You're loaded up after dark and rolling out. This light handles the signaling and keeps your plate visible. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Eight Functions in One: Covers everything you expect from a full rear trailerlight, plus a few extras. Plated and Legal: Built-in license light on the driver side keeps your plate visible and compliant. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
You're loaded up after dark and rolling out. This light handles the signaling when and where it matters. It's wired in, sealed tight, and built to take the rough roads, water, and bumps along the way.Highlights Seven Functions in One: Covers everything you expect from a full rear trailerlight, plus a few extras. Clean Passenger-Side Fit: Matches the driver-side light without the license plate window. Sealed for Marine Use: Waterproof, dustproof housing is fully submersible and IP68 rated.
Great for cars and trailers with either LED or incandescent bulbs, this kit converts your vehicle's lighting system to match your trailer's. It includes a 4-way flat, wire taps, and a power wire that pulls power directly from your battery.This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
Built to last, this kit, made with surface-mount technology, converts your vehicle's lighting system to match your trailer's. It includes a 60" 4-way flat harness, wire taps, and a power wire that pulls power directly from your battery.This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
It doesn't take much to crack a trailerlight, one rock or bad bump and it's time to replace. This steel guard adds a layer of protection so your lights stay safe on the road and job. ... Highlights Helps Prevent Broken TrailerLights: Steel guard shields lights from road debris and impact. Fits Common Light Sizes: Precut openings fit 6" oval stop-tail-turn and 2" round marker lights.
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Designed for use in applications that face extreme temperatures Safely operates in -40 F to 140 F temperatures Built-in motion sensor activates light when movement is detected LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brigther light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC and 24V DC systems Light output stays consistent at all operating voltages Surface mount - hardware not included 2-Wire design includes power lead and ground wire Specs: Dimensions: 18-1/4" long x 5-3/4" tall x 1-5/64" deep Light output: Effective lumen output: 990 lumens Raw lumen output: 1,400 lumens 8 Diodes Power draw: At 12.8V: 1.61 amps At 24V: 0.80 amps Wire length: 16" Wire gauge: 16 Input voltage: 7V-30V DC Lifetime warranty on LEDs Raw Lumens vs.
18-1/4" x 5-3/4" Rectangle. LED dome light provides bright light in extreme temperatures. Motion sensor activates light when motion detected. Durable polycarbonate housing. ... Features: Low-profile dome light provides bright white light for refrigerated trucks and trailers Designed for use in applications that face extreme temperatures Safely operates in -40 F to 140 F temperatures Built-in motion sensor activates light when movement is detected LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brigther light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens with white LEDs Compatible with 12V DC and 24V DC systems Light output stays consistent at all operating voltages Surface mount - hardware not included 2-Wire design with 0.180 male bullets Specs: Dimensions: 18-1/4" long x 5-3/4" tall x 1-5/64" deep Light output: Effective lumen output: 990 lumens Raw lumen output: 1,400 lumens 8 Diodes Power draw: At 12.8V: 1.61 amps At 24V: 0.80 amps Wire length: 16" Wire gauge: 16 Input voltage: 7V-30V DC Lifetime warranty on LEDs Raw Lumens vs.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring.
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. ... Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Installs with kit 55151 (sold separately) to help run wiring to vehicle battery Color-coded wires ease installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
Install a 4-way trailer connector on your vehicle with this wiring harness with tail light converter. Requires splicing into existing vehicle wiring. Works with domestic and import vehicles. ... Features: Provides a 4-way trailer connector at the back of your vehicle to power your trailer's signal lights Works with domestic and import vehicles Ensures that your vehicle's wiring matches that of your trailer Powered module connects directly to battery to avoid overloading vehicle's electrical system Includes powered converter wiring kit for complete installation Constructed of durable materials Solid-state components are potted to protect against shock, dust, vibration, high temperatures, and humidity Molded rubber female 4-way connector includes a dust cover 1-Year limited warranty Specs: Application: 2- and 3-wire lighting systems Output length: 58" long Power wire: 20' Max Amperage: Turn lights and brake lights: 3.0 Tail lights: 6.0 Wire configuration: Brown: tail lights Green: right turn lights Red: brake lights White: ground Yellow: left turn lights Included in Hardwire Kit: Wiring harness Wire tap connectors Cable ties Self-tapping screw Note: Requires install kit 55151 to help run wire to vehicle battery. 2- And 3-Wire Systems Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring.
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 7 functions Stop, tail, turn, clearance, side marker, side reflector, and rear reflector Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: passenger side Driver side: TN32XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep IP Rating: 68 Total diodes: 7 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.06- 0.09 amps
We think the waterproof seal and potting on this tail light makes it perfect for boat trailers or any light-duty trailer that may be exposed to water - which is all of them. It displays every signal you need: stop, tail, turn, brake, and more.Features: LED tail light provides 8 functions Stop, tail, turn, clearance, side marker, side reflector, rear reflector, and license plate Truly submersible TecSeal urethane potting protects circuit board from vibration and moisture Sonic-welded case IP68 Rating Red impact-resistant lens over red LEDs 1 White LED for license plate More efficient and durable than incandescent bulbs Direct replacement for standard trailerlight Requires (2) 1/4-20 carriage bolts (sold separately) 9" pigtail wires directly into your trailer's wiring DOT compliant Meets FMVSS 108 requirements for narrow and wide vehicles Specs: Configuration: driver's side Passenger side: TN92XR (sold separately) Dimensions: 8" long x 2-7/8" tall x 2-7/8" deep Total diodes: 8 Power draw between 9-14V: Stop: +0.11- 0.15 amps Tail/turn: 0.14- 0.20 amps
Built to last, this tail light converter with a 76" 4-way flat harness is made using surface-mount technology. Designed for vehicles that have amber turn signals and incandescent bulbs. ... This is where a tail light converter comes into play. This converter lets you combine the brake and turn signal functions of your vehicle so they run on a single wire to properly activate your trailer's tail lights.
