4-3/8" x 1-15/16" Oval. Red trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. ... Features: Red trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
Clamp this durable steel, folding spare tire carrier onto your trailer or RV bumper. Fits 4" wide, rear, box-style bumpers. Holds most standard automotive and camper tires.Features: Provides removable mounting point on your trailer or motor home rear bumper for a spare tire Swings down to allow quick, easy access to rear storage Remove pull pin at base and fold carrier down Holds most Kelsey-Hayes-style 5-, 6- and 8-lug automotive wheels and Fayette-type travel trailer wheels Will not fit 5-on-5 bolt pattern wheels Not for Class A or C motorhome tires or dual rim wheels Clamps onto 4" wide box bumpers Constructed of heavy-duty steel Powder coated for premium rust resistance Capacity: 60 lbs Lifetime warranty
4-3/8" x 1-15/16" Oval. Amber trailer reflector enhances visibility on the road. Durable acrylic construction. Self-adhesive backing allows for stick-on application. Screw holes for surface mounting. ... Features: Amber trailer reflector enhances visibility on the road Durable acrylic construction Adhesive backing allows for easy stick-on application Screw holes allow for surface mounting - hardware not included Meets FMVSS 108 when properly applied Specs: Dimensions: 4-3/8" long x 1-15/16" wide Distance between mount holes (center on center): 4-5/16" 1-Year limited warranty
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.But sometimes it can be a real pain in the arm to crank your boat trailer up and down, even when the sun and rain isn't beating down on you. Trailer Valet was thinking of you when they made this jack.
You're hauling equipment, not lawn chairs. The trailer's loaded and this jack's ready. It welds to the frame, slides on when you need it, and lifts with a drill or by hand. When you're done, pull it off and toss it in the truck.Highlights Weld-On Pipe Mount: Male pipe bracket welds to trailer; jack slides off for security or storage. Drill or Manual Operation: Includes hand crank and Trailer Valet drill attachment.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
Free up space on your trailer with this spare tire carrier. It mounts on your trailer's angle-iron railing with the included thread-locking bolt, so there's no drilling required. ... Features: Convenient carrier lets you mount a spare tire on your trailer's angle-iron railing Frees up space for other gear Fits most common bolt patterns and wheels up to 15" Easy installation with included hardware - no drilling required Place angle-iron bracket on the interior of the rail Slide spare tire bracket into angle-iron bracket and bolt them together with thread-locking bolt Use remaining bolts to secure your spare tire Sturdy steel construction with black powder coat finish is rust resistant Specs: Application: 12" to 15" wheels Maximum tire width: 8" Trailer frame dimensions: 1-1/2" - 2" long x 1/8" - 1/4" thick Compatible bolt patterns: 4 on 4 5 on 4-1/2 5 on 5 6 on 5-1/2 8 on 6-1/2 Dimensions of bracket: 8-1/8" wide x 3" tall Distance from outside edge of bracket to trailer railing Minimum: 4-1/2" Maximum: 5" Weight: 4 lbs This spare tire carrier lets you clear up space on your trailer for more gear.
When your trailer just needs a little adjustment, this 2" drop gets it there. The ball is already installed, so you can slide it into your receiver, line up your trailer, and get moving.Highlights Keep Your Trailer Level While Towing: 2" drop helps match trailer height to your tow vehicle. Handle Lighter Loads With Confidence: Rated for 5,000 lbs towing and 500 lbs tongue weight.
Back up, line it up, and set it on the ball. The 4" drop helps get your trailer sitting right, and with the ball already installed, you can slide it into your receiver and get moving.Highlights Keep Your Trailer Level While Towing: 4" drop helps match trailer height to your tow vehicle. Handle Medium-Duty Loads With Confidence: Rated for 6,000 lbs towing and 600 lbs tongue weight.
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 7" Long U-bolts (1755892) (2) U-Bolt plates for 1-3/4" springs (TP-3000175) (8) 1/2"-20 Hex nuts (12N) Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 3" Typical 5,200-lb to 7,000-lb axle Spring width: 1-3/4" Thread dimensions: 2" long x 1/2"-20 Dimensions: see below
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates and nuts included.Features: Attaches trailer axle to leaf springs Includes: (4) 5-1/2" Long U-bolts (2) U-Bolt plates for 1-3/4" springs (8) 7/16"-20 Hex nuts Spring seats required for mounting axle to leaf spring sold separately Specs: Axle diameter: 2-3/8" Typical 3,500-lb axle Spring width: 1-3/4" Dimensions: see below
This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.It's best to mount the Autowbrake close to your trailer junction box, which is typically located on the trailer frame. That said, you have complete freedom to install it wherever works best for you: inside a trailer compartment, under or along the side of the frame, or inside a storage cabinet or toolbox.
