: 67050 Bargman: 40-00-002
Plug - Single Wire with 12" Lead for A91 and AL91 Series Trailer Clearance and Side Marker Lights A single-wire, molded plug with 12" lead for use with Series 91 lights (A, AL, LP).
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 3-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson stop/tail/turn lights, parking/turn lights, and warning lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light 3-Wire pigtail White wire for ground Black wire for tail light Red wire for turn signal #10 Ring terminal on ground wireWire length: 10-1/2"
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson side marker, clearance, and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power #10 Ring terminal on ground wireWire length: 6" Made in the USA
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Designed for backup and utility lights. 19" Lead.Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wireWire length: 19"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Peterson light. Right-angle plug allows wires to run down from light instead of straight out the back. ... Features: Pigtail with 2-prong plug allows you to wire your Peterson light to your trailer Designed specifically for use with Peterson backup and utility lights Right-angle design of plug allows wiring to run down from the light rather than straight out of the back Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for power #10 Ring terminal on ground wireWire length: 10-1/2"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wirelead is 75" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 75"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wirelead is 135" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 135"
This 2-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wirelead is 36" long. ... Features: Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer Designed specifically for use with Optronics side marker, clearance, and utility lights Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light 2-Wire pigtail White wire for ground Black wire for power Wire length: 36"
... Color-coded wirelead is 8" long.Features: Pigtail with weathertight plug allows you to wire your Peterson 417, 418, 420, or 423 series LED light to your trailer Female weathertight plug connects to back of trailer light 2-Wire pigtail White wire for ground Red wire for backup light #10 Ring terminal on ground wire Heat-shrink tubing for additional corrosion resistance Wire length: 8" Made in the USA
This leadwire works in conjunction with the Peterson trailer light mounting bracket for 152-Series lights.Features: Leadwire works in conjunction with mounting brackets for Peterson 152-series lights (sold separately)
This kit includes a junction box so you can quickly and easily connect the wires from the included trailer connector to your trailer's wiring.Features: Kit allows you to upgrade from a 4-way, 5-way, or 6-way connector to a 7-way connector Pre-wired, 7-way, blade-style, trailer-end connector lets you connect your trailer to your vehicle Flexible cable allows for easy positioning Weatherproof, heavy-duty plastic junction box protects wires and terminals from the elements Wire functions: Black: 12 volt power Yellow: auxiliary or reverse signal Red: left brake and turn signal Green: running lights Brown: right brake and turn signal Blue: trailer brakes Ring terminals included Specs: Overall box dimensions: 8-1/8" long x 3-3/8" wide x 2-5/16" tall Distance between mounting holes (on center): 7-3/8" Lid dimensions: 6-5/8" long x 3-3/8" wide Cord dimensions (not including junction box): 5'-5" long x 5/8" diameter Overall length including junction box: 6'
Filters