... It handles the signal translation, so your trailerlights work every time.Features to know about Merges Signals for a Clean 4-Flat Connection This tail light converter lets you tow a trailer with a 4-way flat plug even if your vehicle uses separate turn and brake light circuits. It combines the signals internally and sends them through a single plug.
3/4" Round. Waterproof mini trailerlight with 2 red LEDs functions as both a clearance light and a side marker light when properly mounted. Clear polycarbonate lens. ... Features: Small, round trailerlight functions as both a clearance light and a side marker light when properly mounted Sealed, waterproof construction is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Clear lens with red LEDs Recessed mount with included black PVC grommet Installation requires an 11/16" hole at desired location 2-Wire pigtail - includes power lead and ground wire DOT compliant PC rated Specs: Light dimensions: 3/4" diameter x 7/8" deep Grommet diameter: 11/16" Diodes: 2 Power draw at 12.8 volts: 0.03 amps Lifetime warranty on LEDs Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Features: Helps to protect exterior lights from the elements Designed for (1) 6" oval light and (1) 2" round sidelight (both sold separately) Black powder-coated steel construction Overall dimensions: 8" wide x 3" tall x 3" deep
4-1/2" x 2-7/8" x 1". Low-profile dome light illuminates an RV's interior with bright white light. Toggle switch controls power. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design.Features: Low-profile, rectangular dome light provides bright white light for your trailer's interior Built-in toggle switch controls on/off function Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution Cool white LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provides brighter light with less power output No bulbs to replace - no brittle filaments Clear polycarbonate lens with white LEDS Sonically sealed, waterproof housing and lens Compatible with 12V DC systems Surface mount - hardware not included 2-Wire pigtail - includes power lead and ground wire Specs: Light output: Effective lumen output: 810 lumens Raw lumen output: 1,044 lumens Diodes: 18 Dimensions: 4-1/2" long x 2-7/8" tall x 1" thick Wiring length: 6" Power draw at 12.8V: 0.7 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof TrailerLight The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Water-resistant utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. ... Features: Utility light is perfect for an exterior RV awning setup or inside an enclosed trailer Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Clear plastic lenses is less likely to shatter than a glass lens Textured pattern helps disperse bright light throughout your trailer Durable, black plastic construction is water resistant Bolt-on installation onto the an interior or exterior surface - hardware not included Wires to a light switch inside your RV or trailer - white for ground and black for power Specs: Overall dimensions: 8" long x 1-1/4" tall x 1" deep Mounting hole spacing (center to center): 6-11/16" Voltage: 12V DC Wattage: 6 watts Number of LEDs: 30 1-Year warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Powered converter splices into your vehicle's turn signal wiring. SMT construction boosts water and vibration resistance. Works with 24-volt 2-wire, 3-wire, and PWM systems.If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring.
Utility light brightens up your enclosed trailer for unloading gear after dark or the outside of your RV for those warm summer barbecue nights with the family. ... Features: Utility light is perfect for an exterior RV awning setup or inside an enclosed trailer Included energy-efficient, cool white LEDs last longer and burn brighter than incandescent bulbs Integrated toggle switch lets you turn the light on and off Can also be wired to an interior light switch Clear polycarbonate plastic lens is less likely to shatter than a glass lens Durable, black plastic construction Easy, bolt-on installation onto the surface of your ceiling or wall - hardware not included 2-Wire design hooks up to a 9-volt battery (not included) Specs: Overall dimensions: 5-1/4" long x 2-7/8" wide x 1-7/8" deep Operating voltage: 9V DC Light output: 51 lumens Number of LEDs: 3 1-Year limited warranty Need extra light to load and unload gear from a box truck or enclosed trailer after dark?
Slim left-side 8-function tail light with built-in license plate light. IP68 sealed and truly submersible, it installs with standard bolts and a 12" pigtail to keep your trailer bright and legal mile after mile.Features: Left-side boxlight with 8 functions: stop, turn, tail, side marker, clearance marker, rear reflector, side reflector, license plate light IP68 dust- and waterproof with hermetic seal - sonic-welded, potted electronics are submersible Surface mount installation - hardware not included Impact-resistant lens; meets FMVSS 108 requirements Specs: Measurements: 6" x 3-9/16" x 2-1/4" LEDs: 7 6 Red 1 White for license plate light Color: Red Voltage: 9 to 14 volts Mounting: Uses (2) 1/4-20 carriage bolts (not included) Connector: 12" Pigtail Wire colors: White: ground Brown: brake lights and license plate Green: right turn Yellow: left turn Lifetime warranty TecNiq's 8 Function Slim Line taillight is able to meet all requirements for stop, turn, tail, side marker, clearance marker, rear reflector, side reflector and license plate light in a revolutionary, cost-effective design.
Filters