Mount your round, 2-3/8" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 2-3/8" diameter axle Typical 3,500-lb axle U-bolt dimensions Inner width: 2-7/16" Length: 5-1/2" Diameter: 1/2"
Mount your square, 2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Made in the USA Specs: Application: 2" wide, square axle U-bolt dimensions Inner width: 2-1/8" Length: 4-1/2" Diameter: 1/2"
Features: Heavy duty steel construction Fits wheel sizes 9" to 14" Fits trailer frames up to 3" wide x 5" tall Mounting hardware included to install on trailer and hold tire on carrier Zinc plated TUFFPLATE finish Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Mount your round, 3" diameter axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 1/2" Hex nuts and washers Spring seats (sold separately) required for mounting axle to leaf spring Made in the USA Specs: Application: 3" diameter axle Typical 5,200-lb to 7,000-lb axle U-bolt dimensions Inner width: 3-1/8" Length: 7" Diameter: 1/2"
Mount your square, 1-1/2" wide axle to your trailer's leaf springs with this U-bolt kit. U-bolts, plates, nuts, and washers included. ... Features: Mounting kit attaches trailer axle to leaf springs Galvanized plates and zinc-plated hardware resists rust and corrosion Made in the USA Specs: Application: 1-1/2" wide, square axle U-bolt dimensions: Inner: 3-5/16" Long x 1-5/8" wide Overall: 3-5/8" Long x 2-3/8" wide Thread dimensions: 2-1/2" long x 3/8" diameter Mounting plate dimensions: 3-3/8" long x 3" wide Kit includes: 4 U-bolts 2 U-bolt plates for 1-3/4" springs (8) 3/8" Hex nuts and washers
Trailer tongue tire carrier mounts your spare tire up and out of the way. Base attaches around trailer tongues up to 4" tall x 3-1/2" wide. ... Features: Provides a mounting point for your trailer's spare tire Black powder coat finish offers excellent corrosion resistance 500-Hour salt spray rating Trailer installation mounting hardware included Spare tire installation hardware not included Made in the USA Specs: Secures around trailer tongue up to 4" tall x 3-1/2" wide Fits: bolt patterns from 4 on 4" to 8 on 6-1/2"
8-3/8" Long x 3-1/16" wide x 7/16" diameter, square U-bolt lets you safely mount a spare tire on your trailer. Constructed of zinc-plated steel, it holds 4-lug and 5-lug wheels up to 15" and includes 2 lug nuts.Features: Heavy duty carrier provides a mounting point for your trailer's spare tire Zinc-plated steel construction is sturdy and long-lasting Includes 2 lug nuts Made in USA Specs: Fits 4-lug and 5-lug wheels, up to 15" Application: trailer tongues up to 3" wide Dimensions: 8-3/8" long x 3-1/16" wide x 7/16" diameter
5-3/8" Waterproof light with built-in rear reflex reflector displays brake, tail, and turn signals on your trailer. Mounts on the surface of the trailer and hardwires with the 3-wire pigtail harness.Features: Round brake, tail, and turn signal light Built-in rear reflex reflector Waterproof - great for boat trailers White LEDs with red lens More efficient and durable than incandescent bulbs Polycarbonate base with acrylic lens Surface mount with built-in flange Hardware not included 3-Wire pigtail harness hardwires to the trailer White wire for ground Brown wire for tail lights Red wire for stop and turn lights DOT and SAE compliant Meets FMVSS 108 requirements Assembled in the USA Specs: Dimensions: 5-3/8" diameter x 5/8" thick Compatible with 12V DC systems Diodes: 20 Operating voltage: 9V-16V DC Wire length: 7" 1-Year limited warranty
Trailer tongue tire carrier mounts your spare tire up and out of the way. Base attaches around trailer tongues up to 4" x 4". Accepts wheel bolt pattern from 4 on 4" to 8 on 6-1/2". ... Features: Provides a mounting point for your trailer's spare tire Silver powder coat finish offers excellent corrosion resistance 500-Hour salt spray rating Trailer installation mounting hardware included Hardware to mount spare tire on carrier not included Made in the USA Specs: Secures around trailer tongue up to 4" x 4" Fits: bolt patterns from 4 on 4" to 8 on 6-1/2" Distance between trailer frame mounting holes (center to center): 5" Side to side 4" Front to back
Tri-ball ball mount lets you tow a variety of trailers using a single shank. Just turn the shank so the ball matches your trailer coupler. Hollow steel shank is durable and has a black powder coat finish that resists corrosion.Features: Multi-ball mount has 3 differently sized balls to meet your towing needs To switch between balls, remove ball mount from hitch, rotate, and slide back into receiver Hollow steel shank with black powder coat finish resists corrosion Hitch lock or pin and clip sold separately Specs: Application: 2" x 2" trailer hitch receivers 1-7/8" Ball capacity: Gross towing weight: 2,000 lbs Maximum tongue weight: 200 lbs 2" Ball capacity: Gross towing weight: 6,000 lbs Maximum tongue weight: 600 lbs 2-5/16" Ball capacity: Gross towing weight: 10,000 lbs Maximum tongue weight: 1,000 lbs Overall length: 12" Distance from center of hitch pin hole to center of hitch ball: 2-5/16" ball: 7-1/4" 2" and 1-7/8" balls: 8-1/4" Limited 1-year warranty
Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud. Premium zinc finish offers great rust protection. 10" Screw travel and 8" drop leg.So if you have anything mounted on your trailer tongue that the wheels might hit if they're positioned upright, you can lock them in place facing down instead.
This steel bracket kit holds your spare trailer tire upright in your truck bed or trailer to provide extra space for other gear. Fits 14" and 15" tire-and-wheel assemblies.Features: Bracket holds the spare trailer tire-and-wheel assembly in your truck bed, open trailer, or enclosed trailer Compact design keeps the assembly upright and frees your truck or trailer up for other gear Sturdy steel construction Bright zinc finish Bolt-on installation Tire must rest on the bed floor and up against sidewall when mounted Requires self-tapping screws (not included) Specs: Works with: most 14" and 15" diameter trailer tire-and-wheel assemblies Threaded rod length: 6" Cap diameter: 5"
Filters
